TAD

TAD 8AB2A1B reverb tank. 3 Springs, medium decay (typically used for Boogie and Fender). Length: 23,5cm, 10 Ohm / 0,8 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

This is a remake of the legendary British KT66 that made Marshall's amps famous in the 1960s. May replace 6L6GC and 5881 tubes.

Matched Duet. In terms of sound, the TAD 6L6GCM-STR REDBASE produces the powerful but always defined bass response known from the legendary american built NOS RCA 6L6GC, with clear, unobtrusive and yet transparent highs. In every setting, the TAD 6L6GCM-STR REDBASE responds directly and with noticeable dynamics, from buttery soft and warm to powerful and brutal without losing any details or depth.

TAD Vintage Oil capacitor. Aluminum foil plates, oil dielectric. Smooth, natural sounding audio signal capacitor. Superb performance in guitar tone control circuits, tube guitar amplifiers, tube hifi amplifiers and tube studio equipment. Hermetically sealed aluminum tube casing with outer insulation jacket.
Rated voltage: 600VDC. Size (LxD): 22x11mm.

Asymmetric double triode.

TAD 8BB3C1B reverb tank. 3 Springs, long decay (typically used for Rivera and Brunetti). Length: 23,5cm, 190 Ohm / 26 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

Wonderfully powerful EL34 with a great British Rock'n'Roll tone.

TAD 8DB2C1B reverb tank. 3 Springs, medium decay (typically used for Marshall). Length: 23,5cm, 310 Ohm / 36 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

Ultra high power tube! Makes every amp sound punchier, more voluminous and more powerful. Single tube.

The TAD 6V6GT-STR Redbase is a heavy duty 6V6GT tube that is capable of handling a higher plate current. It is a prime choice for the NOS-like 'sweet top end' tone, while surprising with a tight bass response and a very powerful sound. It is an ideal match for Class A amps like the Fender Tweed Champ, Champion 600 or the Vibro-Champ. Furthermore it excels as reverb driver tube in Fender Vibroking amps and Dual Professionals. Recommended for Deluxe Reverb amps, providing sweet tone with silky heighs.

TAD 9EB2C1B reverb tank. 3 Springs, medium decay (typically used for Peavey). Length: 42,5cm, 3 x 2 springs, 800 Ohm / 56 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

Direct replacement Power Transformer. Application: Fender Tweed Deluxe Amp (5E3 etc.). New Version: 2 inch stack and C.T. on filament for low noise. Supports 6L6GC and GZ34/5AR4 tubes too!

Direct replacement Power Transformer. Application: Fender Bronco, Champ , Vibro-Champ (alle AA764 Modelle), Princeton Reverb. Made in USA.

TAD GZ34/5AR4-CZ PREMIUM SELECTED.

TAD 8AB2D1A reverb tank. 3 Springs, medium decay (typically used for Roland JC120 (old), Roland RE501). Length: 23,5cm, 10 Ohm / 0,8 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

TAD 9GB2C1B reverb tank. 3 Springs, medium decay (typically used for Carvin). Length: 42,5cm, 3 x 2 springs, 8333 Ohm / 735 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

TAD 9AB2C1B reverb tank. 3 Springs, medium decay (typically used for Fender upgrade for deeper reverb). Length: 42,5cm, 3 x 2 springs, 10 Ohm / 0,8 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

Direct replacement Power Transformer. Paper Stick Wound. Application: Fender Deluxe Reverb.

Generic direct replacement choke for Marshall 50V / 100W (years 1970 to 1989 and Reissue).

This is a redesign, styled after the early British MOV KT88 tubes. It has the same large heavy glass envelope and a polished metal base. Excellent tone and great appearance. A preferred choice for high-end audio and powerful bass amps.

In the tradition of the legendary Telefunken EL34, the TAD EL34-STR REDBASE provides a gorgeous, dynamic and amazingly open in-yer-face tone with just the right amount of angriness. Expect a clear, harmonic and open top end, a lovely spot-on midrange, with vocal low-mids and a great bass response as you would expect it from a TAD EL34. Extra rugged glass envelope, golden control grid wire, two especially large cooling grids and special high-precision construction with smallest tolerances guarantee for maximum stability and reliability.

Direct replacement Output Transformer, 25W. Impedance: 8 Ohm. Tubes: 2 x 6V6GT. Application: Fender Deluxe Reverb, Princeton Reverb.

Direct replacement Power Transformer. Application: Fender Tweed Champ 5E1, 5F1,

Output Transformer for 4x EL34 to 4, 8, 16 Ohms, suitable for all 100W models from 1966 on. JMP 100W models, JCM800 (2203, 2210, 1959) and 6100 Heads. Modeled after an original Transformer from a 68 Super Lead.

TAD 4FB3D1B reverb tank. 2 Springs, long decay (typically used for Music Man). Length: 42,5cm. 2 x 2 springs. 1475 Ohm / 200 Ohm (input impedance / DC). 2250 Ohm / 200 Ohm (output impedance / DC).

This is a popular 5881 made in Russia. Modern, aggressive character, very dependable with slightly less power than most 6L6GC tubes.

Good Gain - Airy Top End - Fat Mid-range. Selected for low noise and balanced systems is this tube recommended for guitar and audio amplifers to improve overall response. Best for clean tones as well as for sounds requiring fat midrange, detailed airy top end and lots of power from the preamp.

TAD 8BB2C1A reverb tank. 3 Springs, medium decay (typically used for Kitty Hawk Supreme, Rivera). Length: 23,5cm, 190 Ohm / 26 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

Dimensions (D x L): 30 x 50 mm. The TAD GoldCap is a radial, can type electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind. Voltage: 500V. Temperature: 85 degrees Celsius.

Direct replacement Power Transformer. Application: Fender Twin Reverb 100W, Bassman 100, Jim Kelly, Mesa Boogie MK 1 - 3.

TAD 4DB3C1B reverb tank. 2 Springs, long decay (typically used for Marshall). Length: 42,5cm. 2 x 2 springs. 250 Ohm / 31 Ohm (input impedance / DC). 2250 Ohm / 200 Ohm (output impedance / DC).

This is a heavy duty remake of the classic 6550A tube with a heavy straight glass envelope and polished middle base. Popular choice for bass guitar amps and high end HiFi applications. The TAD 6550A-STR REDBASE provides depth, power and details in perfect quality.

Wonderfully powerful EL34 with a great British Rock'n'Roll tone.

This is a reproduction of the clear top tube with TAD's black plate anode system. Rich, natural tone, smooth top end, tight bass and complex midrange. Rugged internal construction surrounded by extra heavy glass. This is a prime choice for Fender, Boogie or Engl amps.

7189A TAD Selected

Direct replacement Output Transformer, 45W. Impedance: 8, 16 Ohm. Tubes: 2 x KT66. Application: Marshall JTM45 with 100V Output.

Direct replacement Output Transformer, 15W. Impedance: 8 Ohm. Tubes: 2 x EL84. Application: Laney LC15, LC15R.

Direct replacement Output Transformer, 100W. Impedance: 4, 8 Ohm. Tubes: 4 x 6L6GC. Application: Fender Twin Reverb, Showman Reverb.

This is a remake of the legendary British KT66 that made Marshall's amps famous in the 1960s. May replace 6L6GC and 5881 tubes.

This very heavy duty version of the 7027A is perfect for Ampegs and many HiFi amps.

Premium Amp Cover for Marshall Large Head (100W / Large 50W)

Direct replacement Output Transformer, 100W. Impedance: 4, 8, 16 Ohm. Tubes: 4 x EL34. Application: Hiwatt Custom 100, TG5479, with 100V Output.

Direct replacement Power Transformer. Application: Fender Vibrolux, Vibrolux Reverb, Tremolux.

Thick glass and heavy duty construction can be found on this tube. Gold grid wire limits stray characteristics and improves overall reliability. Highest grade audiophile quality sound and construction.

This is a heavy duty remake of the classic 6550A tube with a heavy straight glass envelope and polished middle base. Popular choice for bass guitar amps and high end HiFi applications. The TAD 6550A-STR REDBASE provides depth, power and details in perfect quality.

Marshall Large Head Backpanel with gold mesh. Size: 70,8 x 24,1cm. Chassis cutout: 62,8 cm.

The TAD ECC81 / 12AT7-Cz is selected with regards to a tight balance of both triodes making it ideal for the use as BALANCED PHASE DRIVER. In addition to the perfect symmetrical systems, the strong amplification characteristics of the TAD ECC81 / 12AT7-Cz support increased dynamics of the output stage when used as phase driver or phase inverter tube.

Premium Amp Cover for Marshall Small Head 18/20W (2061X)

Testing tool with backlighted display and four noval measurement adaptors. Measures the bias current of any EL84, etc.