Goeldo

Chrome. Trem system for Fender Jazzmaster, Jaguar und similar guitars. With a push in arm.

Fits the Diego Deluxe SC Tremolos TVA1C/G and TVS1C/G.

The M4 studs are 25mm long and can be easily screwed into the top of the body or existing bushings using a 2mm hexagon wrench. Comes in a set of 2.

Gold. A classic Trem system, made exactly according to the original from the 50's. With a zinc block and pressed steel string saddles of historically accurate design. Sunk holes on top of base plate. Screwed tremolo arm and six attachment holes. All tremolos come complete with arm, springs, spring holder, screws and allen wrenches!

Chrome. Left Hand. A classic Trem system, made exactly according to the original from the 50's. With a zinc block and pressed steel string saddles of historically accurate design. Sunk holes on top of base plate. Screwed tremolo arm and six attachment holes. All tremolos come complete with arm, springs, spring holder, screws and allen wrenches!

Chrome / Antique. With aged bridge saddles! Looks much cooler! all original, steel tremolo block, pressed saddles. Purists love the sound of the steel block! Proove it with a magnet! Sunk holes on top of base plate! All tremolos come complete with arm, springs, spring holder, screws and allen wrenches!

Goeldo Vintage Bone Bridge Inlay. 90 x 7,5 x 2,2mm.

Goeldo Vintage Bone Bridge Inlay. 105 x 12 x 3,3mm.

Goeldo Vintage Bone Nut G style 53 x 10 x 6/4,5mm

Goeldo Vintage Bone Nut / Slide-Guitar Extension. 18,8 x 5 x 55mm.

Goeldo Vintage Bone Nut. Fstyle 48 x 7 x 3,3mm.

Washers for 'jacking up' a goeldo tremolo system. This may be necessary if the angle of the strings between the bridge and the tension roller of the tremolo is too large and the strings are therefore touching the rear edge of the bridge. As a result, the strings cannot move freely when the tremolo arm is actuated and instead get stuck. On guitars with a strongly arched top, it can happen that parts of the tremolo touch the top and damage the lacquer. This can also be prevented by using the goeldo washers.

For Bodies & necks. Bees wax with 20% addition of Carnauba wax! Hardens crystallic and gives a resistant and smooth wood surface. Great to apply after the use of our Oil & Wax Set. 100ml.

Ceramic based OX Pickup Magnet. A powerful magnet with transparent characteristics and powerful harmonics. Slightly smokey. Size: 50 x 6 x 3(N-S)mm.

Ceramic based OX Pickup Magnet. A powerful magnet with transparent characteristics and powerful harmonics. Slightly smokey. Size: 60 x 10(N-S) x 5mm.

Ceramic based OX Pickup Magnet. A powerful magnet with transparent characteristics and powerful harmonics. Slightly smokey. Size: 60 x 4,2(N-S) x 6mm.

Non-magnetized pole pieces for humbuckers. Gold. Size: 4,9 x 12,5mm. Package contains 12 pieces.

The angle of each of the 6 tailpiece "fingers" can be adjusted individually for optimal string pressure. Length 16.5cm. Gold.

Chrome. The big bridge with steel base plate and brass saddles, 4-string.

Rosewood. For Tunamatic bridges on Jazz guitars.

One set of replacement studs for the göldo LT1 (TLT1N) and LT2 (TLT2N), consisting of two pieces each with M8 and US inch thread. Matching hex keys and an 8mm open-end wrench for the tremolo arm nut included. Chrome.

One set of replacement studs for the göldo LT1 (TLT1N) and LT2 (TLT2N), consisting of two pieces each with M8 and US inch thread. Matching hex keys and an 8mm open-end wrench for the tremolo arm nut included. Nickel.

Hex into Hex' Tailpiece Lock Studs are the genius solution! They allow the tailpiece to be locked safely onto the unstringed guitar. Chrome.

Hex into Hex' Tailpiece Lock Studs are the genius solution! They allow the tailpiece to be locked safely onto the unstringed guitar. Nickel.

Tremolo studs, direct to wood. Set contains 2 studs.