Search results

Large, blue knob with white line and set screw. For 6,3mm axis. Diameter: 27mm. Height: 15mm.

Large, Clear knob with black line and set screw. For 6,3mm axis. Diameter: 27mm. Height: 15mm.

Large, red knob with white line and set screw. For 6,3mm axis. Diameter: 27mm. Height: 15mm.

50 Hz - 16 kHz Analog Microphone Electret Condenser 2 V - 10 V Omnidirectional (-35dB +/-4dB) Solder Pads

Tap for threaded ABR-1 bridge post holes. Cut perfect 6-32 wood threads to accept posts for ABR-1 Tune-O-Matic Bridges. Install your ABR-1 the right way!

Cut perfect 6-32 wood threads to accept posts for ABR-1 Tune-O-Matic Bridges.

Overall length: 2" (50.8mm)

Threaded portion: 11/16" (17.46mm)

A 36 gauge (0.1065"/2.5mm) starter hole is required.

Pot Adaptor Washer, converts 8mm bushing pot to fit 3/8 inch pickguard hole.

Laney stereo pot. 1M log and 100K REV log. PC mount, split shaft. Used as Gain pot on the Laney LC15 and VC15 amps.

Potentiometer for Mesa Boogie, 1M log 20%, 18mm, solder lugs, D-Shaft. 3/8 inch bushing.

Potentiometer for Mesa Boogie, 25k log, solder lugs, D-Shaft. 3/8 inch bushing.

Vox replacement pot 500k log, PC mount, angled PC Pins, 16mm diameter, Split Shaft. Used on the Vox AC30CC and AC15CC Series.

Vox replacement pot 500k lin, PC mount, angled PC Pins, 16mm diameter, Split Shaft. Used on the Vox AC30CC and AC15CC Series.

Vox replacement pot 1M log, PC mount, straight PC Pins, 16mm diameter, Split Shaft. Used on the Vox AC30C2.

Vox replacement pot 100K lin, PC mount, straight PC Pins, 16mm diameter, Split Shaft. Used on the Vox AC30C2.

Vox replacement pot 500k lin, PC mount, straight PC Pins, 16mm diameter, Split Shaft. Used on the Vox AC30C2.

Vox replacement pot 100K lin Stereo, PC mount, straight PC Pins, 16mm diameter, Split Shaft. Used on the VOX AD30VT / VT30.

Potentiometer cleaning caps for use with aerosol cleaners such as DeoxIT. This is a great tool for difficult to clean potentiometers such as those on hollow body guitars and certain amp chassis. The design pushes the spray in through the bushing of the potentiometer removing the need to access the back of the potentiometer. Fits 3/8 inch (9,5mm) thread pots.

Potentiometer cleaning caps for use with aerosol cleaners such as DeoxIT. This is a great tool for difficult to clean potentiometers such as those on hollow body guitars and certain amp chassis. The design pushes the spray in through the bushing of the potentiometer removing the need to access the back of the potentiometer. Fits M8 thread pots.

Standard potentiometers may have tolerances of 20%. We match two potentiometer to be within 2% of their designated value.

Loudspeaker output transformer amplifier for general use: e.g. increase of output of small radio- CD- tape- microphone amplifiers etc.

Connector: AC supply; male; plug; 2P+PE; 230VAC; 16A; black; PIN: 3

9VAC-2,1A power supply. Cable length: 1,8m. 2,1mm plug on the end.

137x97x67mm ABS Polycarbonate enclosure, black

Switch-mode power supply, 0.6 A, high energy efficiency, complies with EU ecodesign directive. Selectable Output: DC 3/4.5/5/6/7.5/9/12 V. Contains 7 plug-in adapters. Selectable polarity by reversing the supplied adapters.

Switch-mode power supply, 1.5 A, high energy efficiency, complies with EU ecodesign directive. Selectable Output: DC 3/4.5/5/6/7.5/9/12 V. Contains 7 plug-in adapters. Selectable polarity by reversing the supplied adapters.

Switch-mode power supply,high energy efficiency, complies with EU ecodesign directive. Selectable Output Voltage: DC 5/6/7,5/9/12/13,5/15 V. Output current: 5/5/5/5/5/3,8/3,8 A. Contains 7 plug-in adapters. Selectable polarity by reversing the supplied adapters.

Solid black standby switch for Marshall JCM series and others.

Replacement power transformer built to vintage specs withg correct interleave ratios and lots of iron. Perfect upgrade for later and re-issue Marshalls. Great replacement for many other vintage British amp. High quality - classic sound.
100 Watt.

Practice drum pad stand, adjustable, 6mm mounting bolt

Practice drum pad, tunable, 10 inch

Practice pad, leg fastening

Low cost Flat pliers (30mm).

Low cost pliers (25mm).

This is a 1972 Fender Tele Deluxe/Custom pre-assembled wiring kit with four selected close tolerance 500k pots. Comes with a standard L type toggle switch for Fender reissues and originals. Use set screw knobs only.

This is a pre-assembled standard Gibson ES-335 style kit designed specifically for semi hollow body guitars. It comes stock with selected CTS vintage taper guitar potentiometers. It fits most ES-335 style copies and originals.

This is a pre-assembled premium deluxe Jazz Bass style wiring kit using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers.

This is a pre-assembled premium deluxe wiring kit for Les Paul guitars, using the best, selected parts. It comes stock with selected standard shaft CTS Premium guitar potentiometers. It will fit Les Paul style guitars with thinner tops.

This is a pre-assembled premium deluxe wiring kit for SG guitars, using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers.

This is a pre-assembled premium deluxe wiring kit for Strat style guitars with one humbucker and two singlecoils, using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers. It uses a master volume, shared tone control for the neck and middle pickups, and a tone control for the bridge pickup. 500k pots give the humbucker the correct load and we use a resistor on the single coils to give them the correct 250k load so there is no compromise mixing single coils with humbuckers.

This is a pre-assembled premium deluxe 3-way wiring kit for Tele style guitars. It uses a custom 3-way switch to give you standard Tele switching features with 1 volume and 1 tone.

This is a pre-assembled premium deluxe wiring kit for Tele Custom style guitars. It has been designed specifically with 500k pots for Telecasters with a humbucker or P-90 in the neck and a single coil in the bridge. It uses a 470k resistor in series with the single coil bridge pickup to give the single coil a 250k load, while giving the humbucker it's proper 500k load.

Low cost set that is very useful in many applications. It contains 5 Precision screwdrivers. 2x Philips (Sizes 0,5mm / 1mm), 3x Allen Screw (Sizes 1,5mm / 2,0mm / 2,5mm).

25k log push pull pot. Pre-wired for Series / Parallel Switching function.

Prewired pot set with two pots (25k log volume and 25k log tone) and a high grade Mylar 0,1uF capacitor. Knurled shaft pots.

Premium Amp Cover for Princeton Reverb (AA1164)

Low cost miniature probe. Red color. 35mm shaft length, 53mm total length.

Low cost probe. Black/grey color. With 4mm jack. Flexible 90mm shaft.
Umax=1000V, Imax=5A

Miniature probe. Wires clamp directly to the probe or may be soldered to the probe. Black color.

This is the legendary Distortion / Overdrive Pedal
Knobs for Distortion, Filter and Volume

This is the legendary Distortion / Overdrive Pedal with an added compression circuit
Knobs for Distortion, Filter and Volume