Search results

Talema toroidal transformer, PC-mount. Primary: 2x115VAC, Secondary: 2x7V. Power rating: 25VA

Tokyo Cosmos aka TOCOS is known worldwide for their high quality potentiometers. The RV24 Series is a 24mm military-style carbon element potentiometer with a tolerance of 10%, praised by both guitar and hifi amp builders for their performance and reliability. Each potentiometer includes a nut, flush washer, and lock washer.

Price per 50 cm segment. Includes hook and loop pieces. Used to secure effects pedals, cables etc.
Color: black. Industrial Strength, adhesive back.

Vishay BC Components 021 series polarized aluminum electrolytic capacitors, non-solid electrolyte. Axial leads, cylindrical aluminum case, insulated with a blue sleeve. Dimensions (LxD): 18

These metal film resistors look and sound great in vintage and vintage-style builds and have been used in high-end Marshall amplifiers and other audio equipment.

These metal film resistors look and sound great in vintage and vintage-style builds and have been used in high-end Marshall amplifiers and other audio equipment.

Wirewound audio resistor, made by Vitrohm. Size (LxWxH): 38 x 9 x 9mm. Power rating: 10W. Tolerance: 10%. Wound on a fiber core with special direct contact terminals. Embedded in a cement sealed ceramic tube. Axial.

Wirewound audio resistor, made by Vitrohm. Size (LxWxH): 50 x 9 x 9mm. Power rating: 11W. Tolerance: 10%. Wound on a fiber core with special direct contact terminals. Embedded in a cement sealed ceramic tube. Axial.

Great Sounding Polypropylene Cap made by Weber. Great for decoupling, interstage audio coupling, and other general purpose use. This capacitor is modeled after the Sprague Orange Drop 716P series capacitor. Voltage rating: 630V. Size (LxDxH): 16,5x5x8,5mm.

FKP2 5%, LS5, 630V.
Dimensions (T x H x W): 4,5x6x7,2 mm. Polypropylene foil. Impulse resistant, negative TK-value, low dielectric absorption.

MKP4 0,068uF, 630 VDC/280 VAC, Tolerance: 10%, LS 15 mm,
Dimensions (D x H x W): 6x12,5x18 mm

WIMA MKS2 capacitor, 63V. Tolerance: 10%. Lead spacing: 5 mm.
Dimensions (L x H x W): 7,2 x 6,5 x 2,5 mm

High quality, stranded, small ring. Length: 10m.

Open jack, 6,3mm. Mono. Gold thread with Gold hardware. Standard thread length with short clamp inside, useful where space is limited. Made by Partsland for use in musical instruments or where a long life is required.

High quality long shaft (19mm) 500k log CTS potentiometer with Push-pull DPDT switch. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Perfect for phase switching, coil tapping, series/parallel, etc.

Marshall potentiometer A200k lin PC mount vertical, 11mm. For Marshall Valvestate II and AVT-Series.

Gold. High-grade brass knob for potentimeters with 6mm shaft. Knurled side, with marker notch. M4 fastening screw. Diameter: 18mm. Height: 18,5mm.

Audyn MKT polyester Cap. Tolerance: 5%. Size (LxD): 31x17mm.

CE manufactured FP type can caps are made in the USA to the same specifications. Twist lock / solder lugs. Size (LxD): 90x35mm.

Dust cover for smaller low profile DC power jacks like the Lumberg PSU 1614-09. This cover is simple to install and can help protect the power jack on effects pedals and other electronics using this style of DC jack.

Cord and spring kit for Ernie Ball Junior pedals.

Peavey knob for mini switch. Black.

XLR-6 Jack, chassis mount. Gold plated contacts.

CTS 17mm stereo balance/blend linear taper potentiometer with center detent. Knurled split shaft. Includes nut and washer.
These high quality audio potentiometers made by CTS are suitable for use in both professional and consumer applications. The most popular applications are electric guitars, sound processing equipment, and sound system amplifiers.

Direct Marshall replacement for hardwired series. Metal Axis 6,3mm, Body 24mm. extra long threaded area

Split Shaft, for all knobs.

Dust cover for standard size DC power jacks like the Lumberg NEB/J 21C. This cover is simple to install and can help protect the power jack on effects pedals and other electronics using this style of DC jack.

Chrome. High-grade brass knob for potentimeters with 6mm shaft. Knurled side, with marker notch. M4 fastening screw. Diameter: 22mm. Height: 15mm.

Wirewound Resistor 5% 5W. Size: 10x9x22mm. Tinned copper leads.

Carbon Composition Resistor 5% 0,25W

Zener Diode 0,5W 11V DO35

Zener Diode 5W 14V

Power Metal Oxide Resistor 5% 2W, Umax=500V

Wirewound Resistor 10% 11W, 9x9x50mm.

Metal Film Resistor 1% 0,6W, 0207

Thick Film resistor with heat sink. Power: 100W. Tolerance: 5%. Size: 38x25x9mm.

precision machine pin, gold plated IC socket

Metal Film Resistor 1% 0,25W, 0207

Metal Film Resistor 1% 0,6W, 0207

Metal Film Resistor 1% 0,25W, 0207

Wirewound Resistor 5% 25W. Chassis mount. Dimensions (LxWxH): 27,5 x 14 x 15mm.

Carbon Film Resistor 5% 0,25W, 0207. Package contains 100 pieces.

Full shaft, mono Alpha potentiometer, with long right angled PC mount vertical terminals. 16mm body diameter.

Knurled split shaft, mono Alpha potentiometer, with right angled PC mount vertical terminals. 16mm body diameter.

Alpha 16mm, knurled split shaft, mono potentiometer, solder lugs. Material: Carbon Composition. Shaft length: 8,5mm. Shaft diameter: 6,0mm.

16mm, Split Shaft, Mono Potentiometer

Alpha 24mm, D-shaft, mono potentiometer, solder lugs. Material: Carbon Composition. Shaft length: 8,5mm. Shaft diameter: 6,3mm.

24mm, Full Shaft, Mono Potentiometer

Full shaft, mono Alpha potentiometer, with right angled PC mount vertical terminals. 9mm body diameter. Axis diameter: 6,3mm.

Alpha 9mm potentiometer, full black shaft. PC mount vertical.