Luthier Tools

10 Piece Neck Shim set. Contents: 4x 0,2mm, 4x 0,5mm, 2x 1mm. Length: 5cm. Width: 1cm. Made of premium brass.

F.Dick Carver. ToolsSpecial carver. Especially suitable for separating top and back. For splitting bass beams and stock wood. With hand-friendly plastic coating. Blade length 270mm. BETTER THAN 1778: Friedr. Dick was founded in Esslingen am Neckar in 1778. More than 240 years later, the company is still family-owned. Long experience in file manufacturing, combined with modern and efficient workflows and high-performance partners, guarantees optimal, customer-focused service. With its extensive range of top-quality files, Friedr. Dick is the right partner for all applications in industry, crafts, and hobby.

F.Dick Splinter tweezers. ToolsHardened tips. Polished surface. Length 125mm. BETTER THAN 1778: Friedr. Dick was founded in Esslingen am Neckar in 1778. More than 240 years later, the company is still family-owned. Long experience in file manufacturing, combined with modern and efficient workflows and high-performance partners, guarantees optimal, customer-focused service. With its extensive range of top-quality files, Friedr. Dick is the right partner for all applications in industry, crafts, and hobby.

Convenient and practical. Made of aluminum alloy, heavy and durable. Radius adjustable via thumbwheel. Size: 21,6x8,5cm. Get a perfect bend on enough wire for a whole guitar in just seconds. Not for stainless steel frets.

Fret Cutter, used to trim the ends of new fret wire close to the fingerboard without leaving marks. Made in Japan. Dimensions: 190mm. 27mm jaw width.

Fret press caul. Perfect for converting your drill press or arbor press into a fret press. 3/8 inch (9,5mm) shank. Includes 2,5 mm hex key.

Brass Fret Press inserts. 2,5 inch width. Radius: 12 inch .

Brass Fret Press inserts. 2,5 inch width. Radius: 16 inch .

Brass Fret Press inserts. 2,5 inch width. Radius: 6 inch .

Brass Fret Press inserts. 2,5 inch width. Radius: 9,5 inch .

Fret rocker luthier tool. Four precision ground flat edges having lengths: 4.0 inch, 3.0 inch, 2.0 inch and 1.3 inch . Perfect for finding the source of fret buzz. Place the flat edge over three frets at a time and try to rock the tool. If the tool rocks, you've located the uneven fret.

GEWA Brass button puller. ToolsBrass. 7 x 7mm. With non-slip coating. For gentle removal of end knobs and secure holding during processing.

GEWA Bridge adjuster, cello. ToolsPlastic. With roller. For adjusting the bridge to the top curvature. Violin.

GEWA Carver with handle, 18mm. ToolsMade of high-quality special steel. dimensions = width.

GEWA Ceiling clamp, 35/125mm. ToolsModel Voigt. Round forged. Knurled screws. Movable pressure cap. Clamping range/throat.

GEWA Ceiling clamp, 40/225mm. ToolsModel Voigt. Round forged. Knurled screws. Movable pressure cap. Clamping range/throat.

GEWA Ceiling clamp, cello. ToolsFor holding the top below the fingerboard. Aluminum body. Glue-resistant jaws.

GEWA Cello gluing screw, 4/4. Tools6-piece.

GEWA Cello peg cutter. Tools2-piece. cutting length 80mm. cone 1: 25. weak, 10.7 x 7.5 / 11.5 x 8.3mm.

GEWA Cello peg cutter. Tools2-piece. cutting length 80mm. cone 1: 25. strong, 13.7 x 10.5 / 14.5 x 11.3mm.

GEWA Cello reamer. Tools3-edged. blade length 212.5mm. cone 1:17. ⌀. 15.0-27.5mm.

GEWA Cello/guitar bending iron, Bending sheet for cello and guitar. ToolsBending body and heating cartridge suitable for cello and guitar. Even small radii are possible. Up to rib height 160mm - 220 Volt.

GEWA Chip cutting tool. ToolsBrass body. Mittenwald model. 2 steel blades for digging trenches.

GEWA Combination sharpening stone, Grain size 1500/280. ToolsFor sharpening and honing. 210 x 75 x 20mm. Includes tray. Non-slip rubber feet.

GEWA Combination sharpening stone, Grain size 800/320. ToolsFor sharpening and honing. 210 x 75 x 20mm. Includes tray. Non-slip rubber feet.

GEWA Crack clamp, 17 x 40mm. ToolsBrass. Projection/Span.

GEWA Crack clamp. ToolsBrass. Double-sided. For violin and viola. Clamping width 280mm. 2 rotatable clamping jaws. 2 lengthwise and height-adjustable spacer screws each at the top and bottom.

GEWA Crack clamp, Cello up to 51cm. Tools3-armed. length adjustable. rotating clamping jaws. brass.

GEWA Crack clamp, Double bass, 6-piece. ToolsBrass flat profile. Rotatable, glue-repellent wooden jaws.

GEWA Crack clamp, Violin/Viola up to 25cm. Tools3-armed. length adjustable. rotating clamping jaws. brass.

GEWA Cutting tools. ToolsFor cutting lining strips, inlays, etc. wooden body made of hornbeam. measuring scale up to 60mm. working range 0-120mm.

GEWA Double bass bending iron, Bending sheet metal double bass. ToolsBending body and heating cartridge suitable for double bass and high sides. up to side height 240mm - 220 Volt.

GEWA Double bass reamer, Spiral reamer. Tools3-edged. blade length 221mm. cone 1:17. ⌀. 23.0-36.0mm.

GEWA Edge crack clamp. ToolsSpring guide. Swiss model. Horizontally and vertically adjustable. 4 screws. Opening: 16.5mm. Depth: 25mm. Span: 7mm.

GEWA F-hole clamp set. ToolsMetal. wooden jaws. strong spring. 44 pieces are sufficient for 1 frame wreath, body size 42 cm.

GEWA Feed clamp, 20/100mm. ToolsC-shape made of metal. 2 screws. Movable pressure caps with leather pad. Span/projection.

GEWA Feed clamp. Tools15 x 15mm. Brass. Movable pressure cap.

GEWA frame clamp, cello. ToolsFor gluing loose sides to the lower block when the instrument is closed. violin.

GEWA Glue screw cello and guitar. ToolsGuide spindle. thread in the handle.

GEWA grinding oil. ToolsThin mineral oil for oil stones (e.g. Arkansas). 100 cc.

GEWA Interior button, cello. ToolsFor measuring the length of the soundboard through the F-hole.

GEWA Parallel screw clamp, 40/70mm. ToolsBlued steel. double screws. span/throat.

GEWA Peg cutter violin/viola. Tools4-piece. cutting length 50mm. cone 1: 20. 7.2x4.7/8x5.55/8.7x6.2/9.5x7.0mm.

GEWA Planer set. ToolsArched sole. Brass wedge. Brass screw. Consists of:. Length 25mm, iron width 9mm. Length 30mm, iron width 10mm. Length 35mm, iron width 12mm. Length 47mm, iron width 18mm.

GEWA Quick knife, cello. ToolsStroke 30mm. With clock. For measuring the thickness of ceiling and floor.

GEWA Quick knife, violin. ToolsStroke 30mm. With clock. For measuring the thickness of ceiling and floor.

GEWA Repair clamp, 135/45mm. ToolsForged steel bracket. Movable pressure cap. Heavily threaded. Projection/span.

GEWA Repair clamp, 205/40mm. ToolsForged steel bracket. Movable pressure cap. Heavily threaded. Projection/span.

GEWA Repair clamp, 27/15mm. ToolsForged steel bracket. Movable pressure cap. Heavily threaded. Projection/span.