Fingerboard Guards
Designed to protect the fingerboard when doing work on your frets. These shields are indispensable when doing any sort of fret work. Being only .010 thick they can bend to accommodate and fingerboard radius. Made of 304 spring stainless steel. Comes with 2 sizes: 3-1/8 x 7/8 x .010 inch - 1/4 inch protection on either side of the fret and 3-1/8 x 0.59 x .010 inch - 3/8 inch protection on either side of the fret.
€6,14
including VAT
19%
, [plus shipping]
Fret Cutter 190mm
Fret Cutter, used to trim the ends of new fret wire close to the fingerboard without leaving marks. Made in Japan. Dimensions: 190mm. 27mm jaw width.
€51,53
including VAT
19%
, [plus shipping]
Fret Press
Handheld fret press is a professional fretting tool that gives you finer control over the pressure needed to seat a fret into the slot - you can actually feel it seating! It eliminates complicated clamping setups, so your press-in fret jobs go faster. There's a self-leveling upper caul that adjusts easily to any neck. Used with Fret Press inserts (available separately) to press frets into guitar fret boards.
€153,37
including VAT
19%
, [plus shipping]
Fret Press Caul
Fret press caul. Perfect for converting your drill press or arbor press into a fret press. 3/8 inch (9,5mm) shank. Includes 2,5 mm hex key.
€35,58
including VAT
19%
, [plus shipping]
Fret press insert 10 inch
Brass Fret Press inserts. 2,5 inch width. Radius: 10 inch .
€8,59
including VAT
19%
, [plus shipping]
Fret press insert 12 inch
Brass Fret Press inserts. 2,5 inch width. Radius: 12 inch .
€8,59
including VAT
19%
, [plus shipping]
Fret press insert 14 inch
Brass Fret Press inserts. 2,5 inch width. Radius: 14 inch .
€8,59
including VAT
19%
, [plus shipping]
Fret press insert 16 inch
Brass Fret Press inserts. 2,5 inch width. Radius: 16 inch .
€8,59
including VAT
19%
, [plus shipping]
Fret press insert 20 inch
Brass Fret Press inserts. 2,5 inch width. Radius: 20 inch .
€8,59
including VAT
19%
, [plus shipping]
Fret press insert 6 inch
Brass Fret Press inserts. 2,5 inch width. Radius: 6 inch .
€8,59
including VAT
19%
, [plus shipping]
Fret press insert 7,25 inch
Brass Fret Press inserts. 2,5 inch width. Radius: 7,25 inch .
€8,59
including VAT
19%
, [plus shipping]
Fret press insert 9,5 inch
Brass Fret Press inserts. 2,5 inch width. Radius: 9,5 inch .
€8,59
including VAT
19%
, [plus shipping]
Fret press insert flat
Brass Fret Press inserts. 2,5 inch width. Radius: Flat.
€8,59
including VAT
19%
, [plus shipping]
Fret Rocker
Fret rocker luthier tool. Four precision ground flat edges having lengths: 4.0 inch, 3.0 inch, 2.0 inch and 1.3 inch . Perfect for finding the source of fret buzz. Place the flat edge over three frets at a time and try to rock the tool. If the tool rocks, you've located the uneven fret.
€15,95
including VAT
19%
, [plus shipping]
Hosco Diamond Sheets
Diamond replacement sheets for Hosco nut work table.
€38,72
including VAT
19%
, [plus shipping]
Hosco Groobar
These Groobars are the perfect help to prevent filing the nut slot too deep. Four non-hardened steel bars in different thicknesses.
€31,24
including VAT
19%
, [plus shipping]
Hosco nut work table
nut work table, nut and saddle shaping tool, ultimate precision and speed for shaping
€183,00
including VAT
19%
, [plus shipping]
Hosco Padded Mat
guitar tech padded mat, with magnetised storing area for small parts
€38,64
including VAT
19%
, [plus shipping]
Hosco Scraper Set 2 pieces
Hosco set of two wide scrapers, size: 120 x 44mm, thickness: 0,40mm
€16,46
including VAT
19%
, [plus shipping]
Hosco Scraper Set 5 pieces
Set of 5 scrapers small scrapers, different shapes, commonly used in instrument manufacturing. Thicknesses: 0,2mm and 0,4 mm.
€30,04
including VAT
19%
, [plus shipping]
Hosco Straight Scraper
Hosco wide straight scraper, size: 150 x 55mm, thickness 1,0mm
€15,73
including VAT
19%
, [plus shipping]
Pasteur pipettes
Pasteur pipette, 1 ml, disposable. Package contains 50 pcs.
€7,49
including VAT
19%
, [plus shipping]
StewMac archtop bridge fitting jig
Archtop bridge fitting jig
€100,70
including VAT
19%
, [plus shipping]
StewMac neck shim 0.25
neck shim 0.25 degree shaped for electric bolt-on neck guitar
€15,20
including VAT
19%
, [plus shipping]
StewMac neck shim 0.50
neck shim 0.50 degree shaped for electric bolt-on neck guitar
€15,20
including VAT
19%
, [plus shipping]
StewMac neck shim 1.00
neck shim 1.00 degree shaped for electric bolt-on neck guitar
€15,20
including VAT
19%
, [plus shipping]
StewMac neck support caul
Excellent support for a guitar neck while pressing or hammering frets, or a lower clamping caul for regluing a fingerboard. You could even saw it into shorter lengths to make lower clamping cauls for glue-in fret jobs.
€29,99
including VAT
19%
, [plus shipping]
StewMac resin brace gluing wedge
resin brace gluing wedge
€22,24
including VAT
19%
, [plus shipping]
StewMac string spacing rule
Get accurate string spacing without calipers, calculators or shop rulers. This laser-etched stainless steel string spacing rule quickly finds the right spacing for just about any stringed instrument. It does all the math for you: proportional slot spacing automatically compensates for string diameters, from treble to bass, so the thicker strings won't feel crowded to the player.
€53,61
including VAT
19%
, [plus shipping]
