Home > Search results

Search results

26 results found. Show results 1 - 26

Products

Electric Druid Tap LFO
The Elec Druid TAPLFO 2D chip generates a number of PWM LFO waveforms that can be used in stompboxes and synth applications. DIP14.
€5,06
including VAT 19% , [plus shipping]
Qty
Electric Druid DIGIDELAY board
The Electric Druid DIGIDELAY PCB Board is for the Electric Druid DigiDelay 4 second digital delay project. This PCB is designed to fit into a Hammond 1490BB enclosure in landscape format, and can be used with PCB mounting pots for a simple, reliable construction.
€13,09
including VAT 19% , [plus shipping]
Qty
Electric Druid Flangelicious board
The Electric Druid Flangelicious PCB Board is for the Electric Druid Flangelicious flanger project. This PCB is designed to fit into a Hammond 1490BB enclosure in landscape format, and can be used with PCB mounting pots for a simple, reliable construction.
€14,28
including VAT 19% , [plus shipping]
Qty
Electric Druid VCLFO 10
The Electric Druid VCLFO 10 is a simple-to-use 0-5V voltage-controlled LFO chip with many more features than your average LFO. For a start, it can produce 16 different waveforms, in two banks of eight, including a wandering random wave and a noise source. Waveforms can be further shaped by the Wave Distort feature.
€6,25
including VAT 19% , [plus shipping]
Qty
Electric Druid Tap LFO
The Elec Druid TAPLFO 3 chip generates two sets of 8 waveforms for 16 separate waveforms in total that can be used in stompboxes and synth applications. It offers CV invert configuration input to make life simpler with CV mixers and a smoothing filter to reduce clicks from sharp waveform edges. Unipolar or Bipolar output selection. DIP14.
€7,14
including VAT 19% , [plus shipping]
Qty
Electric Druid Stomp LFO
The Elec Druid STOMPLFO 8-pin tap tempo LFO is perfect for smaller environments like pedals. It can replace the typical dual op-amp Schmitt trigger/integrator LFO design. It uses Pulse Density Modulation (PDM) instead of Pulse Width Modulation (PWM) for the output. This enables the output frequency to be much higher (2MHz instead of 10's of KHz) and that means simple RC filters can smooth the output easily without losing any waveform detail. DIP8.
€5,95
including VAT 19% , [plus shipping]
Qty
Electric Druid PENTANOISE Noise Generator
The Electric Druid PENTANOISE is a five channel digital noise source that produces independent pure white noise over the whole audio band. With only two resistors and two capacitors on each output, you can build five independent channels of analog white noise. DIP8.
€5,65
including VAT 19% , [plus shipping]
Qty
Electric Druid VCDO Wavetable oscillator
The Electric Druid VCDO Wavetable oscillator is a powerful voltage-controlled 8-bit wavetable oscillator. It includes a sub-oscillator, a glide feature and separate modulation inputs for frequency and waveform modulation.
€10,71
including VAT 19% , [plus shipping]
Qty
Electric Druid EnvGen 8
The Electric Druid ENVGEN 8 Envelope Generator removes the need for a crystal and resconstruction filter. It has an output sample rate of 31.25KHz, improving the envelope table resolution, and uses a multiplying DAC for the output, which allows full analog Level CV control without any lose of resolution or calculation errors.
€7,14
including VAT 19% , [plus shipping]
Qty
Electric Druid TapLFO 2D SOIC
The Elec Druid TAP LFO 2D (SOIC) chip generates a number of PWM LFO waveforms that can be used in stompboxes and synth applications. SOIC.
€7,44
including VAT 19% , [plus shipping]
Qty
Electric Druid DIGIDELAY Delay processor chip
The Electric Druid DIGIDELAY Delay processor chip is a 16-bit, 32-KHz delay processor. With the addition of a couple of SRAM chips, it can provide up to 4 seconds of delay. It allows controlling the Delay Time, Repeats, and Delay Level, plus high pass and lowpass shelving tone filters for the delayed signal. The chip uses onboard ADC/DAC, so there
€25,64
including VAT 19% , [plus shipping]
Qty
Electric Druid DIGIDELAY board and chipset
The Electric Druid DIGIDELAY PCB Board set is for the Electric Druid DigiDelay 4 second digital delay project. It includes one PCB, one DIGIDELAY delay processor chip and two 128kB SRAMs. The PCB is designed to fit into a Hammond 1490BB enclosure in landscape format, and can be used with PCB mounting pots for a simple, reliable construction.
€41,65
including VAT 19% , [plus shipping]
Qty
Electric Druid MIDI In/Out/Thru PCB
The Electric Druid MIDI In/Out/Thru PCB is a useful little board to provide the three standard MIDI sockets in your synth. It can be used with your PIC, AVR or Arduino projects. The board can be populated with different component values for either +5V or +3.3V operation.
€17,85
including VAT 19% , [plus shipping]
Qty
Electric Druid LOOPENV 1B Envelope Generator
The Electric Druid LOOPENV 1B Envelope Generator chip. MODE CV input allows selection of normal ADSR, Gated looping, or full LFO-style Looping modes. DIP14.
€6,25
including VAT 19% , [plus shipping]
Qty
Electric Druid MULTIFLANGE flanger delay clock
The Electric Druid MULTIFLANGE flanger delay clock includes an LFO with seven waveforms, including a manual mode for fixed flanger (matrix) filtering effects. LFO Rate, Waveform, and Depth are all variable using 0-5V control voltages. The chip outputs a biphase clock from 25KHz to 500KHz that can drive MN32xx-series delay lines directly. DIP8.
€6,25
including VAT 19% , [plus shipping]
Qty
Electric Druid NOISE 1B Noise Generator
The Electric Druid NOISE 1B Noise Generator is a simple digital noise source that produces pure white noise over the whole audio band
€5,36
including VAT 19% , [plus shipping]
Qty
Electric Druid VCADSR Envelope Generator 7B
The Electric Druid VCADSR 7B is a fully voltage-controlled ADSR envelope generator chip. In addition to 0-5V CV control of Attack, Decay, Sustain, and Release, it also includes CV control of output level and includes an overall Time CV for modulation of the envelope time.
€7,14
including VAT 19% , [plus shipping]
Qty
Electric Druid 4-KNOB FLANGE flanger delay clock
The Electric Druid 4-KNOB FLANGE is a flanger delay clock chip that makes building a sophisticated, versatile flanger easy. It can replace the MN3102 clock chip and the associated LFO in many modulation effects, whilst providing many new features. LFO Rate, LFO Depth and Manual flanger frequency are all variable using 0-5V control voltages. DIP8.
€7,14
including VAT 19% , [plus shipping]
Qty
Electric Druid DIGIDELAY SRAM 128kB, 2 pieces
A pair of SRAM chips for use in the 4 second Digital Delay project. The 23LC1024-I/P is a 128KByte RAM chip with an SPI serial interface. Two of these chips are used in the DigiDelay project to produce up to 4 seconds of delay with 16-bit data and a 32KHz sample rate.
€7,44
including VAT 19% , [plus shipping]
Qty
AS3310
The AS3310 is a high performance voltage-controlled analog ADSR envelope generator that is pin-for-pin compatible with the CEM3310.
€7,14
including VAT 19% , [plus shipping]
Qty
AS3320
The AS3320 is a high performance voltage-controlled four-pole filter modelled after the CEM3320, with on-chip voltage-controllable resonance. The chip can be configured as an lowpass, highpass, bandpass, or all pass filter. It has an exponential (V/Oct) frequency control input which can cover more than ten octaves with little control voltage feedthrough.
€7,14
including VAT 19% , [plus shipping]
Qty
AS3330
The AS3330 is a dual general purpose voltage controlled amplifier. The chip is Alfa's modern pin-for-pin compatible clone of the CEM3330 dual voltage-controlled amplifier. It can also be used to build voltage-controlled filters and waveform generators.
€7,74
including VAT 19% , [plus shipping]
Qty
AS3340
The AS3340 chip is Alfa's modern equivalent of the famous CEM3340 voltage-controlled oscillator. It provides Ramp, Pulse/Square, and Triangle outputs, has inputs for oscillator sync, is temperature compensated and stable, and provides excellent 1V/Oct tracking. In short, it's everything you need from an analog oscillator, on a chip. There hasn't been a better design than the 3340.
€7,74
including VAT 19% , [plus shipping]
Qty
AS3345
AS3345 oscillator
€7,74
including VAT 19% , [plus shipping]
Qty
AS3360
The AS3360 is a dual general purpose voltage controlled amplifier. The chip is Alfa's modern pin-for-pin compatible clone of the CEM3360 dual voltage-controlled amplifier. It can also be used to build voltage-controlled filters and waveform generators.
€7,14
including VAT 19% , [plus shipping]
Qty
CEM3340
This is the re-release version of the famous CEM3340 voltage-controlled oscillator. It provides Ramp, Pulse/Square, and Triangle outputs,has inputs for oscillator sync, is temperature compensated and stable, and provides excellent 1V/Oct tracking. In short, it's everything you need from an analog oscillator, on a chip. There hasn't been a better design than the 3340.
€38,08
including VAT 19% , [plus shipping]
Qty
 
The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.