Goeldo

Chrome. With The Wrapper, the strings emerge at the bottom of the front side in the direction of the bridge. This spreads the entire string tension over a surface area of a few centimetres, so that the load in the ball end area is considerably lower. In addition, the angle of the strings to the bridge is increased, resulting in more sustain, definition and attack.

A super elegant nickel, completely handmade trapeze tailpiece based on a similar design by Signore Antonio Pioli Wandré. The solid part, rounded at the top, is attached to the body with the strap pin. It holds the lockable bracket in position to which the tailpiece unit is attached.

Goeldo HWTTC VibroBridge for Tele style guitars. Perfect in combination with classic top-mount tremolo systems like Duesenberg Diamond Deluxe, goeldo G5, Bigsby and similar. The bridge itself has all the important vintage features - i.e. steel as the base material and three brass saddles that provide the typical twang. The saddles are also flattened at the bottom to have a larger adjustment range for the height.

Gold. Elegant aluminum bridge cast in one piece. Only the saddles for B and G strings are adjustable. Very nice distinctive styling! Stud spacing 81.5mm, string spacing 52mm, radius 14 inch.

Goeldo Jazzmaster pickguard White. 3-ply (w/b/w)

Goeldo M5 Trussrod Nut. M5, 5mm hexagon brass nut for trussrods. Size: 10x7mm.

6 Left Nickel with oval metal buttons. The ClipHaus concept goes back to a tuning machine from the 60s. The rear housing, visually reminiscent of a house roof, is a clip made of spring steel, which presses the worm shaft against the gearwheel, resulting in a completely backlash-free movement. The housing, including the steel clip, is stamped from sheet steel with extreme precision.

göldo Traditional Tuner, Oval Button, 3+3. Aged finish.

göldo Traditional Tuner, Oval Button, 6L. Aged finish.

göldo Traditional Tuner, Tulip Button, 3+3. Aged finish.

DPDT on/on/on toggle switch. Chrome. 12mm hole diameter.

Goeldo Vintage Style Neck, Stratocaster shape, Unfinished, 7,25 inch . Goeldo Vintage-Spec Neck with traditional 7,25 inch fretboard radius, 21 frets and medium D shaping. Maple.

Goeldo Vintage Style Neck, Telecaster style, Unfinished, 7,25 inch . Goeldo Vintage-Spec Neck with traditional 7,25 inch fretboard radius, 21 frets and medium D shaping. Rosewood fretboard.

Goeldo Paddle-Head, 647mm Scale, 12 inch . Goeldo Paddle-Head Neck made from US Hardrock Maple featuring angled headstock.

Goeldo 'Modern Vintage' Neck, Stratocaster shape, Unfinished, 12 inch . The Goeldo 'Modern Vintage' Necks deliver great playability through a modern 12 inch fretboard radius paired with a vintage look. Rosewood fretboard.

Goeldo 'Modern Vintage' Neck, Telecaster style, Unfinished, 12 inch . The Goeldo 'Modern Vintage' Necks deliver great playability through a modern 12 inch fretboard radius paired with a vintage look. Rosewood fretboard.

Goeldo 'Modern Vintage' Neck, Stratocaster shape, Half-Paddle, Unfinished. 'Modern Vintage' Neck featuring a Half-Paddle preshaping for your own headstock designs. Rosewood fretboard.

Goeldo Vintage Style Neck, Stratocaster shape, Finished, 7,25 inch . Maple.

Goeldo Vintage Style Neck, Stratocaster shape, Unfinished, 7,25 inch . Goeldo Vintage-Spec Neck with traditional 7,25 inch fretboard radius, 21 frets and medium D shaping.

Goeldo 22-Fret Neck, Stratocaster shape, Finished, 12 inch . Extended Neck for Stratocaster shape guitars featuring 22 frets and a 12 inch fretboard radius. Rosewood.

Goeldo Vintage Style Neck, Telecaster shape, Finished, 7,25 inch . Rosewood.

Goeldo Pole Piece PP185, made of soft steel, nickel plated. Dimensions (LxD): 18 x 4,8mm.

Fillister head screws for humbucker bobbins and P90 pickups. Dimensions: 3 x 18mm. Pack of 12 pieces. Nickel.

Goeldo Side Dots. 2mm Plastic rods for creating position dots on the fingerboard's edge. Insert, cut off and sand over lightly. Cream. 4 pcs with Length: 50mm. Diameter: 2.0mm

Goeldo SilverFoil PSGFBN Bridge pickup. This singlecoil pickup sounds extremely open and brilliant with powerful output. Standard humbucker dimensions of 68.40 x 37.20 mm (without cap), open nickel silver cap with Silver foil underneath and 2-wire shielded connecting cable.

Ultra-compact, very lightweight stereo output jack for 6,3mm (1/4 inch) jack plugs. The contacts are surrounded by a plastic sleeve. Installation depth incl. connections 30mm, diameter of the sleeve 15mm.

Chrome. Steel saddles for Fender-style bridges, 10.8mm, 6 pieces.

Aged Nickel. M3 screws, width approx. 11mm, Set of 6.

The Goeldo triple stringtree for Fender-style headstocks, holding three strings instead of the usual two. It is simply screwed on in place of the original E/H stringtree. The holding pin is then moved so far that it reaches over all three high strings. So the G string can be included without having to mount a second stringtree. Gold.

Goeldo Tremolo Steel Block. Should fit all vintage replica tremolos. A good investment for Sound!

The new tremolo generation! DG tremolo system with base plate in horseshoe design and all the advantages of the goeldo DG series: smooth operation in "up & down" modes and an elegantly shaped round tremolo arm with safe, settable zero point, adjustable in all dimensions. A true alternative! Nickel/chrome. A classic vintage look in the appealing style of the Fifties: the chrome-plated base plate meets a nickel-plated tremolo system.

The Goeldo tremolo for offset guitars is not a copy of the Fender system, but can replace it 1:1 without milling, drilling and modifications. It offers all the advantages of the new Goeldo DG1 tremolo series: butter-smooth movement in 'up & down' operation and an in all dimensions settable and elegantly shaped tremolo arm with safe, adjustable zero point. A true alternative! Nickel/Chrome.

Aluminum. Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360 degrees rotatable round lever is adjustable in length, response, position and movement. It couldn't be better! Length: 102mm Width: 85mm.

Aluminum. Lefthand. Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360 degrees rotatable round lever is adjustable in length, response, position and movement. It couldn't be better! Length: 102mm Width: 85mm.

Nickel. Lefthand. Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360 degrees rotatable round lever is adjustable in length, response, position and movement. It couldn't be better! Length: 102mm Width: 85mm.

Aluminum. Inspired by the Duesenberg TDRLN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360 degrees rotatable round lever is adjustable in length, response, position and movement. It couldn't be better! Length: 176mm Width: 85mm

Downholder is mounted 1:1 in the existing mounting holes of the Stop tailpiece and allows the installation of a larger trem system without pressure roller, whereby it brings the strings with sufficient pressure to the level of the bridge. With this combination Downholder/trem system without pressure roller, any guitar with Stop tailpiece can be transformed into a well-functioning tremolo guitar without having to modify anything on the wood or hardware.

Gold. Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Chrome. Lefthand. Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Nickel. Lefthand. Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Gold. Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Goeldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Gold. Lefthand. Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Nickel. Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Aluminum. Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Aluminum. Lefthand. Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Nickel. Lefthand. Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Goeldo TMG1B Tremolo arm for göldo LT1 und TGD tremolo systems. Black. Size: (LxD): 190 x 6 mm.

Goeldo TMG1N Tremolo arm for göldo LT1 und TGD tremolo systems. Nickel. Size: (LxD): 190 x 6 mm.

Chrome. Trem system for Fender Jazzmaster, Jaguar und similar guitars. With a push in arm.