Search results

Microphone Cable. HICON XLR. 1m. Black cable with silver plugs.

Length: 6mm. Hexagonal spacer with threaded holes on both sides, made of insulating material. Hole dimension: M3x0,5. Outer diameter: 5,5mm. Material: polyamide, natural color.

SPRAGUE Type TE LITTL-LYTIC®10uF 150V DC. 105°C Aluminium Electrolytic Capacitor. Dimensions (DxL): 9,78 x 24,71mm

Replacement tip for use with Les Paul style switches, sliders or faders. Cream, screw on. Round drop style.

Popular skirtless synth knob. Red fluted pointer knob with silver inlay. Diameter: 16mm
6,0mm round knurled shaft, push-on.

Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 160VDC. Size: 20x13mm. Size (LxD): 22x12,5mm.

Taiway DPDT On/On toggle switch. Solder lugs. Short lever.

Tantal Radial 2,5mm

Plastic tray, made out of Polystyrol. Useful for working with components or etching PCBs. Base dimensions: 210 mm x 150 mm. Outer dimensions: 258 mm x 197 mm. Maximum temperature: 70 °C. White.

High quality, stranded, small ring. Length: 50m. Twin wire, very flexible, yellow-brown.

Vishay BC Components 021 series polarized aluminum electrolytic capacitors, non-solid electrolyte. Axial leads, cylindrical aluminum case, insulated with a blue sleeve. Dimensions (LxD): 30,5

These metal film resistors look and sound great in vintage and vintage-style builds and have been used in high-end Marshall amplifiers and other audio equipment.

These metal film resistors look and sound great in vintage and vintage-style builds and have been used in high-end Marshall amplifiers and other audio equipment.

Wirewound audio resistor, made by Vitrohm. Size (LxWxH): 38 x 9 x 9mm. Power rating: 10W. Tolerance: 10%. Wound on a fiber core with special direct contact terminals. Embedded in a cement sealed ceramic tube. Axial.

Wirewound audio resistor, made by Vitrohm. Size (LxWxH): 50 x 9 x 9mm. Power rating: 11W. Tolerance: 10%. Wound on a fiber core with special direct contact terminals. Embedded in a cement sealed ceramic tube. Axial.

Great Sounding Polypropylene Cap made by Weber. Great for decoupling, interstage audio coupling, and other general purpose use. This capacitor is modeled after the Sprague Orange Drop 716P series capacitor. Voltage rating: 630V. Size (LxDxH): 23x10,5x19mm.

FKP2 5%, LS5, 630V.
Dimensions (T x H x W): 4,5x6x7,2 mm. Polypropylene foil. Impulse resistant, negative TK-value, low dielectric absorption.

MKP 33nF 630V 10% RM10. Size (LxDxH): 13x6x12mm.

MKS02 20%, RM2.5. Size (LxDxH): 4,6x3x7,5mm.

MKT 47nF 250V 10% LS10. Size (LxDxH): 13x4x9mm.

high quality, stranded, medium spool

Push-pull 500K linear potentiometer, standard length bushing .375 inch, 3/8 inch diameter

By using two isolated outlets the Series adapter Flex gives you the sum of voltages of the two outlets used. This adapter Flex cable should be used in combination with any of CIOKS standard Flex cables if you want to power an 18V, 24V or even a 40V pedal. It gives you not only the higher voltage but also the possibility to choose the type of plug at the pedal end plus the length you need. The plug type and length is determined by the standard Flex cable used with the adapter Flex. If you’re looking for a simpler way to power an 18V pedal with a standard 5,5/2,1mm centre negative DC plug (BOSS standard) please have a look at CIOKS Stack Flex.

Constructed of the finest materials, this 6,3mm mono plug will reproduce the cleanest and clearest possible signal to your audio path. The positive or tip connection is constructed of solid nickel-plated beryllium copper rod that makes contact directly with the wire itself when inserted.

Macron MI1210CLD-R is similar to VTL5C2. 4,0 to 5,0K On, 5,0 + Meg Off. Fast On/Slow Off.

Electrolytic Axial.
Dimensions (D x L): 6x12 mm

24mm, full shaft, stereo potentiometer. Potentiometer has a 3/8 inch diameter thread.

CE manufactured FP type can caps are made in the USA to the same specifications. Twist lock / solder lugs.Dimensions (D x L): 35x63,5 mm. Size (LxD): 63,5x35mm.

Cord and spring kit for Ernie Ball volume pedals.

19mm
6,3mm axis, set screw
Taiwanese copy of the Davies #1510

Professional DC power plug with female contact, made by Lumberg. Grey. Inner diameter: 2,1mm. Straight. Rated current: 1A. Rated voltage: 12V. Cable connection type: solder.

High quality plug, 6,3mm, with metal sleeve. Mono. Right angle. Full metal construction.

Stereo jack, prewired with plastic battery snap.

This Flex is doubling the voltage, 50cm with 5.5/2.5mm centre positive DC-plug (green)

Macron MI1210CLE-R is similar to VTL5C1. 1,0-2,0K, Off resistance > 50 Megohms. Will also work as a substitute for VTL5C9 if you give it more drive current. May be used as substitute fot VTL5C6 with minimal trimming of other components.

CE manufactured Tubular Electrolytics. Dimensions (D x L): 22x71 mm. Tolerance +/-20%.

The official Duesenberg knob! Gold. Diameter: 22mm. Height: 16,5mm. Shaft hole: 6,1mm. Set Screw.

Plug, 6,3mm. Mono. Right angle. Full metal construction, secured by two screws.

Wirewound Resistor 5% 5W. Size: 10x9x22mm. Tinned copper leads.

Wirewound Resistor 10% 11W, 9x9x50mm.

Zener Diode 1,3W 10V

A current production 12AY7. Works great in vintage fender amps, and you can use it to reduce gain on your guitar amp also.

Carbon Film Resistor 5% 0,25W, 0207

Wirewound Resistor 10% 11W, 9x9x50mm.

Metal Film Resistor 1% 0,6W, 0207

precision machine pin, gold plated IC socket

Electrolytic Axial.
Dimensions (D x L): 4.5x10 mm

Metal Film Resistor 1% 0,6W, 0207

Wirewound Resistor 5% 50W, RH25