Tube Retainers, Clips and Shields

Tube retainer, made by Belton. Fits EL34 and similar. Steel plate with Ni plating and natural coil spring.

Tube shield, silver. Made by Belton. Can height: 50mm. Spring length: 20mm. Materials: Aluminum sleeve with natural coil spring.

Tube shield, silver. Made by Belton. Can height: 40mm. Spring length: 26mm. Materials: Aluminum sleeve with natural coil spring.

Tube Vibration Dampening Ring 28mm. For 6V6, 6SN7, 6SL7, GZ34, etc. Made of high temperature silicone that can withstand up to 240°.C.

Tube Vibration Dampening Ring 40mm. For KT88, 6550, KT66, KT100, 2A3, 300B, etc. Made of high temperature silicone that can withstand up to 240°.C.

Gold tube cage for 12AX7 and other tubes of same size. The cage has three screws included on the side to mount it to the chassis.

for 9-pin noval sockets

for 9-pin noval sockets

Silver tube cage for 12AX7 and other tubes of same size. The cage has three screws included on the side to mount it to the chassis.

Steel plate for covering unused socket holes on modified chassis. These covers provide a safe solution for modifying any chassis. These covers use elongated mounting holes to fit a variety of socket hole sizes. 8-pin (octal) socket cover. 6,5x3,5mm mounting holes. 40mm center to center.

Steel Spring Steel tube clip. Can also be used for capacitors. Diameter: 0,5 inch (12,5mm).

Steel Spring Steel tube clip. Can also be used for capacitors. Diameter: 1 inch (25mm).

Steel Spring Steel tube clip. Can also be used for capacitors. Diameter: 1,25 inch (31,75mm). Fits most 6L6GC tubes, etc.

Tube clip retainer for octal tubes. Hole spacing (center-to-center): 39mm.

Tube Retainer for KT88, 6550 and similar.

Tube Retainer, short length (40mm).

For EL84, 7189, 12BH7, ECL-86, ECL-82 and similar.

Spring tube retainer for KT88, 6550 and similar. The retainer has a silicon damper for better protection from vibration.

Aluminum tube ring. Anodized black. Outside diameter: 34mm, Inside diameter: 23mm. Height: 6mm . Mounting hole distance: 28mm. Installs using two M3 screws.

Aluminum tube ring. Anodized silver. Outside diameter: 34mm, Inside diameter: 23mm. Height: 6mm . Mounting hole distance: 28mm. Installs using two M3 screws.

Tube shield for 9-pin noval sockets. Silver color. Heightof cap: 49mm. Total height: 52mm.

Tube shield for 9-pin noval sockets. Silver color. Total height: 49mm.

Tube Vibration Dampening Ring for noval tubes. Wraps around the pins of the tube and is sandwiched between the socket and the tube. This is the spot where most of the vibrational noise is generated, so these rings actually work much more effectively than the other dampening rings you may already know which wrap around the body of the tube.

This ring fits into tube retainers and dampens vibrations, thus reducing microphonics and increasing tube life. It fits all EL34 / 6L6 / 5881 tube retainers.