Home > Electronic Parts > Electromechanical > Hardware > Nuts and Washers

Nuts and Washers

Products

9,5mm flat washer
9,5mm (3/8 inch) nylon washer. Can be used with Alpha 24mm potentiometers.
€0,17
including VAT 19% , [plus shipping]
Qty
Alpha 12mm lockwasher
12mm lockwasher for footswitches, made by Alpha.
€0,23
including VAT 19% , [plus shipping]
Qty
Alpha 12mm washer
12mm washer for footswitches, made by Alpha. Chrome.
€0,23
including VAT 19% , [plus shipping]
Qty
Alpha M7x0.075 nut for Alpha 16mm pots
Replacement for Alpha 16mm pots.
€0,26
including VAT 19% , [plus shipping]
Qty
Alpha Nut M12
Nut M12 for footswitches, made by Alpha. Chrome.
€0,23
including VAT 19% , [plus shipping]
Qty
Alpha Washer POT-16-NI
Alpha washer for 16mm potentiometers. M7 diameter.
€0,21
including VAT 19% , [plus shipping]
Qty
Alpha Washer POT-24-NI
Alpha washer for 24mm potentiometers. M8 diameter.
€0,21
including VAT 19% , [plus shipping]
Qty
Befaco Bananut Black
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Black.
€0,86
including VAT 19% , [plus shipping]
Qty
Befaco Bananut Black M7
Larger threaded black Bananut for mounting potentiometers or other hardware with M7 bushings. These nuts look great beneath smaller sized knobs. Black.
€0,87
including VAT 19% , [plus shipping]
Qty
Befaco Bananut Blue
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Blue.
€0,86
including VAT 19% , [plus shipping]
Qty
Befaco Bananut Green
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Green.
€0,86
including VAT 19% , [plus shipping]
Qty
Befaco Bananut Orange
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Orange.
€0,86
including VAT 19% , [plus shipping]
Qty
Befaco Bananut Purple
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Purple.
€0,86
including VAT 19% , [plus shipping]
Qty
Befaco Bananut Red
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Red.
€0,86
including VAT 19% , [plus shipping]
Qty
Befaco Bananut White
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Silver.
€0,86
including VAT 19% , [plus shipping]
Qty
Befaco Bananut Yellow
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Yellow.
€0,86
including VAT 19% , [plus shipping]
Qty
Benzing Circlip 6,35mm
Benzing Circlip for quick mounting. Made of steel, black.
€0,27
including VAT 19% , [plus shipping]
Qty
Cage Nut M5
Cage nut M5.
€0,54
including VAT 19% , [plus shipping]
Qty
Cage Nut M6
Cage nut M6.
€1,02
including VAT 19% , [plus shipping]
Qty
Cliff metal nut
Hexagonal, plated steel nut for Cliff UK jacks. This nut fits Cliff jacks with 7/16 inch UNF, 20 TPI threading.
€1,31
including VAT 19% , [plus shipping]
Qty
CTS Flat Washer
Flat Washer for CTS pots. Fits 3/8 inch (9,5mm) bushings.
€0,46
including VAT 19% , [plus shipping]
Qty
Dress nut for Carling switches
Round dress nut for Carling switches. Fits series 316, 110, etc.

€0,68
including VAT 19% , [plus shipping]
Qty
Dress Nut FS-1532-Black
Carling dress nut for footswitches. Black. These dress nuts are made of durable plastic and feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is not capped so they can thread past the top of the bushing. These fit any 15/32-32UNS bushing but can also work with M12 bushings.
€1,25
including VAT 19% , [plus shipping]
Qty
Dress Nut FS-1532-Metal Black
Carling dress nut for footswitches. Black. These dress nuts are made of metal and feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with M12 bushings.
€2,00
including VAT 19% , [plus shipping]
Qty
Dress Nut FS-1532-Metal Nickel
Carling dress nut for footswitches. Nickel. These dress nuts are made of metal and feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with M12 bushings.
€2,00
including VAT 19% , [plus shipping]
Qty
Dress Nut FS-1532-Red
Carling dress nut for footswitches. Red. These dress nuts are made of durable plastic and feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is not capped so they can thread past the top of the bushing. These fit any 15/32-32UNS bushing but can also work with M12 bushings.
€1,25
including VAT 19% , [plus shipping]
Qty
Dress Nut FS-1532-White
Carling dress nut for footswitches. White. These dress nuts are made of durable plastic and feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is not capped so they can thread past the top of the bushing. These fit any 15/32-32UNS bushing but can also work with M12 bushings.
€1,25
including VAT 19% , [plus shipping]
Qty
Dress Nut MT-1440-Black
Carling dress nut for mini toggle switches. Black. Thread: 1/4-40 UNS. These plated dress nuts feature a chamfered edge for a professional look. Two sides are flatted for use with a tool when fastening.
€2,06
including VAT 19% , [plus shipping]
Qty
Dress Nut MT-1440-Natural
Carling dress nut for mini toggle switches. Thread: 1/4-40 UNS. These plated dress nuts feature a chamfered edge for a professional look. Two sides are flatted for use with a tool when fastening.
€1,02
including VAT 19% , [plus shipping]
Qty
Dress Nut MT-1440-UC
Carling dress nut for mini toggle switches. Thread: 1/4-40 UNS. This nut is not capped allowing the nut to thread past the top of the switch's bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look. Two sides are flatted for use with a tool when fastening.
€1,88
including VAT 19% , [plus shipping]
Qty
Dress Nut MT-1440-UC-WIDE
Threaded through wide dress nut for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch's bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting.
€1,94
including VAT 19% , [plus shipping]
Qty
Dress Nut SC-DRESS-LARGE
Switchcraft shouldered hex nuts for 3/8 inch -32 UNEF-2A threaded bushings. These nuts include a rubber grommet for use in sealed systems and also add a unique look to any build such as pedals or amplifiers. This nut is intended for panel or chassis thicknesses of 1,27 - 2,3mm. (0.05 - 0.09 inch).
€2,08
including VAT 19% , [plus shipping]
Qty
Dress Nut SC-DRESS-SMALL
Switchcraft shouldered hex nuts for 3/8 inch -32 UNEF-2A threaded bushings. These nuts include a rubber grommet for use in sealed systems and also add a unique look to any build such as pedals or amplifiers. This nut is intended for panel or chassis thicknesses of 2,4 - 3,2mm. (0.095 - 0.125 inch).
€2,13
including VAT 19% , [plus shipping]
Qty
Fender lockwasher
Original Fender lock washers for Fender potentiometers. Package of 12.
€6,26
including VAT 19% , [plus shipping]
Qty
Finishing Nut 3/8 inch Black
Black. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.
€0,82
including VAT 19% , [plus shipping]
Qty
Finishing Nut 3/8 inch Black Nickel
Black Nickel. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.
€1,58
including VAT 19% , [plus shipping]
Qty
Finishing Nut 3/8 inch Chrome
Chrome. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.
€0,73
including VAT 19% , [plus shipping]
Qty
Finishing Nut 3/8 inch Gold
Gold. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.
€2,58
including VAT 19% , [plus shipping]
Qty
Finishing Nut 3/8 inch Nickel
Nickel. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.
€1,25
including VAT 19% , [plus shipping]
Qty
Headless screw M2,5x5
Headless screw M2,5, length 5mm. Stahl 4,8. Zinc plated A2K 5um-blue
€0,36
including VAT 19% , [plus shipping]
Qty
Headless screw M3, 6mm
Headless screw M3, length 6mm. Polyamid 6.6 natural color.
€0,46
including VAT 19% , [plus shipping]
Qty
Headless screw M3x4
Headless screw M3, length 4mm. Black.
€0,31
including VAT 19% , [plus shipping]
Qty
Hex nut BM12x1,5
Hex nut BM12x1,5
€0,44
including VAT 19% , [plus shipping]
Qty
Hex Nut M10
General purpose nut, M10.
€0,27
including VAT 19% , [plus shipping]
Qty
Hex Nut M10x0,75
Hex Nut M10x0,75. High type. Made of zinc plated steel. M 10x0,75.
€0,63
including VAT 19% , [plus shipping]
Qty
Hex Nut M3
General purpose nut, M3.
€0,14
including VAT 19% , [plus shipping]
Qty
Hex Nut M4
General purpose nut, M4.
€0,14
including VAT 19% , [plus shipping]
Qty
Lockwasher 8,4mm 100 pieces
Lockwasher, made of tin plated steel. Inner diameter: 8,4mm. Outer diameter: 15mm. Package contains 100 pieces.
€4,11
including VAT 19% , [plus shipping]
Qty
Lockwasher, 10mm serrated
Serrated lockwasher. DIN6798. Steel.
€0,17
including VAT 19% , [plus shipping]
Qty
Lockwasher, 10mm Split
Lockwasher, split. DIN 127. Inner diameter 10mm.
€0,19
including VAT 19% , [plus shipping]
Qty
 
The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.