Cioks

AC10 is a member of CIOKS professional range of dedicated multi-output power supplies for effect pedals. Its two powerful AC sections with 800mA each offer voltages 9, 12 and 16V AC. If you have one or two pedals in your setup, which requires an AC power source, AC10 is the right choice. It powers all vacuum tube pedals from Electro-Harmonix, Kingsley, older Blackstar HT series, the Whammy or JamMan from DigiTech, Tube Rotosphere, Tubeman, Tube Factor or Replex from Hughes & Kettner or EBS Valve Drive just to mention a few. If you only have one AC pedal, you can convert one of the AC sections into a powerful DC section offering 600mA with voltages 9, 12 and 15V DC. The first 4 isolated outlets offering a total of 600mA are ideal for pedals using 9 or 12V DC at lower currents op to 200mA.

Loads of power, almost endless compositions of different voltages and a great selection of included Flex cables make this power supply a really strong tool for powering big pedal boards with many different pedals. CIOKS CIOKOLATE power supply will power several high current digital pedals, high voltage 18, 24 or even 40V pedals, one or two AC pedals, one or two Radial Tonebone pedals or simulating a dying battery it will power your old favourite fuzz or overdrive. On top of that it will of course also power all your standard 9V pedals from its many isolated outlets.

DC8 is a professional medium sized dedicated multi-output power supply for effect pedals. It has 8 regulated and well filtered DC outlets configured in 6 isolated sections. With a total of 1.000mA it's a perfect solution for small or medium size rigs with pedals only using a DC power source. Its two powerful sections with 300mA each will power pedals like TC Electronic Novas, Eventide Factors, the digital BOSS or Electro-Harmonix pedals or others which draw a higher current than 100mA. The first 4 isolated outlets offering 4x100mA are ideal for 9 or 12V pedals needing less than 100mA. Combined with the included Stack Flex the DC8 will also power your 18 or 24V pedal.

Fuse for CIOKOLATE PSU, 5x20mm, slow blow T, 1.000mA. You might blow the fuse of your CIOKS power supply. Normally it only happens if the power supply's mains voltage selector switch is set to 115V and you connect it to 230 or 240V mains. In this case you'll need to replace the fuse. Please look at the bottom of your unit which type is the right one.

Fuse for DC10, AC10, TC10 or Pussy Power PSU, 5x20mm, slow blow T, 500mA. You might blow the fuse of your CIOKS power supply. Normally it only happens if the power supply's mains voltage selector switch is set to 115V and you connect it to 230 or 240V mains. In this case you'll need to replace the fuse. Please look at the bottom of your unit which type is the right one.

This adapter allows you to link two power supplies, where two or more power supplies are powered with a single mains power cord. You can use this adapter and feature with all three power supplies from the link range and also the new Power Factor 2.

Packed in a zip-bag this kit contains all the additional parts needed to mount a CIOKS 10 power supply underneath a Pedaltrain pedal board (PT-Jr, PT-1, PT-2, PT-3 or T-PRO).

As a co-branded product CIOKS has developed, manufactured and now released for sale the PowerFactor 2. It features a toroidal transformer, selectable 120 or 230V mains input voltage, 8 isolated outlets with a total output current of 2.200mA at voltages 9 or 12V DC, all with an individual advanced LED monitoring feature and short circuit protection.

This very simple Flex cable is just an extension providing an extra 50cm length to any other Flex cable.

Cioks Flex Adaptor Cable.
Length: 15cm. Plug type: 5,5/2,1mm angled plug. Tip Negative.

Cioks Flex Adaptor Cable.
Length: 50cm. Plug type: 5,5/2,1mm angled plug. Tip Negative.

Cioks Flex Adaptor Cable.
Length: 80cm. Plug type: 5,5/2,1mm angled plug. Tip Negative.

Cioks Flex Adaptor Cable.
Length: 30cm. Plug type: 5,5/2,1mm angled plug. Tip Positive.

By using two isolated outlets the Series adapter Flex gives you the sum of voltages of the two outlets used. This adapter Flex cable should be used in combination with any of CIOKS standard Flex cables if you want to power an 18V, 24V or even a 40V pedal. It gives you not only the higher voltage but also the possibility to choose the type of plug at the pedal end plus the length you need. The plug type and length is determined by the standard Flex cable used with the adapter Flex. If you’re looking for a simpler way to power an 18V pedal with a standard 5,5/2,1mm centre negative DC plug (BOSS standard) please have a look at CIOKS Stack Flex.

Cioks Flex Adaptor Cable.
Length: 30cm. Plug type: 5,5/2,5mm angled plug. Tip Positive.

Cioks Flex Adaptor Cable.
Length: 30cm. Plug type: 3,5mm mini plug angled. Tip Positive.

Cioks Flex Adaptor Cable.
Length: 50cm. Plug type: 3,5mm mini plug straight. Tip Positive.

Cioks Flex Adaptor Cable.
Length: 50cm. Plug type: 9V Battery clip connector.

By using two isolated outlets this parallel adapter Flex gives you the sum of max. currents of the two isolated outlets used. This adapter cable should be used in combination with any of CIOKS standard Flex cables if you need to power pedals with higher current needs. It gives you not only the higher current but also the possibility to choose the type of plug at the pedal end plus the length you need. The plug type and length is determined by the standard Flex cable used with the adapter Flex.