Search results

Electrolytic Axial. Made in Taiwan by SSC. Temperature rating: 85°C. Dimensions (D x L): 13x25 mm

Metal Film Resistor 1% 0,25W, 0207. Package contains 100 pieces.

Metal Film Resistor 1% 0,6W, 0207

Carbon Composition Resistor 10% 0,5W

Metal oxide resistor, 3W.
Rated voltage: 350 V. Tolerance 5%.

Carbon Film Resistor 5% 0,25W, 0207. Package contains 100 pieces.

Electrolytic Radial
Dimensions (D x L): 5x11 mm, RM2

100V, Tolerance: 10%. LS: 5mm

The Tung-Sol 6SN7GTB is one of the best currently in production 6SN7 tubes.

Power Metal Oxide Resistor 5% 2W, Umax=500V

Zener Diode 1,3W 8,2V

ACP Trimpot
CA14 , horizontal, pin spacing: 10,0x5,0mm
0,25W, -25..70'C, 250V

ACP Trimpot
CA6 Mini, vertical, 5x2.5mm
0,1W, -25..'C, 100V

ACP Trimpot
CA9 , vertical, pin spacing: 5x2.5mm
0,15W, -25..70'C, 100V

12mm, D-Shaft, Mono Potentiometer
Can be used with D-shaft knobs or full shaft set screw knobs

Alpha potentiometer with knurled clear plastic shaft in which an LED can be placed at the bottom to illuminate the shaft. Any color 3mm LED can be used. Mono potentiometer, PC mount. Size: 15x15mm. Tolerance: +/-20%. Rated Wattage: 0,05W. Rated voltage: 50V AC. Rotational Life: 15000 cycles. Rotation torque: 20 to 200g/cm. Insulation resistance: 100M Ohm at 250VDC. Breakdown voltage: 300VAC for one minute. Applications include: Video, computers, audio equipment, communications.

Alpha 16mm, knurled split shaft, mono potentiometer. Solder lugs. With push/pull DPDT switch (30VDC, 0,3A). Material: Carbon Composition. Shaft length: 8,5mm. Shaft diameter: 6,3mm.

Alpha 16mm, full shaft, mono potentiometer with solder lugs. Material: Carbon Composition. Shaft length: 13,5mm. Shaft diameter: 6,3mm.

Knurled split shaft, mono Alpha potentiometer, with right angled PC mount vertical terminals. 16mm body diameter.

Alpha 16mm, knurled split shaft, mono potentiometer, solder lugs. Material: Carbon Composition. Shaft length: 8,5mm. Shaft diameter: 6,0mm.

16mm, Split Shaft, Mono Potentiometer

Alpha 24mm, full shaft, mono potentiometer with solder lugs and SPST turn-on switch. Material: Carbon Composition. Shaft length: 8,5mm. Shaft diameter: 6,3mm.

24mm, Full Shaft, Mono Potentiometer

24mm, full shaft, mono potentiometer. Potentiometer has a 3/8 inch diameter thread.

Full shaft, mono Alpha potentiometer, with right angled PC mount vertical terminals. 11 detent positions. 9mm body diameter. Axis diameter: 6,3mm.

Alpha 9mm potentiometer, full black shaft. PC mount vertical.

Alpha potentiometer with bushing and knurled clear plastic shaft in which an LED can be placed at the bottom to illuminate the shaft. Any color 3mm LED can be used. Mono potentiometer, PC mount.

Audiophile axial MKP capacitor. 630VDC. Tolerance 3%. Size (LxD): 36x56,5mm.

Audyn MKP Cap film foil capacitor with polypropylene. Tolerance: 5%

Audyn Cap Q6. High Quality MKT Polypropylene Foil Cap. Used in active audio circuits and tube amps. Tolerance: 5%. Size (LxD): 35x20mm.

Audyn Cap QS6. High Quality Polypropylene Foil Cap. Used in active audio circuits and tube amps. Tolerance: 5%. Size (LxD): 41x24mm.

Audyn ERA Elko. Axial. Tolerance: 10%. Size (LxD): 35x14mm.

Audyn MKT polyester Cap. Axial. Tolerance: 5%. Size (LxDxH): 32x8x17,5mm.

MKP film capacitor with polypropylene foil, copper wire, tinned. Nominal voltage: 800V. Tolerance: &177;5%. Dimensions (DxL): 30x45mm.

Audyn's third generation copper cap, the True Copper MAX, combines the acoustic and technical properies of the True Copper series, the Plus and the Reference series. Full OFC copper-foil-copper-polypropylene capacitor for exacting and high quality loudspeaker applications. Size (DxL): 63x60mm.

Premium Polypropylene Capacitors. Size (LxD): 30x23mm.

Made from a block of solid metal. Measures 48mm diagonally, weighs over 100 grams.
6,3mm round shaft, fastened by two set screws. Anodized black.

Metal film resistor, made by Vishay Beyschlag. Tolerance: 1%. Power: 0,6W. Package: 0207.

High-quality Bourns 3362P trimpots. These single-turn cermet trimmers can be found in countless guitar pedals and synthesizer modules. Sealed trimmers are built with an o-ring seal to prevent entrance of moisture and serve as a mechanical restraint to prevent unwanted wiper movement. ±10% tolerance.

Diameter: 19mm, height: 11,6mm.
6,3mm round shaft, set screw. Green inlay.

Heavy Duty True Bypass switch.

Cornell Dubilier Premium Audio Capacitors. These capacitors deliver the performance of other capacitors which have cases that are twice as big. Sub-Miniature Metallized Polyester Film, self healing. 630V, RM15
0,22uF=220nF. Size (LxDxH): 18,5x9,5x17mm.

Ceramic HV 330pF 500V capacitor. Tolerance: +/- 5%. Lead spacing: 5mm

Cornell Dubilier SLPX 330uF 250V. Long life and high ripple capability. Perfect for DC filtering and power supply applications. Diameter: 0,866 inch (22,00mm). Height: 1,181 inch (30,00mm). Tolerance: ± 20%.

Covers holes that are no longer needed. Quick, easy and low cost. The convex head phases out to a thin edge, forming a neat covering. Black.
Hole size: 25,4mm. Cap diameter: 30,5mm. Maximum wall thickness: 3,2mm.

CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Extra long thread bushing length: 19mm (3/4 inch). 500k lin. Most commonly used in American amps and guitars. Smooth action - top quality!

Chassis mount High Quality DC Power jack 2,1mm

Dome knob, chrome, heavy duty quality. For 6mm axis. With set screw.

Gauges: 009-011-016-026w-032w-042w
Strings with rainbow colored coating (each string has a different color)