Search results

Carbon Composition Resistor 20% 1W

100V, Tolerance: 10%. LS: 5mm

Power Metal Oxide Resistor 5% 2W, Umax=500V

Wirewound Resistor 5% 5W. Size: 10x9x22mm. Tinned copper leads.

Carbon Composition Resistor 5% 0,25W

100V, Tolerance: 10%. LS: 2,5mm

Zener Diode 1,3W 6,2V

The Tung-Sol legacy continues with the 6L6GC STR. The ultimate in musical tone and smooth overdrive, the STR delivers the sound that established Tung-Sol as the benchmark of quality. Built to the same 'Tube Special Request' specs of leading amplifier manufacturers of the 1960s, the 6L6GC STR is a rugged and reliable power tube for use in the most demanding guitar amplifiers.

ACP Trimpot
CA14 , horizontal, pin spacing: 10,0x5,0mm
0,25W, -25..70'C, 250V

ACP Trimpot
CA6 Mini, horizontal, 5x5mm
0,1W, -25..70'C, 100V

ACP Trimpot
CA9 , horizontal, pin spacing: 5x10mm
0,15W, -25..70'C, 100V

12mm, D-Shaft, Mono Potentiometer. PC mount. Can be used with D-shaft knobs or full shaft set screw knobs

12mm, D-Shaft, Mono Potentiometer
Can be used with D-shaft knobs or full shaft set screw knobs

Alpha potentiometer with knurled clear plastic shaft in which an LED can be placed at the bottom to illuminate the shaft. Any color 3mm LED can be used. Mono potentiometer, PC mount. Size: 15x15mm. Tolerance: +/-20%. Rated Wattage: 0,05W. Rated voltage: 50V AC. Rotational Life: 15000 cycles. Rotation torque: 20 to 200g/cm. Insulation resistance: 100M Ohm at 250VDC. Breakdown voltage: 300VAC for one minute. Applications include: Video, computers, audio equipment, communications.

Alpha 16mm, full shaft, mono potentiometer with solder lugs. 11 detent positions. Material: Carbon Composition. Shaft length: 8,5mm. Shaft diameter: 6,3mm.

Full shaft, stereo potentiometer, with solder lugs. 16mm body diameter.

Full shaft, mono Alpha potentiometer, with long right angled PC mount vertical terminals. 16mm body diameter.

Knurled split shaft, mono Alpha potentiometer, with right angled PC mount vertical terminals. 16mm body diameter.

Alpha 16mm, knurled split shaft, mono potentiometer, solder lugs. Material: Carbon Composition. Shaft length: 8,5mm. Shaft diameter: 6,0mm.

16mm, Split Shaft, Mono Potentiometer

Alpha 17mm, high quality potentiometer. Full shaft, mono, solder lugs. Aluminum shaft and bushing. Body is plated steel with bakelite rear plate. Material: Carbon Composition. Shaft length: 10mm. Shaft diameter: 6,3mm.

24mm, knurled shaft, mono potentiometer with angled PCB mount terminals. Knurled split shaft fits all 6,0mm knobs. 1M Reverse Log.

Alpha guitar pot, 500k log. 6mm knurled split shaft. Vintage sound and characteristics meet modern reliability and long life.

24mm, Full Shaft, Stereo Potentiometer

Full shaft, mono Alpha potentiometer, with right angled PC mount vertical terminals. 9mm body diameter. Axis diameter: 6,3mm.

Full shaft, mono Alpha potentiometer, with PC mount terminals. 9mm body diameter. Axis diameter: 6,3mm.

Knurled split shaft, mono Alpha potentiometer, with right angled PC mount vertical terminals. 9mm body diameter. Axis diameter: 6,0mm.

Alpha potentiometer with bushing and knurled clear plastic shaft in which an LED can be placed at the bottom to illuminate the shaft. Any color 3mm LED can be used. Mono potentiometer, PC mount.

Made for Banzai in ABS, highest quality, with brass insert. Diameter: 21mm. Height: 12mm. Yellow color. 6,3mm axis, set screw.

Audiophile axial MKP capacitor. 400VDC. Tolerance 3%. Dimensions (D x L): 27 x 57mm

Audyn MKP Cap film foil capacitor with polypropylene. Tolerance: 5%

Audyn Cap Q6. High Quality MKT Polypropylene Foil Cap. Used in active audio circuits and tube amps. Tolerance: 5%. Size (LxD): 35x15mm.

Audyn Cap QS6. High Quality Polypropylene Foil Cap. Used in active audio circuits and tube amps. Tolerance: 5%. Size (LxD): 31x22mm.

Audyn ERA Elko. Axial. Tolerance: 10%. Size (LxD): 26x12mm.

Audyn MKT polyester Cap. Axial. Tolerance: 5%. Size (LxDxH): 26x7x15mm.

MKP film capacitor with polypropylene foil, copper wire, tinned. Nominal voltage: 800V. Tolerance: &177;5%. Dimensions (DxL): 22x45mm.

Audyn True Copper Cap. Finest Grade. Tolerance: 2%, non-inductive. Size (LxD): 50x50mm.

Audyn True Silver Cap. Best Choice for high-end audio applications. Tolerance: 2%, non-inductive, self-restoring. Size (LxD): 45x25mm.

Multilayer axial ceramic capacitor MLCC, leaded. Voltage: 50V. Tolerance: 10%. Size (LxD): 4,32x2,54mm.

Replacement thumbscrew for Boss battery compartments. Stainless steel. Not exactly the same color as the original, but it fits.

Metal film resistor, made by Vishay Beyschlag. Tolerance: 1%. Power: 0,6W. Package: 0207.

High-quality Bourns 3362P trimpots. These single-turn cermet trimmers can be found in countless guitar pedals and synthesizer modules. Sealed trimmers are built with an o-ring seal to prevent entrance of moisture and serve as a mechanical restraint to prevent unwanted wiper movement. ±10% tolerance.

Brass spacer bolt, nickel plated. M3 thread (2x interior).
Spacer length: 15mm.

Diameter: 19mm, height: 11,5mm. White.
6,3mm round shaft, set screw
Boss style knob.

Fasten cable ties quickly and securely: Also allows to faten cable ties at hard to access places. Use with any cable tie from 2,4-4,8mm.

Cornell Dubilier Premium Audio Capacitors. These capacitors deliver the performance of other capacitors which have cases that are twice as big. Sub-Miniature Metallized Polyester Film, self healing. 630V, RM15
0,1uF=100nF. Size (LxDxH): 18,5x6,5x14mm.

Ceramic HV 150pF 500V capacitor. Tolerance: +/- 5%. Lead spacing: 5mm

Diameter: 19mm
6,0mm axis, push-on
Taiwanese copy of the Davies #1510

Covers holes that are no longer needed. Quick, easy and low cost. The convex head phases out to a thin edge, forming a neat covering. Black.
Hole size: 19,0mm. Cap diameter: 23,2mm. Maximum wall thickness: 3,2mm.