PC Boards

Size: 94 x 182 mm. The multiboard allows quick and easy construction using individual parts and prototypes. The soldered side is divided into many copper areas. Each area is measuring approx. 10 * 10 mm. The components are attached directly onto the solder side and the connection wires are soldered to the copper surface.

Prototyping circuit board that has a general purpose pad-per-hole pattern making it great for general purpose analog and digital use. It is a double-sided board with plated holes, which allows components to be easily soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board.

Turret strip with 23 turrets. Size: 241 x 16mm.

Turret strip with 11 turrets. Size: 127 x 16mm.

Turret strip with 6 turrets. Size: 67 x 16mm.

Blank board, red color. Size: 258x67mm. Thickness: 2mm. 189 holes.

Blank board, black color. Size: 258x67mm. Thickness: 3mm. 189 holes.

Fiber board, vulcanized. Size: 380 x 76mm. Thickness: 1,5mm.

Pertinax tag board. Thickness: 1,5mm. Size: 40x9mm length. 1 row with 5 silver plated contacts. Contact distance 6mm.

Pertinax tag board. Thickness: 1,5mm. Size: 80x38mm length. 2 rows with 10 silver plated contacts each. Contact distance 8mm.

Hardpaper tag board. Size: 120x12mm length. 10 contacts. Contact distance 10mm.

Epoxy FR4 board. Length: 300mm. Width: 150mm. Thickness: 2mm.
Yellow color.

Epoxy turret board. Length: 300mm. Width: 60mm. Thickness: 2mm.
6 Rows of holes with 30 holes each. Hole diameter: 2,5mm. Distance between holes: 10mm.

Epoxy FR4 board. Length: 300mm. Width: 150mm. Thickness: 3mm.
Blue color.

Hardpaper (class IV) board, thickness 1,5mm, 50cm length, silver plated brass contacts. Made in Germany by Rademacher.

Epoxy, thickness 1,5mm

General purpose board, thickness 1,5mm. Hole spacing 2,54mm, hole size 1,0mm. Pad-per-hole pattern. Four mounting holes. Size: Pre-cut to fit a 1590BB enclosure.

Hole board with no copper pads, thickness 1,5mm. Hole spacing 2,54mm, hole size 1,0mm, 39 rows of holes.
Size: 100x100mm.

Hardpaper board (FR2) with photoactive copper plating (35um). Board thickness 1,5mm.
Size: 160x100mm.

Hardpaper board (FR2) with photoactive copper plating (35um). Board thickness 1,5mm.
Size: 50x100mm.

Epoxy board with photoactive copper plating (35um).
Size: 200x150mm.

Epoxy board with photoactive copper plating (35um). Board thickness 1,5mm.
Size: 75x100mm.

Epoxy board with double sided copper plating (35um).
Size: 160x100mm.
Can be used with Positive spray (SKU20765) to manufacture circuit boards.

Epoxy board with copper plating (35um). Board thickness 1,5mm.
Size: 200x160mm.

Epoxy board with copper plating (35um). Board thickness 1,5mm.
Size: 160x100mm.
Can be used with Positive spray (SKU20765) to manufacture circuit boards.

High quality board made by Bungard. Epoxy board (FR4 basis material, fibre reinforced with UV blocker. Photoactive copper plating (35um). Board thickness 1,5mm.
Size: 160x100mm.

Stripboard with strips every 5,08mm. Board thickness 1,5mm. Hole spacing 2,54mm, hole size 1,0mm. 20 rows of holes with copper, 19 rows of holes without copper.
Size: 160x100mm.

Strips of three connected holes. Board thickness 1,5mm. Hole spacing 2,54mm. Width 100mm. Length: 160mm.

Stripboard, thickness 1,5mm. Hole spacing 2,54mm, hole size 1,0mm
Size: 500x100mm.

Stripboard, thickness 1,5mm. Hole spacing 2,54mm, hole size 1,0mm, 39 rows of holes.
Size: 160x100mm.

Stripboard, thickness 1,5mm. Hole spacing 2,54mm, hole size 1,0mm, 39 rows of holes.
Size: 75x100mm.

Pad-per-hole board, thickness 1,5mm. Hole spacing 2,54mm, hole size 1,0mm, 39 rows of holes. Size: 500x100mm.

Pad-per-hole board, thickness 1,5mm. Hole spacing 2,54mm, hole size 1,0mm, 39 rows of holes.
Size: 160x100mm.

Pad-per-hole board, thickness 1,5mm. Hole spacing 2,54mm, hole size 1,0mm, 39 rows of holes.
Size: 100x100mm.

Pad-per-hole board, thickness 1,5mm. Hole spacing 2,54mm, hole size 1,0mm, 39 rows of holes.
Size: 50x100mm.

This natural color PCB is a recreation of the iss. 1 circuit board found in classic Fuzz Face pedals. When drawing the layout, multiple originals were closely referenced to ensure a proper match and fit. The copper traces are gold plated providing protection from corrosion indefinitely. This classic board fits the mounting holes on both original and reproduction Fuzz Face enclosures.

Iss. 2 fuzz PCB made with a phenolic substrate for an even closer match to the vintage production boards. This PCB is a recreation of the iss. 2 circuit board found in classic Fuzz Face pedals.

FZ-1 fuzz circuit board made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This board is a recreation of the circuit board found in Maestro FZ-1 pedals. The board is styled after the original version that can also be found in early serial Maestro FZ-1A pedals.

This board is a recreation of the circuit board found in the Shatterbox pedal. The board is styled after the later version with a printed circuit rather than a stripboard construction. This is the same board that was used in the 'split board' version which can be built by cutting the board down the middle to separate the fuzz section from the treble booster section.

Natural Stripboard featuring a 0.15 inch (0,381 mm) vintage spacing. This spacing is great for vintage-style builds and more easily accommodates axial capacitors and other larger sized vintage parts like resistors and transistors. The board has a 20x10 grid (10 strips) and easily fits into 1590BB style enclosures and larger vintage-style fuzz enclosures,

MKIII & MKIV fuzz circuit board made with a phenolic substrate for an even closer match to the vintage production boards. This board is a recreation of the circuit board found in Vox Tone Bender MKIII pedals. The board is styled after the non-reverse version that can also be found in the Park Fuzz Sound, Rotosound Fuzz, and the MKIV Tone Bender.

This board is a recreation of the circuit board found in the Zonk II pedal. The board is styled after the version that featured silicon transistors and a printed circuit rather than a stripboard construction. It is actually a cut down version of the Shatterbox PCB using only the fuzz side of that pedal.