GEWA tuning key Square 5.5mm

tuning key Square 5.5mm, Guitar accessories. Please note:. Tuning pegs are conical, please do not measure the pegs at the upper square, but rather where the tuning peg goes into the instrument in question (approximately in the middle).. The matching tuning keys and tuning hammer are also conical on the inside, additionally the four inner walls are grooved in the middle, hence the seemingly confusing measurements. The measurement, for example, 5.2mm, is measured at the outermost end, without taking the grooves inside into account. Naturally, the lowest opening of the tuning key/tuning hammer is wider than the middle area.. For harp zither. Hornbeam handle, T-shaped. Suitable for peg diameter 6.25mm. . .