Search results

The AS3360 is a dual general purpose voltage controlled amplifier. The chip is Alfa's modern pin-for-pin compatible clone of the CEM3360 dual voltage-controlled amplifier. It can also be used to build voltage-controlled filters and waveform generators.

The ALFA AS3363 (PDIP-16) contains three VCA blocks, which are intended for use in musical synthesizer applications (VCA blocks, voltage polarizer, multiplexers, morphing, ring modulators etc.).

The ALFA AS3364 (PDIP-16) is a quad general purpose voltage linearly controlled VCA intended for such applications as voltage controlled amplifiers, filters, and waveform generators. Each VCA independently provides linear control scaling over greater than a 100 dB range. Complete with virtual ground summing inputs, wide voltage compliance current outputs, and control inputs referenced to ground, The ALFA AS3364 requires exceptionally few external components and is extremely easy to use.

AS3365 contains three VCA blocks, which are intended for use in musical synthesizer applications (VCA blocks, faders, panners, multiplexers, ring modulators etc.). VCA1 and VCA2 implement function of controlling amplification. A direct signal CVMix1 is supplied to the VCA1 control, an inverted CVMix2 signal is supplied to the VCA2 control.

AS3381 is a dual low noise voltage controlled amplifier, with linear scale, intended for applications requiring high audio performance in a small space. AS3381 contains two gain cells with extremely low noise for signal-tonoise ratio better than 100 dB, low distortion with less than 0.3% THD, and low control feedthrough for pop free performance when gain modulated. AS3381 is also extremely easy to use, requiring few external components and no external trimming to meet their excellent performance. T

The AS3397 is a complete system for the generation and processing of audio waveforms in electronic musical instruments. Intended to be driven from digitally generated square or pulse timing signals, the device includes two independent waveform converters, a mixer for voltage controlling the relative balance between the two waveform converter outputs, a dedicated four-pole low - pass voltage controlled filter with voltage controllable resonance, a VCA for allowing one converter output to frequency modulate the filter, and panoramic output VCAs.

The ALFA AS394CH (TO5-8) is a junction matched monolithic NPN transistor pair with an order of magnitude improvement in matching over conventional transistor pair.

Matched PNP transistor pair.

The ATMEGA8535-16PU is an AVR microcontroller. EEPROM: 512B. SRAM: 512B. Flash: 8kB. DIP40.

The high-performance, low-power Microchip 8-bit AVR RISC-based microcontroller combines 4KB ISP flash memory, 256-Byte EEPROM, 256B SRAM, 6 general purpose I/O lines, 32 general purpose working registers, one 8-bit timer/counter with compare modes, one 8-bit high speed timer/counter, USI, internal and external Interrupts, 4-channel 10-bit A/D converter, programmable watchdog timer with internal oscillator, three software selectable power saving modes, and debugWIRE for on-chip debugging. The device achieves a throughput of 20 MIPS at 20 MHz and operates between 2.7-5.5 volts.

Atmel 8-bit AVR Microcontroller with 2/4/8K Bytes In-System Programmable Flash. DIP8.

cello bridge 4/4, belgian model, treated wood, feet width: 92 mm

cello bridge 1/4, french model, treated wood

cello bridge 3/4, french model, treated wood

cello bridge 4/4, french model, treated wood, feet width: 96 mm

cello bridge 4/4, french model, treated wood, feet width: 90 mm

cello bridge 4/4, french model, treated wood, feet width: 94 mm

cello bridge 4/4, french model, treated wood, feet width: 92 mm

double bass bridge 3/4, belgian model, untreated wood, width: 140mm

double bass bridge 4/4, belgian model, untreated wood, width: 156mm

violin bridge 4/4, untreated wood

viola bridge 50 mm, treated wood

viola bridge 46 mm, treated wood

viola bridge 50 mm, treated wood

viola bridge 48 mm, treated wood

viola bridge 48 mm, treated wood

violin bridge 4/4, treated wood

violin bridge 1/4, treated wood

violin bridge 1/8, treated wood

violin bridge 4/4, treated wood

violin bridge 4/4, treated wood, low heart

violin bridge 4/4, treated wood

Audio Sound Foam Panel, black. Size: 200x100cm. Height: 3cm. High acoustic quality. Made in Germany.

Audyn Polypropylene foil capacitor. Voltage rating: 400V. Tolerance: &177;5%. Dimensions (DxL): 11x30,5mm.

Audyn Polypropylene foil capacitor. Voltage rating: 400V. Tolerance: &177;5%. Dimensions (DxL): 14,5x31mm.

Audyn Polypropylene foil capacitor. Voltage rating: 400V. Tolerance: &177;5%. Dimensions (DxL): 25,5x54,75mm.

Audyn Polypropylene foil capacitor. Voltage rating: 400V. Tolerance: &177;5%. Dimensions (DxL): 28,5x55mm.

Audyn Polypropylene foil capacitor. Voltage rating: 400V. Tolerance: &177;5%. Dimensions (DxL): 31x56mm.

Audyn Polypropylene foil capacitor. Voltage rating: 400V. Tolerance: &177;5%. Dimensions (DxL): 16x30,5mm.

Audyn Polypropylene foil capacitor. Voltage rating: 400V. Tolerance: &177;5%. Dimensions (DxL): 17,75x31mm.

Audyn Polypropylene foil capacitor. Voltage rating: 400V. Tolerance: &177;5%. Dimensions (DxL): 34,5x56mm.

Audyn Polypropylene foil capacitor. Voltage rating: 400V. Tolerance: &177;5%. Dimensions (DxL): 38x56mm.

Audyn Polypropylene foil capacitor. Voltage rating: 400V. Tolerance: &177;5%. Dimensions (DxL): 15,5x45mm.

Audyn Polypropylene foil capacitor. Voltage rating: 400V. Tolerance: &177;5%. Dimensions (DxL): 41,5x56mm.

Audyn Polypropylene foil capacitor. Voltage rating: 400V. Tolerance: &177;5%. Dimensions (DxL): 43,25x56mm.

Audyn Polypropylene foil capacitor. Voltage rating: 400V. Tolerance: &177;5%. Dimensions (DxL): 18x45mm.

Audyn Polypropylene foil capacitor. Voltage rating: 400V. Tolerance: &177;5%. Dimensions (DxL): 46,5x60mm.

Audyn Polypropylene foil capacitor. Voltage rating: 400V. Tolerance: &177;5%. Dimensions (DxL): 19x45mm.

Audyn Polypropylene foil capacitor. Voltage rating: 400V. Tolerance: &177;5%. Dimensions (DxL): 48,25x60mm.