Goeldo

Goeldo Vintage Bone Nut. Fstyle 48 x 7 x 3,3mm.

Washers for 'jacking up' a goeldo tremolo system. This may be necessary if the angle of the strings between the bridge and the tension roller of the tremolo is too large and the strings are therefore touching the rear edge of the bridge. As a result, the strings cannot move freely when the tremolo arm is actuated and instead get stuck. On guitars with a strongly arched top, it can happen that parts of the tremolo touch the top and damage the lacquer. This can also be prevented by using the goeldo washers.

For Bodies & necks. Bees wax with 20% addition of Carnauba wax! Hardens crystallic and gives a resistant and smooth wood surface. Great to apply after the use of our Oil & Wax Set. 100ml.

Ceramic based OX Pickup Magnet. A powerful magnet with transparent characteristics and powerful harmonics. Slightly smokey. Size: 50 x 6 x 3(N-S)mm.

Ceramic based OX Pickup Magnet. A powerful magnet with transparent characteristics and powerful harmonics. Slightly smokey. Size: 60 x 10(N-S) x 5mm.

Ceramic based OX Pickup Magnet. A powerful magnet with transparent characteristics and powerful harmonics. Slightly smokey. Size: 60 x 4,2(N-S) x 6mm.

Non-magnetized pole pieces for humbuckers. Gold. Size: 4,9 x 12,5mm. Package contains 12 pieces.

The angle of each of the 6 tailpiece "fingers" can be adjusted individually for optimal string pressure. Length 16.5cm. Gold.

Chrome. The big bridge with steel base plate and brass saddles, 4-string.

Rosewood. For Tunamatic bridges on Jazz guitars.

One set of replacement studs for the göldo LT1 (TLT1N) and LT2 (TLT2N), consisting of two pieces each with M8 and US inch thread. Matching hex keys and an 8mm open-end wrench for the tremolo arm nut included. Chrome.

One set of replacement studs for the göldo LT1 (TLT1N) and LT2 (TLT2N), consisting of two pieces each with M8 and US inch thread. Matching hex keys and an 8mm open-end wrench for the tremolo arm nut included. Nickel.

Hex into Hex' Tailpiece Lock Studs are the genius solution! They allow the tailpiece to be locked safely onto the unstringed guitar. Chrome.

Hex into Hex' Tailpiece Lock Studs are the genius solution! They allow the tailpiece to be locked safely onto the unstringed guitar. Nickel.

Tremolo studs, direct to wood. Set contains 2 studs.

1 pair, nickel. No more aching fingertips! Instead of turning the knurls just take a 2mm allen wrench from top. Bushing diameter 6mm, 11mm long.

A great set of different self adhesive Copper foils (sheet & stripes), some wire and solder to shield Pickguards, Pickups and electric cavities. Comes with instructions.

Gold. High-grade brass knob for potentimeters with 6mm shaft. Knurled side, with marker notch. M4 fastening screw. Diameter: 18mm. Height: 14,5mm.

Chrome. High-grade brass knob for potentimeters with 6mm shaft. Knurled side, with marker notch. M4 fastening screw. Diameter: 18mm. Height: 18,5mm.

Nickel. High-grade brass knob for potentimeters with 6mm shaft. Knurled side, with marker notch. M4 fastening screw. Diameter: 18mm. Height: 18,5mm.

Gold. High-grade brass knob for potentimeters with 6mm shaft. Knurled side, with marker notch. M4 fastening screw. Diameter: 22mm. Height: 15mm.

A robust socket with a small 15 mm outer diameter for more space in the socket bore. This means there is no contact between the moving parts and the cable. All soldering points have been moved to the rear end. Can be soldered stereo and mono. Insulation washers made of Pertinax, optimally platinized solder joints for perfect solder flow. Firm snap-in.

Flat mounting ring for pickups in Firebird or Mini Humbucker size.