Search results

20x20cm square of velcro material (loop part). Color: black.

Vishay BC Components 021 series polarized aluminum electrolytic capacitors, non-solid electrolyte. Axial leads, cylindrical aluminum case, insulated with a blue sleeve. Dimensions (LxD): 30,5

These metal film resistors look and sound great in vintage and vintage-style builds and have been used in high-end Marshall amplifiers and other audio equipment.

These metal film resistors look and sound great in vintage and vintage-style builds and have been used in high-end Marshall amplifiers and other audio equipment.

Wirewound audio resistor, made by Vitrohm. Size (LxWxH): 50 x 9 x 9mm. Power rating: 11W. Tolerance: 10%. Wound on a fiber core with special direct contact terminals. Embedded in a cement sealed ceramic tube. Axial.

Wirewound audio resistor, made by Vitrohm. Size (LxWxH): 25 x 6,4 x 6,4mm. Power rating: 5W. Tolerance: 10%. Wound on a fiber core with special direct contact terminals. Embedded in a cement sealed ceramic tube. Axial.

High Quality Electrolytic Cap made by Weber. General purpose replacement for power supplies, cathode bias, and other applications requiring high capacitance. Voltage rating: 50VDC. Size (LxD): 13x6,5mm.

FKP1 10%, LS15, 1000VDC / 600VAC.
Dimensions (T x H x W): 5x11x18 mm. Polypropylene foil, metallized on both sides. Impulse resistant, self healing.

MKP 100nF 1000V 10% RM22. Size (LxDxH): 26x8,5x18,5mm.

WIMA MKS2 capacitor, 100V. Tolerance: 10%. Lead spacing: 5 mm.
Dimensions (L x H x W): 7,2 x 6,5 x 2,5 mm

Stranded high quality tinned hook-up wire, copper. AWG 22 gauge (0,32mm2 crossectional area). 600V, insulated. UL style 1015. Temperature rating: 105'C. Length: 50ft spool (15,24m). Purple.

Strain relief for cables. Made of nylon. Screw-mount.
Hole distance: 17mm. Length: 24mm. For flat cables.

Custom made CTS 250k 'Dimple Back' potentiometer with a special Vintage Audio Taper (30% Log). 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 1-4 inch (6,4mm).

Custom made CTS 50k REV log 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).

Custom made CTS 500k log 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).

Electrolytic Radial
Dimensions (D x L): 10x20mm. Spacing: 5,0mm.

Bourns Guitar Potentiometer, square, 16mm, mono (with extra long thread). Knurled shaft.
Conductive Plastic Element, very low noise, long life (100.000 cycles)
These high quality audio potentiometers made by Bourns are suitable for use in both professional and consumer applications. The most popular applications are electric guitars, sound processing equipment, and sound system amplifiers.

Custom made CTS 1M log 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).

Small grey plastic indicator knob with gray inlay on top.
6mm round split shaft, push-on.

Custom made CTS 250k 'Dimple Back' potentiometer with a special Vintage Audio Taper (30% Log). 6,0mm knurled split shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 1/4 inch (6,35mm).

Custom made CTS 500k 'Dimple Back' potentiometer with a special Vintage Audio Taper (30% Log) and long thread. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 19mm.

Electrolytic Radial
Dimensions (D x L): 13x20 mm, RM5

Wirewound Resistor 5% 50W, RH25

Zener Diode 0,5W 16V DO35

Carbon Composition Resistor 10% 0,5W

Zener Diode 5W 18V

Wirewound Resistor 5% 25W. Chassis mount. Dimensions (LxWxH): 27,5 x 14 x 15mm.

2x 9V or 4x Mignon. Battery contacts are integrated. Battery accessible from the outside. Snap-In-Mount.

Wirewound Resistor 5% 5W. Size: 10x9x22mm. Tinned copper leads.

Wirewound Resistor 10% 11W, 9x9x50mm.

Carbon Film Resistor 5% 0,25W, 0207

Electrolytic Axial.
Dimensions (D x L): 6x10 mm

Metal Film Resistor 1% 0,25W, 0207

Metal Film Resistor 1% 0,6W, 0207

Metal Film Resistor 1% 0,6W, 0207

Metal Film Resistor 1% 0,25W, 0207

Knurled split shaft, mono Alpha potentiometer, with right angled PC mount vertical terminals. 16mm body diameter.

Alpha 16mm, knurled split shaft, mono potentiometer, solder lugs. Material: Carbon Composition. Shaft length: 8,5mm. Shaft diameter: 6,0mm.

24mm, Full Shaft, Mono Potentiometer

Full shaft, mono Alpha potentiometer, with PC mount terminals. 9mm body diameter. Axis diameter: 6,3mm.

Full metal, machined aluminum, anodized black with white index mark on the top.
6,3mm round shaft.
Set screw.

Amphenol Audio M-series phone plug. Stereo. Straight. 1/4 inch (6,35mm). Nickel plated contacts. Stylish grey satin shell design with ergonomic grip. Robust diecast shell. Precision machined contacts. Flexible grommet cable protection. Thermoplastic backshell. Great solderability with increased solder area. Quick and easy assembly.

Black ESD Conductive foam is made of Polyurethane material and is corrosion resistant. It is used for long term storage and shipping of small electronic parts. ESD Conductive foam is corrosion resistant and durable.
Sheet: 400x250x5mm.

Audyn Cap Q4. High Quality Polypropylene Foil Cap. Used in active audio circuits and tube amps. Tolerance: 5%. Size (LxD): 35x25mm.

Audyn Cap QS4. High Quality Polypropylene Foil Cap. Used in active audio circuits and tube amps. Tolerance: 5%. Size (LxD): 66x36mm.

Audyn MKT polyester Cap. Tolerance: 5%. Size (LxD): 26x10mm.

Audyn's third generation copper cap, the True Copper MAX, combines the acoustic and technical properies of the True Copper series, the Plus and the Reference series. Full OFC copper-foil-copper-polypropylene capacitor for exacting and high quality loudspeaker applications. Size (DxL): 75x120mm.

Precision Metal Film Resistor. Tolerance: 0,1%. Power: 0,4W. Package: 0207. Made by Vishay Beyschlag.

Epoxy board with copper plating (35um). Board thickness 1,5mm.
Size: 300x200mm.