Search results

Loxx Security lock set (2 pieces).The set contains two pins with screws, two top pieces and one mounting tool. For Acoustic guitars. Victorian Brass top with black bottom.

Loxx Security lock set (2 pieces).The set contains two pins with screws, two top pieces and one mounting tool. For Acoustic guitars. Vintage Copper.

Loxx Security lock set (2 pieces).The set contains two pins with screws, two top pieces and one mounting tool. For electric guitars. Chrome.

Loxx Security lock set (2 pieces).The set contains two pins with screws, two top pieces and one mounting tool. For electric guitars. Gold.

The Loxx Screw set contains three pairs of ball end screws to allow LOXX strap locks to be mounted on electric or acoustic guitars.

Loxx Security lock set (2 pieces).The set contains two pins with screws, two top pieces and one mounting tool. For electric guitars. Victorian Brass top with black bottom.

3,0V low power voltage regulator TO92
Drop<370mV/0,1A Bias 75uA

3,3V low power voltage regulator TO252AA

5,0V low power voltage regulator TO92
Drop<370mV/0,1A Bias 75uA

Reliable LR44 battery with high capacity and low self-discharge.

Replacement soldering iron 48W 24V, for soldering station LS-450 (SKU 33863) and LS-1000 (SKU 24715).

Ekulit LSM-45F Miniature speaker . 8 Ohm. Power rating: 0,1W. Diameter: 45mm. Thickness: approx. 15mm.

IC OPAMP GP 8DIP

IC OPAMP BUFFER 20MHZ 8DIP

LT1028 OpAmp ULN 75MHz 15V/us DIP8

LT1057 2x Audio OP JFET HiSpeed DIP8

LT1521CS8 Low Output Regulator by Linear Technology

LTC1799CS5 1kHz to 30MHz Resistor Set SOT-23 Oscillator

Jack for 3,5mm plugs. Type: Stereo.

The KLBM 3 is a small size, 6,3mm, mono audio jack. Very high quality, made by the German specialist company Lumberg.

String set classic, flamenco Popular Supreme, medium tension, with carbon trebles

String set classic, Concert White Silver, medium-hard tension, with carbon trebles

String set classic, Concert Dark Silver, medium-hard tension, with carbon trebles

String set classic, Concert Gold, bronze alloy, medium-hard tension, with carbon trebles

String set classic, Concert Dark Silver, hard tension, with carbon trebles

String set classic, Concert Supreme, hard tension, with carbon trebles

String set classic, Concert Supreme, extra high tension, with carbon trebles

Pearl gold backed pink paisley paper guitar body decal, 690x480mm

Silver backed pink paisley paper guitar body decal, 690x480mm

Electro Harmonix recommended accessory for their pedals. The perfect compliment to the HOG (control the 7 Expression modes), Holiest Grail (create dramatic swells and fades), Bi-Filter (remote filter sweep control), and Tube EQ (remote bandpass control for wah effects). This is a universal pedal with selectable polarity making it compatible with most keyboards and MIDI controllers.

M12 Footswitch Nut, made of Aluminum. Green. Outer diameter: 19,2mm. Thickness: 4,6mm. Suitable for M12 Foot Switches.

M12 Footswitch Nut, made of Aluminum. Red. Outer diameter: 19,2mm. Thickness: 4,6mm. Suitable for M12 Foot Switches.

M12 Footswitch Nut, made of Aluminum. Yellow. Outer diameter: 19,2mm. Thickness: 4,6mm. Suitable for M12 Foot Switches.

Replacement for Korg M5201 IC, made by JRC Japan. Also for replacement in Marshall Valvestate I, JCM900, JCM2000 etc. (M5201, M5201A oder JRC2120D)

Stainless steel M6 flat washers that are nearly identical to the chassis mounting washers used on many Marshall amps. These oversized M6 washers pair with 30mm M6 screws to attach the amplifier chassis to the head cabinet. Fits any Marshall head that uses M6 screws. Also fits #12 imperial screws. Package contains 5 pieces.

When you are using an M8 pot with a 3/8 inch hole or control plate, then this rubber ring will help to keep the pot aligned safely in the middle.

12 pieces of Single position machine pin sockets. These pressfit sockets are mounted by inserting into a PCB hole and applying some force. They stay firmly in place with tension and can then be easily soldered to the circuit board. These sockets can fit any pin spacing, such as the non-standard 3,81mm spacing of the vintage-style stripboard (vs. 2,54mm on standard stripboard). They can also jump rows so that they are not all in a line.

Hand-made in Finland premium quality bass wah pedal.

FZ-1 fuzz circuit board made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This board is a recreation of the circuit board found in Maestro FZ-1 pedals. The board is styled after the original version that can also be found in early serial Maestro FZ-1A pedals.

Maestro Style Tremolo Arm. Angled round steel arm with specially shaped, large plastic tip. Overall length 19.5cm, 6mm diameter. Colour: Nickel with semi-transparent ivory tip.

Champagne gold color hat style knob with dot indicator mark on rim. Diameter: 28mm. Height: 22mm. Hole diameter: 6,35mm.

Set of small magnetic parts trays. The set contains 2 round trays with diameter 75mm and two rectangular trays with 64x93mm size.

A slide made of magnesium and thus not only nearly free of any string noise, but also significantly lighter than other slide materials: on average 33% lighter than glass, 75% lighter than steel, 80% lighter than brass.

Mallets, pair, plastic shaft, 370 x 7 mm, 31 mm. head, soft blue yarn

Mallets, pair, plastic shaft, 370 x 7 mm, 32 mm. head, hard red yarn

Mallets, pair, plastic shaft, 330 x 5,5 mm, 19 mm. head, hard rubber

Mandolin tailpiece with cover. Nickel.

Maracas, plastic, large model, pair, orange

Gel Maracas are made from Dunlop's unique custom formulated polycarbonate composition which provides a consistent dry sound and playability. Assorted Translucent Colors: Purple, Yellow, Green, Red, Blue.