Search results

Royal Ohm high quality metal oxide resistor, 1 Watt.
Size: 4,0 x 10 mm. Lead size: 0,7 x 28 mm. Rated voltage: 350 V.

Lead spacing: 3,0mm. Voltage: 300V DC. Size (LxDxH): 6,9x3x4,8mm.

Tin Solder spool with 100g. Diameter: 1,50mm. Tin (60 ± 1%) and lead (40 ± 1%) alloy. Flux SW26 - resin, colophony, halide activator. Flux content in the solder: 2,5%. Melting temperature approx. 190°C.

Microphone Cable. HICON XLR. 2m. Black cable with silver plugs.

Song Huei RK0904N tall 9mm trimmer pot. Black shaft with white indicator mark. High quality, long-life, ergonomic pot with easy-grip knurl.

Quality standard for vintage amps.
The Best Electrolytic Money Can Buy!

Securely route cables through enclosures. Protects from pressure and strain
Works with cables of 6,2-7,4mm diameter.
Material: soft-PVC E98727. Mounting hole size: 11,5-12,7mm. Wall thickness: 1,8-2,5mm.

Popular skirtless synth knob. Violet fluted pointer knob with silver inlay. Diameter: 16mm
6,0mm round knurled shaft, push-on.

Taiway DPDT On/On toggle switch. Solder lugs. Short lever. Gold

Tantal Radial 2,5mm

VISHAY Precision Trimpot, vertical, multiturn, cermet, 1/4W 1k
Dimensions: 6,8x5,0mm. Leg spacing: 5,08/2,54mm

19mm
6,3mm axis, set screw
Taiwanese copy of the Davies #1510

Vishay BC Components MKT368 series metallized polyester film capacitor.
Dimensions (WxHxL): 6,3 x 18,5 (21,5) x 26,0mm. Leg Spacing: 22,5mm. Voltage Rating: 400 VDC / 220 VAC.

These metal film resistors look and sound great in vintage and vintage-style builds and have been used in high-end Marshall amplifiers and other audio equipment.

Wirewound audio resistor, made by Vitrohm. Size (LxWxH): 25 x 6,4 x 6,4mm. Power rating: 5W. Tolerance: 10%. Wound on a fiber core with special direct contact terminals. Embedded in a cement sealed ceramic tube. Axial.

Wirewound audio resistor, made by Vitrohm. Size (LxWxH): 25 x 9 x 9mm. Power rating: 8W. Tolerance: 10%. Wound on a fiber core with special direct contact terminals. Embedded in a cement sealed ceramic tube. Axial.

High Quality Electrolytic Cap made by Weber. General purpose replacement for power supplies, cathode bias, and other applications requiring high capacitance. Voltage rating: 450VDC. Body size: 2,59x1,37mm. Size (LxD): 14x26mm.

FKP1 10%, LS15, 1600VDC / 650VAC.
Dimensions (T x H x W): 6x12,5x18 mm. Polypropylene foil, metallized on both sides. Impulse resistant, self healing.

MKP 47nF 630V 10% RM15. Size (LxDxH): 18x6x12,5mm.

MKS02 10%, RM2.5. Size (LxDxH): 4,6x3,8x8,5mm.

Stranded high quality tinned hook-up wire, copper. AWG 22 gauge (0,32mm2 crossectional area). 600V, insulated. UL style 1015. Temperature rating: 105'C. Length: 50ft spool (15,24m). Blue.

Adaptor / converter from XLR to 6,3mm audio jack stereo.

Open jack, 6,3mm. Mono. Gold thread with Gold hardware. Standard thread length with short clamp inside, useful where space is limited. Made by Partsland for use in musical instruments or where a long life is required.

High quality long shaft (19mm) 500k log CTS potentiometer with Push-pull DPDT switch. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Perfect for phase switching, coil tapping, series/parallel, etc.

Marshall potentiometer A200k lin PC mount vertical, 11mm. For Marshall Valvestate II and AVT-Series.

Gold. High-grade brass knob for potentimeters with 6mm shaft. Knurled side, with marker notch. M4 fastening screw. Diameter: 18mm. Height: 18,5mm.

Audyn MKT polyester Cap. Tolerance: 5%. Size (LxD): 31x17mm.

CE manufactured FP type can caps are made in the USA to the same specifications. Twist lock / solder lugs. Size (LxD): 90x35mm.

Dust cover for smaller low profile DC power jacks like the Lumberg PSU 1614-09. This cover is simple to install and can help protect the power jack on effects pedals and other electronics using this style of DC jack.

Cord and spring kit for Ernie Ball Junior pedals.

Peavey knob for mini switch. Black.

XLR-6 Jack, chassis mount. Gold plated contacts.

CTS 17mm stereo balance/blend linear taper potentiometer with center detent. Knurled split shaft. Includes nut and washer.
These high quality audio potentiometers made by CTS are suitable for use in both professional and consumer applications. The most popular applications are electric guitars, sound processing equipment, and sound system amplifiers.

Direct Marshall replacement for hardwired series. Metal Axis 6,3mm, Body 24mm. extra long threaded area

Split Shaft, for all knobs.

Dust cover for standard size DC power jacks like the Lumberg NEB/J 21C. This cover is simple to install and can help protect the power jack on effects pedals and other electronics using this style of DC jack.

Chrome. High-grade brass knob for potentimeters with 6mm shaft. Knurled side, with marker notch. M4 fastening screw. Diameter: 22mm. Height: 15mm.

Wirewound Resistor 5% 5W. Size: 10x9x22mm. Tinned copper leads.

Carbon Composition Resistor 5% 0,25W

Zener Diode 0,5W 11V DO35

Zener Diode 5W 14V

Power Metal Oxide Resistor 5% 2W, Umax=500V

Wirewound Resistor 10% 11W, 9x9x50mm.

Metal Film Resistor 1% 0,6W, 0207

Thick Film resistor with heat sink. Power: 100W. Tolerance: 5%. Size: 38x25x9mm.

precision machine pin, gold plated IC socket

Metal Film Resistor 1% 0,25W, 0207

Metal Film Resistor 1% 0,6W, 0207

Metal Film Resistor 1% 0,25W, 0207

Wirewound Resistor 5% 25W. Chassis mount. Dimensions (LxWxH): 27,5 x 14 x 15mm.