Duesenberg

The bass version of Duesenberg's standard tuning machine. Witha an extra-long axle an the typical 3-step buttons. Drill hole 14mm. 2+2. Nickel.

3+3. Nickel. Genious and simple Duesenberg design. Tulip style button.

Comfortable stringing and service-friendly! Drill hole 10mm. 1 left, Chrome.

3+3. Gold. Genious and simple Duesenberg design. Tulip style button.

3+3 Nickel. Like with a slotted tuner the string is just put into the shaft but then pulled all through the machine head to the backside of the headstock. Here it is cut off. Something like 1mm may look out of the housing. Just push it back softly with the tip of your finger and you can start tuning. If you don’t have a cutter you may also thread the string through the additional horizontal hole of the shaft. Genious and simple! Kidney, 3+3, 90 degrees, Drill hole 10mm.

Comfortable stringing and service-friendly! Drill hole 10mm. 1 left, Nickel.

3+3 Black. Like with a slotted tuner the string is just put into the shaft but then pulled all through the machine head to the backside of the headstock. Here it is cut off. Something like 1mm may look out of the housing. Just push it back softly with the tip of your finger and you can start tuning. If you don’t have a cutter you may also thread the string through the additional horizontal hole of the shaft. Genious and simple! Kidney, 3+3, 90 degrees, Drill hole 10mm.

6 Left Nickel with oval cream plastic buttons. The ClipHaus concept goes back to a tuning machine from the 60s. The rear housing, visually reminiscent of a house roof, is a clip made of spring steel, which presses the worm shaft against the gearwheel, resulting in a completely backlash-free movement. The housing, including the steel clip, is stamped from sheet steel with extreme precision.

6 right. Gold. Genious and simple Duesenberg Z-Tuner design. Junior style buttons.

6 left. Gold. Genious and simple Duesenberg Z-Tuner design. Junior style buttons.

3+3 Gold. Like with a slotted tuner the string is just put into the shaft but then pulled all through the machine head to the backside of the headstock. Here it is cut off. Something like 1mm may look out of the housing. Just push it back softly with the tip of your finger and you can start tuning. If you don’t have a cutter you may also thread the string through the additional horizontal hole of the shaft. Genious and simple! Kidney, 3+3, 90 degrees, Drill hole 10mm.

3+3 Gold. The gear wheel has an elegant 3-step cover and the worm shaft is black anodized. As with all other Duesenberg Z-Tuners, the string is inserted into the shaft from above so that the sharp-edged end of the string cannot cause any damage or pain. 10mm bore hole.

Comfortable stringing and service-friendly! Drill hole 10mm. 1 left, Gold.