Banzai

High quality white chicken head knobs that resemble the style of knob found on the Zonk Machine II and Shatterbox fuzz pedals. The Zonk chicken head knob has a contoured center band with a textured finish. The outer dome has a shiny finish offering a visual contrast.

Deluxe chopstick, made of white plastic with colorful lettering. If using a chopstick as a diagnosis tool then do it in style with this nice work of art. The price is per piece so if you want to work on an amp and have some sushi on the side then you'll need to order two.

Chrome plated metal knobs similar to those found on 1960s Vox instruments and amplifiers. These solid metal knobs feature a diamond knurled grip on the wider top section and a skirt with an infilled red dot indicator. 6,3mm axis diameter. Set-screw. Blank unlabelled knob.

Chrome plated metal knobs similar to those found on 1960s Vox instruments and amplifiers. These solid metal knobs feature a diamond knurled grip on the wider top section and a skirt with an infilled red dot indicator. 6,3mm axis diameter. Set-screw. 'Volume' labelling on top of the knob.

Chassis mount jack. Nickel plated contacts. Red.

Plastic with nickel contacts. Black.

Plastic with nickel contacts. Black.

Metal, with gold plated contacts. Red rings.

Metal, nickel plated. PCB mount.

PCB mount high quality Cinch/RCA jack.

Plastic with nickel contacts. Red.

Pre-drilled classic round fuzz pedal enclosure made of sandcast aluminum. This large enclosure is a close match to the original enclosures used on the vintage fuzz effect. It features two holes for potentiometers, two top mounted holes for Cliff style jacks, and a footswitch hole. Comes with two pcb mounting screws, the bottom plate and its mounting screw. Please note that these sandcast enclosures, much like the originals, may feature some amount of imperfections such as pitting.

Cliff Plastic nut for amp style jacks. Black.

This board is for a CMOS fuzz topology popularized by Craig Anderton’s Tube Sound Fuzz from the mid-70s. The board uses a new design with old-school traces on phenolic substrate for an era-appropriate look. Phenolic boards are found in many vintage electronics before the use of fiberglass became common.

Teflon insulated 75 Ohm, MiL-C-17 Type, RG 187 wire. Outer diameter: 2,69mm. Conductor fiameter: 1,6mm. Price per meter, enter how many meters you want.

Cocoa piping, large. Height: 12,7mm. Bead diameter: 4,8mm. Price per meter. Enter how many meters you want.

Combination Nut M3 Galvanized Steel 8, Toothed Lock Washer.

120mm combination pliers with cutting edge for copper wire (0,2-1,5m). Made in Germany.

Compressed Air can 520ml, for cleaning or removing dust.

Thermally Conductive Gap Pad 1 W/m-K. Gray. Size: 10x10cm. Thickness: 0,5mm. Easily cuts to the desired size.

Professional grade thermally conductive gap pad 1 W/m-K. Gray. Size: TO220 size cutout with hole. 19,05x12,7mm. Thickness: 0,23mm.

The 360-piece set consists of 120 solder connectors and 240 heat-shrink tubing. The shrink ratio is 2:1. This complete set allows you to connect cables and protect them against loosening, accidental disconnection, and external influences.

Magnetic Contour Gauge 260mm. This tool serves as practical help for all contour work. With the gauge you can quickly and easily copy contours onto your workpiece. Slats working width: 260mm. Working length: 45mm. 4 holding magnets.

Control Plate for Jazz Bass

Control Plate for Precision Bass

Diameter: 14mm, height: 17mm. Cream knob with silver aluminum inlay on top.
6,3mm round shaft, set screw.

Diameter: 14mm, height: 17mm. Red knob with silver aluminum inlay on top.
6,3mm round shaft, set screw.

Diameter: 14mm, height: 17mm. Yellow knob with silver aluminum inlay on top.
6,3mm round shaft, set screw.

6L6GC to EL34 Conversion Kit. This kit allows you to change the two 6L6 tubes in your vintage Fender amp to EL34 tubes instead.

Dome knob, copper color. 6mm axis. Push-on. Diameter: 18mm. Height: 18,5mm.

Copper wire, enamelled. Diameter: 0,1mm. Length: 140m.

Copper wire, enamelled. Diameter: 0,4mm. Length: 23m.

Copper wire, enamelled. Diameter: 0,7mm. Length: 12m.

Copper wire, enamelled. Diameter: 1,0mm. Length: 6m.

Value Pack with 150 pieces of metal cotter pins. Made of #70 steel.

Countersunk Washer. Black. Inner diameter: 6,3mm (1/4 inch).

Countersunk finishing Washer, stainless steel. Diameter: inner: 4mm, outer: 11mm, height: 2,5mm. Made from one piece of full metal stainless steel.

#4 finishing washers (2.84 mm). Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance.

Brown Country and Western style Tolex covering. 137 cm wide. Sold per yard (91,4 cm), please specify length.

Cream piping with 3,2mm (2/16 inch) diameter bead with mounting flange (7 x 1,6mm).
Price per meter.

Cream Bronco Tolex covering. Vintage Fender smooth style. 106,6 cm wide. Sold per yard (91,4 cm), please specify length.

High quality clip. Black color. Alligator clip with 4mm jack. Jaw open width: 12mm. Current rating: 10A.

Crown nut M12, SW19, stainless steel.

Diameter: 13,5mm. Blue color. Made of ABS.
6,3mm round shaft, set-screw.

Diameter: 13,5mm. Green color. Made of ABS.
6,3mm round shaft, set-screw.

Diameter: 13,5mm. White color. Made of ABS.
6,3mm round shaft, set-screw.

Diameter: 13,5mm. White color. Made of ABS.
6,3mm round shaft, set-screw.

Cupcake push-on volume and tone knobs. 25mm diameter and 16mm height. Perfect for that retro effect. Set contains one Volume and one Tone knob. Ivory color with silver lettering.

Cutter knife with 18mm blade. Sturdy cutter knife for households, hobby or workshops. With breakable, lockable blade.