Search results

Timeless, skirtless synth knob. White fluted pointer knob with silver inlay. Diameter: 21mm
6,3mm round shaft, set screw.

Dimensions (D x L): 25 x 60 mm. The TAD GoldCap is an radial, can type electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 500V. Temperature: 85 degrees Celsius.

The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.

Taiwan made footswitch. Good quality at an excellent price.

Talema toroidal transformer, PC-mount. Primary: 2x115VAC, Secondary: 2x18V. Power rating: 10VA

223x118x84mmmm. Vintage Rangemaster style enclosure. Aluminum enclosure with silver bottom and black top. Fastened by four screws. Base color silver aluminium RAL9006. Top color is black RAL9004.

VISHAY Precision Trimpot, vertical, multiturn, cermet, 1/4W 4,7k
Dimensions: 6,8x5,0mm. Leg spacing: 2,54mm

High quality, stranded, small ring. Length: 5m. Triple wire, very flexible, green-brown-white.

Vishay BC Components MKT368 series metallized polyester film capacitor.
Dimensions (WxHxL): 4,0 x 13,0 (15,0) x 12,5mm. Leg Spacing: 10mm. Voltage Rating: 100 VDC / 63 VAC.

These metal film resistors look and sound great in vintage and vintage-style builds and have been used in high-end Marshall amplifiers and other audio equipment.

Wirewound audio resistor, made by Vitrohm. Size (LxWxH): 25 x 6,4 x 6,4mm. Power rating: 5W. Tolerance: 10%. Wound on a fiber core with special direct contact terminals. Embedded in a cement sealed ceramic tube. Axial.

Wirewound audio resistor, made by Vitrohm. Size (LxWxH): 25 x 9 x 9mm. Power rating: 8W. Tolerance: 10%. Wound on a fiber core with special direct contact terminals. Embedded in a cement sealed ceramic tube. Axial.

Vogt 1364P-Z tubular terminals. 1,0mm diameter. 10mm length (7mm top, 3mm bottom). Round lower shaft.

High Quality Ceramic Cap made by Weber. Used for bypass, decoupling, interstage audio coupling, and other general purpose use. Voltage rating: 1000V. Terminal spacing: 10mm. Height: 29mm.

Great Sounding Polypropylene Cap made by Weber. Great for decoupling, interstage audio coupling, and other general purpose use. This capacitor is modeled after the Sprague Orange Drop 716P series capacitor. Voltage rating: 630V. Size (LxDxH): 11,5x4,5x7,5mm.

FKP1 10%, LS15, 1600VDC / 650VAC.
Dimensions (T x H x W): 5x11x18 mm. Polypropylene foil, metallized on both sides. Impulse resistant, self healing.

FKS2 4700pF, 400V, Tolerance: 10%, LS 5 mm,
Dimensions (T x H x W): 2,5x6,5x7,2 mm

MKP4 0,033uF, 630 VDC/280 VAC, Tolerance: 10%, LS 10 mm,
Dimensions (D x H x W): 4x9x13 mm

MKT 33nF 250V 10% LS7,5. Size (LxDxH): 10x3x8,5mm.

High quality, stranded, small ring. Length: 10m.

100 pieces, clear see-through, zip lock

Momentary heavy duty footswitch. Normally open.

Metal switch tip. Black. Replacement tip for use with Les Paul style switches, sliders or faders. Brass, screw on. Round drop style. M3,5mm thread.

Heavy Duty SPST switch. Momentary version.

Wedge shaped enclosure.

Full shaft, mono Alpha potentiometer, with right angled PC mount vertical terminals. 16mm body diameter. W-Taper (tone control taper).

Audyn MKT polyester Cap. Tolerance: 5%. Size (LxD): 55x39mm.

CTS No-Load potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 500k log. Most commonly used in American amps and guitars. Smooth action - top quality!

GNA 3PDT On/Off/On toggle switch. Solder lugs.

Sprague 716 Series, 400V. Size (LxDxH): 31,8x14,5x24,1mm.

Industry standard for coupling, power and filters
Dimensions (D x L): 16x27mm

Battery drawer for 9V battery. Horizontal mount. Required cutout depth: 32mm.

Long Life CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 250k log. 4 contacts to wafer for best reliability. Lifecycle rating: 250000 cycles. Smooth action - top quality!

direct Marshall replacement

Wirewound Resistor 5% 5W. Size: 10x9x22mm. Tinned copper leads.

Wirewound Resistor 1% 50W, RH25

100k carbon composition resistor, 2W, 10% tolerance

Wirewound resistor with heat sink. Power: 100W. Tolerance: 5%. Size: 65,5x47,5x26mm.

Metal Film Resistor 1% 0,25W, 0207

Carbon Composition Resistor 10% 0,5W

Wirewound Resistor 5% 25W. Chassis mount. Dimensions (LxWxH): 27,5 x 14 x 15mm.

Carbon Film Resistor 5% 0,25W, 0207. Package contains 100 pieces.

Metal Film Resistor 1% 0,6W, 0207

Metal Film Resistor 1% 0,25W, 0207

Power Metal Oxide Resistor 5% 2W, Umax=500V

Carbon Film Resistor 5% 0,25W, 0207

Zener Diode 0,5W 6,2V DO35

100V, Tolerance: 10%. LS: 2,5mm

Platinum Matched, selected tubes
The Tung-Sol legacy continues with the 6L6GC STR. The ultimate in musical tone and smooth overdrive, the STR delivers the sound that established Tung-Sol as the benchmark of quality. Built to the same 'Tube Special Request' specs of leading amplifier manufacturers of the 1960s, the 6L6GC STR is a rugged and reliable power tube for use in the most demanding guitar amplifiers.