Search results

Illinois axial Capacitor 1uF 160V. Tolerance: +/- 20%. Size (DxL): 0,248 x 0,512 inch (6,30mm x 13,00mm).

High quality, audio grade polypropylene capacitor,made by JB capacitors. 0,22uF 250V . Tolerance: +/-5%, Dimensions: Ø8x15,5mm, Temperature operating range: -55 to 100°C.

The Tornado has a low resonance frequency and offers 100W RMS power while weighing only 2kg. It has a warm and round bass sound. It's tone is full and silky while staying well defined even in overdrive mode.
Speaker specification: 10 inch, 100W, 16 Ohm.

JJ TC529 100x100uF /500V radial capacitors with solder lugs. Used in many popular amps.
Dimensions (L x D): 68x35 mm.

Round cable clip with adhesive bottom. Works on any clean, flat, fat-free surface.
Diameter: 9mm.

KEMET 100nF 63V X7R 2,5mm multilayer capacitor. Tolerance: +/- 5%. Size (LxWx): 5x6,5x3,1mm.

Red knurled pointer knob. Diameter: 17mm. 6,3mm round shaft, set screw.

metal, chrome plated, reflecting outwards
without LED. For 5mm LEDs.

Total height: 15,5 mm

diameter of reflecting head-Ø: 9,8 mm

height of reflecting head: 3,5 mm

including nut and washer.

Lumberg professional 3,5mm plastic connector plug. Type: mono.

Metalized Polyester, Tubular, 630V/220VAC, Tolerance J 5%. Size (LxD): 33x24mm.

Audyn MKP Plus. Finest quality. Best Choice for passiv and active audio applications. Tolerance: 2%, non-inductive. Size (LxD): 63x35mm.

Designed with tube amplifiers in mind, this capacitor is rated at 105'C. Axial. Tolerance: +/- 20%. Size (DxL): 18,3 x 40,4mm.

Mundorf Metal Oxide Film resistors are preferred by many audio circuit designers due to their low inductance. Metal oxide films do not burn, thus withstanding heat better. They are mechanically and electrically very stable and they have a fast impulse response, making them suitable for high end audio equipment.
Power rating: 3W. Length: 17mm. Diameter: 6mm. Tolerance: 5%.

Dimensions (D x L): 13x23 mm.
The Mundorf Mcap is an audiophile capacitor. Very high quality, made of materials specifically selected for audio use.
Voltage: 250VDC.

Mundorf MCoil AirCore BL100 1,2mH (baked wire treated) massive copper round-wire 1,00mm diameter.

Mundorf MCoil AirCore BL140 1,2mH (baked wire treated) massive copper round-wire 1,4mm diameter.

Mundorf MCoil AirCore CFC12 1,2mH Foil Coil 73 x 52mm

Mundorf MCoil Pin Core Coil F50 8,2mH Ferrite Diameter 0,5mm 30 x 20mm

Mundorf MCoil Drum Core Coil H71 8,2mH Ferrite Diameter 0,71mm 35 x 25mm

Mundorf MCoil AirCore L125 1,2mH vacuum impregnated massive copper round-wire 1,25mm diameter.

Mundorf MCoil AirCore L71 1,2mH vacuum impregnated massive copper round-wire 0,71mm diameter.

Mundorf MCoil AirCore VL300 1,2mH vacuum impregnated massive copper round-wire 3,0mm diameter.

Mundorf MCoil Zero Ohm Coil VN390 8,2mH vacuum impregnated Wire Diameter 6 x 2mm 130 x 115 x 97mm

Mundorf MCap EVO 1,8uF Voltage: 450VDC. Diameter x Length: 25 x 21mm. The Mcap EVO is a lively addition to the Mundorf range with enhanced transparency and 3 dimensional stereophony.

Mundorf MLGO+16-1000. 4-pin model. Dimensions: 35x35mm.
The Mundorf Mlytic MLGO is an audio grade electrolytic capacitor. Great specifications, low ESR, low ESL. Long life, welded contacts, small size.
Voltage: 160VDC.

Mundorf MResist MREC10-1,8 Ohm resistor. Size (DxL): 10x45mm. Copper-Nickel wire with ceramic casing. Rating: 1000V AC. Power: 10W.

Mundorf Supreme EVO Oil capacitor. Capacitance: 22uF. Tolerance: ±2%. Rated voltage: 700V. Size: 66x55mm.

Mundorf MCap Supreme Silver / Oil / Gold. Uses pure silver as foil plating.
Voltage: 1000VDC.
Dimensions (D x L): 46x71 mm.

The Mundorf MCap ZN capacitor is made of tin foil.
Voltage: 630VDC.
Dimensions (D x L): 18x37 mm.

Nichicon UKA1H220MDD1TD. 105°C high quality capacitors for audio equipment. Superior sound. 22uF 50V. Diameter: 0,197 inch (5,00mm). Height: 0,492 inch (12,50mm).

Nichicon KZ Series 220uF, 50V DC. Aluminium Electrolytic Capacitors. Dimension (DxL): 16 x 25 mm.

Metalized Polyester, Tubular, 630V/220VAC, Tolerance J 5%
1uF
Dimensions (L x D): 31x13 mm

Omeg PC20BU potentiometer with 6mm plastic shaft. Shaft length: 43mm. Thread length: 7mm. Max. operating voltage: 500V DC. Power: 0,4W.

Sprague 715 Series, 600V, RM17,5
0,047uF=47nF=47000pF. Size (LxDxH): 31,8x13,2x14,2mm.

Dimensions (D x L): 5x11mm, LS 2,0mm. Panasonic FC electrolytic radial capacitor. Low impedance, long life. Widely acknowledged to be one of the best electrolytic caps available. Black blue body with gold marking.

Panasonic NHG electrolytic radial capacitor. Premium audio capacitor. Compact size, long life.
Dimensions (D x L): 6,3x11,2 mm, LS 2,5 mm.

MIL Style 2W carbon potentiometer. Made by PEC Canada. Metal housing, stainless steel shaft.
Value: 10k linear taper. Mono.

Metal Axis 4mm, Body 16mm

Piher Trimpot. PT10 horizontal, 5x10mm. Rated 0,15W, -25..70'C, 200VDC.

Piher Trimpot
PT15 horizontal, 10x12.5mm

Piher Trimpot
PT6 horizontal, 5x5mm

Gauges: 012-013-017-024w-032w-044w-054w
Electric Guitar Pure Nickel, specially designed for vintage and vintage style guitars. 7-string version. Strings have a thinner core and stronger wire. The result is a great feel and perfectly balanced tone. Strings have a ball end covered in colored silk.

Diameter: 24mm
6,0mm knurled shaft, push-on

Vishay Roederstein MKT 1822 polyester film capacitor.
Dimensions: 11,5x20,5x31,5mm. Leg spacing 27,5mm. Voltage Rating: 63 VDC/40 VAC.

Royal Ohm high quality metal oxide resistor, 2 Watt.
Size: 5,0 x 12 mm. Lead size: 0,7 x 28 mm. Rated voltage: 350 V.

Royal Ohm wirewound cermet resistor 5% 10W
Size: 10 x 9 x 49 mm. Lead size: 0,8 x 35 mm.

Screw, 4x9,5mm, Phillips Head.

Lead spacing: 6,0mm. Voltage: 500V DC. Size (LxDxH): 11,4x4,3x9,1mm.

Tin Solder spool with 100g. Diameter: 1,20mm. Tin (60 ± 1%) and lead (40 ± 1%) alloy. Flux SW26 - resin, colophony, halide activator. Flux content in the solder: 2,5%. Melting temperature approx. 190°C.