Dress Nut FS-1532-White
Carling dress nut for footswitches. White. These dress nuts are made of durable plastic and feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is not capped so they can thread past the top of the bushing. These fit any 15/32-32UNS bushing but can also work with M12 bushings.
€1,25
including VAT
19%
, [plus shipping]
Hex Nut M10x0,75
Hex Nut M10x0,75. High type. Made of zinc plated steel. M 10x0,75.
€0,63
including VAT
19%
, [plus shipping]
Screw M6 x 10mm Chrome
Cheese head screw, stainless steel. M6 x 10mm. Used for example on the Mundorf Mlytic caps.
€0,33
including VAT
19%
, [plus shipping]
Screw M6 x 20mm Chrome
Cheese head screw, stainless steel, chrome plated. M6 x 20mm.
€0,33
including VAT
19%
, [plus shipping]
Swivel Nut M7 Chrome
Spare part, swivel nut M7 with grip axle, chrome also for microphone stands
€4,69
including VAT
19%
, [plus shipping]
Washer 12mm steel, XXL Black
Oversized M12 flat washers, Black. These washers fit both metric (M12) and imperial (15/32) bushings for compatibility with the vast majority of foot switches and full-sized toggle switches. These oversized washers are a great way to add a distinctive look to projects.
€1,55
including VAT
19%
, [plus shipping]
Dress Nut SC-DRESS-LARGE
Switchcraft shouldered hex nuts for 3/8 inch -32 UNEF-2A threaded bushings. These nuts include a rubber grommet for use in sealed systems and also add a unique look to any build such as pedals or amplifiers. This nut is intended for panel or chassis thicknesses of 1,27 - 2,3mm. (0.05 - 0.09 inch).
€3,69
including VAT
19%
, [plus shipping]
Dress Nut FS-1532-Red
Carling dress nut for footswitches. Red. These dress nuts are made of durable plastic and feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is not capped so they can thread past the top of the bushing. These fit any 15/32-32UNS bushing but can also work with M12 bushings.
€1,25
including VAT
19%
, [plus shipping]
Dress Nut SC-DRESS-SMALL
Switchcraft shouldered hex nuts for 3/8 inch -32 UNEF-2A threaded bushings. These nuts include a rubber grommet for use in sealed systems and also add a unique look to any build such as pedals or amplifiers. This nut is intended for panel or chassis thicknesses of 2,4 - 3,2mm. (0.095 - 0.125 inch).
€3,99
including VAT
19%
, [plus shipping]
Dress Nut 3/8 inch slotted
Slotted dress nut for3/8 inch-32 threaded bushing such as standard Switchcraft 1/4 inch jacks and CTS potentiometers. These plated brass nuts add a sleek look to any amplifier, pedal or guitar. This style of nut has a similar look to slotted round nuts found on plexi Marshall amps.
€3,87
including VAT
19%
, [plus shipping]
Washer 12mm Black
Black Nylon flat washer for use with foot switches. This washer is M12 size and fits both metric (M12) and imperial (15/32) bushings for compatibility with the vast majority of foot switches.
€0,60
including VAT
19%
, [plus shipping]
Headless screw M3, 6mm
Headless screw M3, length 6mm. Polyamid 6.6 natural color.
€0,46
including VAT
19%
, [plus shipping]
QPX-Aged Indicator Set LP-IND
Aged indicator washer set. 8mm diameter. Set contains 4 pieces.
€6,66
including VAT
19%
, [plus shipping]
Solder Lug Locking Washer 3/8 inch
Angled solder terminal on a locking washing for 3/8 inch bushings. Perfect for adding chassis ground connections on switches, jacks, pots, and any other 3/8 inch bushing part. Pack contains 10 pieces.
€2,98
including VAT
19%
, [plus shipping]
Fender lockwashers 12pcs
Original Fender lock washers for Fender potentiometers. Package of 12.
€6,26
including VAT
19%
, [plus shipping]
Befaco Bananut Purple
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Purple.
€0,86
including VAT
19%
, [plus shipping]
Solder Lug lockwasher 3/8 inch hole
Angled solder terminal on a locking washing for 3/8 inch bushings. Perfect for adding chassis ground connections on switches, jacks, pots, and any other 3/8 inch bushing part like CTS pots. Package contains 10 pieces.
€2,98
including VAT
19%
, [plus shipping]
Washers M3 Flat White
High quality nylon M3 flat washers. Set contains 10 pieces. These durable washers fit perfectly on M3 threaded screws. The small outside diameter provides a clean look beneath the head of the screw.
Nut 3-8-POT-Black
3/8 inch hex nut, black. Commonly used with inch threaded potentiometers.
€0,60
including VAT
19%
, [plus shipping]
Screw M6 x 10mm Natural
Cheese head screw, stainless steel. M6 x 10mm. Used for example on the Mundorf Mlytic caps.
€0,30
including VAT
19%
, [plus shipping]
Lockwasher 8,4mm 100 pieces
Lockwasher, made of tin plated steel. Inner diameter: 8,4mm. Outer diameter: 15mm. Package contains 100 pieces.
€4,11
including VAT
19%
, [plus shipping]
Finishing Nut 3/8 inch Nickel
Nickel. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.
€1,25
including VAT
19%
, [plus shipping]
Befaco Bananut Orange
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Orange.
€0,86
including VAT
19%
, [plus shipping]
Finishing Nut 3/8 inch Gold
Gold. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.
€2,58
including VAT
19%
, [plus shipping]
M8 Pot Gender Rubber Ring
When you are using an M8 pot with a 3/8 inch hole or control plate, then this rubber ring will help to keep the pot aligned safely in the middle.
€0,30
including VAT
19%
, [plus shipping]
Befaco Bananut Blue
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Blue.
€0,86
including VAT
19%
, [plus shipping]
Befaco Bananut Green
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Green.
€0,86
including VAT
19%
, [plus shipping]
Washer IND-45-Gold
Indicator washer, gold. 45 degrees angled indicator tip. Commonly used with potentiometers as indicator mark. Makes finding the correct settings easy.
€1,29
including VAT
19%
, [plus shipping]
Washer Keystone 3119
High quality flat fibre washer wirh 3,5mm inner diameter and 6,35mm outer diameter.
€0,19
including VAT
19%
, [plus shipping]
Washer Chassis Ground 15/32 inch
Chassis ground washer for 15/32 inch hardware such as footswitches, full-size Carling toggles, and Switchcraft toggles. These grounding lug washers have a 0.48 inch inner diameter and also work with M12 hardware. The 1/4 inch tab can be used with quick disconnects or can be directly soldered to wire.
€2,75
including VAT
19%
, [plus shipping]
Keystone Nut 9600
Hex nut, made by Keystone Electronics, model 9600. Zinc plated steel. UNC 4-40 thread.
€0,19
including VAT
19%
, [plus shipping]
Dress Nut FS-1532-Metal Black
Carling dress nut for footswitches. Black. These dress nuts are made of metal and feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with M12 bushings.
€2,00
including VAT
19%
, [plus shipping]
Dress Nut FS-1532-Black
Carling dress nut for footswitches. Black. These dress nuts are made of durable plastic and feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is not capped so they can thread past the top of the bushing. These fit any 15/32-32UNS bushing but can also work with M12 bushings.
€1,25
including VAT
19%
, [plus shipping]
Cliff metal nut
Hexagonal, plated steel nut for Cliff UK jacks. This nut fits Cliff jacks with 7/16 inch UNF, 20 TPI threading.
€1,31
including VAT
19%
, [plus shipping]
Finishing Nut 3/8 inch Black Nickel
Black Nickel. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.
€1,58
including VAT
19%
, [plus shipping]
Washer, 13mm steel, thick
Tin plated steel washer. Inner diameter: 13mm. Outer diameter: 23,5mm. Thickness 2,5mm.
€0,20
including VAT
19%
, [plus shipping]
Dress Nut MT-1440-UC
Carling dress nut for mini toggle switches. Thread: 1/4-40 UNS. This nut is not capped allowing the nut to thread past the top of the switch's bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look. Two sides are flatted for use with a tool when fastening.
€2,12
including VAT
19%
, [plus shipping]
Befaco Bananut Red
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Red.
€0,86
including VAT
19%
, [plus shipping]
Dress Nut MT-1440-Black
Carling dress nut for mini toggle switches. Black. Thread: 1/4-40 UNS. These plated dress nuts feature a chamfered edge for a professional look. Two sides are flatted for use with a tool when fastening.
€2,06
including VAT
19%
, [plus shipping]
Serrated washer 3,7mm
Stainless Steel internal tooth lockwasher with a 3,7mm interior diameter.
€0,19
including VAT
19%
, [plus shipping]
Washer IND-POT-Gold
Indicator washer, gold. 90 degrees angled indicator tip. Commonly used with potentiometers as indicator mark. Makes finding the correct settings easy.
€1,29
including VAT
19%
, [plus shipping]
Dress Nut MT-1440-UC-WIDE
Threaded through wide dress nut for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch's bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting.
€1,94
including VAT
19%
, [plus shipping]
Washer 12mm steel, XXL
want to make your pedal stand out with an eyecatcher footswitch washer? Look no further…Outer diameter: 31,5mm. Inner diameter: 12mm
custom made for Banzai
custom made for Banzai
€0,57
including VAT
19%
, [plus shipping]
Befaco Bananut White
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Silver.
€0,86
including VAT
19%
, [plus shipping]
Lockwasher, 3/8 inch serrated
Serrated lockwasher. 3/8 inch.
€0,42
including VAT
19%
, [plus shipping]
Shoulder washer 4698
Keystone Hardware. Shoulder Washer. Inner Diameter: 3,5mm. Outer Diameter: 6,5mm.
€0,23
including VAT
19%
, [plus shipping]
Finishing Nut 3/8 inch Black
Black. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.
€0,82
including VAT
19%
, [plus shipping]
Lockwasher, 6mm Split
Lockwasher, split. DIN 127. Inner diameter 6mm.
€0,19
including VAT
19%
, [plus shipping]
Washer M3 Flat Black
High quality nylon M3 flat washers. Set contains 10 pieces. These durable washers fit perfectly on M3 threaded screws. The small outside diameter provides a clean look beneath the head of the screw.
€1,31
including VAT
19%
, [plus shipping]
Lockwasher, 5mm Split
Lockwasher, split. DIN 127. Inner diameter 5mm.
€0,19
including VAT
19%
, [plus shipping]
Befaco Bananut Yellow
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Yellow.
€0,86
including VAT
19%
, [plus shipping]
Washer M9-JACK-GLD
M9 washer, gold. Commonly used with audio jacks.
€0,38
including VAT
19%
, [plus shipping]
Washer 12mm steel 1,2mm Black
Black color. For footswitches. Inner diameter: 12mm, outer diameter: 17,5mm, thickness: 1,2mm.
€0,31
including VAT
19%
, [plus shipping]
Dress Nut FS-1532-Metal Nickel
Carling dress nut for footswitches. Nickel. These dress nuts are made of metal and feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with M12 bushings.
€2,00
including VAT
19%
, [plus shipping]
Washer IND-45-Nickel
Indicator washer, nickel. 45 degrees angled indicator tip. Commonly used with potentiometers as indicator mark. Makes finding the correct settings easy.
€0,89
including VAT
19%
, [plus shipping]
Befaco Bananut Black M7
Larger threaded black Bananut for mounting potentiometers or other hardware with M7 bushings. These nuts look great beneath smaller sized knobs. Black.
€0,87
including VAT
19%
, [plus shipping]
Befaco Bananut Black
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Black.
€0,86
including VAT
19%
, [plus shipping]
Lockwasher, 12mm Split
Lockwasher, split. DIN 127. Inner diameter 12mm.
€0,19
including VAT
19%
, [plus shipping]
Serrated washer 3,2mm
Stainless Steel internal tooth lockwasher with a 3,2mm interior diameter.
€0,19
including VAT
19%
, [plus shipping]
Shoulder washer 3186
Polyamid shoulder Washer. Inner Diameter: 10,2mm. Outer Diameter: 18,0mm.
€0,29
including VAT
19%
, [plus shipping]
Benzing Circlip 6,35mm
Benzing Circlip for quick mounting. Made of steel, black.
€0,27
including VAT
19%
, [plus shipping]
Shoulder washer 4702
Keystone Hardware. Shoulder Washer. Inner Diameter: 5mm. Outer Diameter: 9,5mm.
€0,26
including VAT
19%
, [plus shipping]
Washer M8 Nickel
Washer M8 Nickel. Outside diameter: 12,0mm. Inside diameter: 8,2mm.
€0,25
including VAT
19%
, [plus shipping]
Finishing Nut 3/8 inch Chrome
Chrome. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.
€0,73
including VAT
19%
, [plus shipping]
Lockwasher, 10mm Split
Lockwasher, split. DIN 127. Inner diameter 10mm.
€0,19
including VAT
19%
, [plus shipping]
Lockwasher, 8mm Split
Lockwasher, split. DIN 127. Inner diameter 8mm.
€0,19
including VAT
19%
, [plus shipping]
Nut M12-HEX-GLD
M12 hex nut, gold. Commonly used with switches. M12.0-1.00P.
€0,35
including VAT
19%
, [plus shipping]
Nut M9-POT-BK
M9 hex nut, black. Commonly used with jacks.
€0,33
including VAT
19%
, [plus shipping]
Shoulder washer 3126
Polyamid shoulder Washer. Inner Diameter: 12,2mm. Outer Diameter: 25,0mm.
€0,55
including VAT
19%
, [plus shipping]
Washer M9-JACK-NI
M9 washer, nickel. Commonly used with audio jacks.
€0,32
including VAT
19%
, [plus shipping]
Headless screw M2,5x5
Headless screw M2,5, length 5mm. Stahl 4,8. Zinc plated A2K 5um-blue
€0,36
including VAT
19%
, [plus shipping]
Dress Nut MT-1440-Natural
Carling dress nut for mini toggle switches. Thread: 1/4-40 UNS. These plated dress nuts feature a chamfered edge for a professional look. Two sides are flatted for use with a tool when fastening.
€1,02
including VAT
19%
, [plus shipping]
Shoulder washer 3065
Keystone Hardware. Shoulder Washer. Inner Diameter: 4mm. Outer Diameter: 9,5mm.
€0,23
including VAT
19%
, [plus shipping]
Threaded insert M2.5
Threaded brass insert. M2.5. Length: 2,6mm.
€0,29
including VAT
19%
, [plus shipping]
Nut M12-VINT-GLD
M12 vintage style round nut, gold. Inch thread. Commonly used with switches or with thick top guitars.
€1,15
including VAT
19%
, [plus shipping]
Shoulder washer 3062
Keystone Hardware. Shoulder Washer. Inner Diameter: 3mm. Outer Diameter: 6,5mm.
€0,31
including VAT
19%
, [plus shipping]
Lockwasher, 12mm flat
Lockwasher, made of tin plated steel. Inner diameter: 12mm. Outer diameter: 17,2mm. Inner toothing.
€0,23
including VAT
19%
, [plus shipping]
Nut M9-POT-GLD
M9 hex nut, gold. Commonly used with jacks.
€0,35
including VAT
19%
, [plus shipping]
Shoulder washer 4711
Keystone Hardware. Shoulder Washer. Inner Diameter: 6,35mm (1/4 inch). Outer Diameter: 13mm.
€0,26
including VAT
19%
, [plus shipping]
Nut M6-MINI-GLD
M6 hex nut, gold. Commonly used with toggle switches. Thread technical specification: M6.0-0.75P.
€0,30
including VAT
19%
, [plus shipping]
Washer 12mm steel, large
heavy duty look for your pedal
custom made for Banzai
custom made for Banzai
€0,29
including VAT
19%
, [plus shipping]
Switchcraft washer S1028
Switchcraft rigid plastic washer for 3/8 inch (9,5mm) bushing. Brown. Perfect for insulating metal bushings from the chassis.
€0,48
including VAT
19%
, [plus shipping]
Washer M6-MINI-GLD
M6 washer, gold. Commonly used with toggle switches.
€0,26
including VAT
19%
, [plus shipping]
Nut, M10
10mm, high quality nut. Metric thread. Thread: M10x0,75mm.
€0,40
including VAT
19%
, [plus shipping]
Washer 12mm steel 1,2mm
for footswitches. Inner diameter: 12mm, outer diameter: 17,5mm, thickness: 1,2mm.
€0,23
including VAT
19%
, [plus shipping]
Nut M12-HEX-BK
M12 hex nut, black. Commonly used with switches. M12.0-1.00P.
€0,31
including VAT
19%
, [plus shipping]