Banzai

Black guitar control knob with silver inlay and black lettering 'Tone'. Silver numbering 0-10 around the outer part of the knob. Push-on, for knurled split shaft pots, 6mm.

Black guitar control knob with gold inlay and black lettering 'Volume'. Gold numbering 0-10 around the outer part of the knob. Push-on, for knurled split shaft pots, 6mm.

Black 'Witch Hat' guitar control knob with silver inlay and black lettering 'Volume'. Silver numbering 0-10 around the outer part of the knob. Push-on, for 6mm split shaft pots.

Set with items needed to build a Volume switcher box.

Silver Aluminum knob. For 6,3mm round shaft. Set-screw. Diameter: 19mm. Height: 19mm. Numbered 0-10.

Replacement bottom plate for E1 wah pedal shells.

Black customized wahwah enclosureBuild a custom Wah, Volume, or Control pedal! Includes rack gear, bottom plate, rubber feet, mounting hardware and screws. Custom drilled to fit Neutrik jacks, enlarged DC jack hole to mount Lumberg jacks and similar. Slightly enlarged switch hole to allow easier mounting of the footswitch (very welcome detail loved by our high volume production clients)

Unpainted Economy wahwah enclosure. Build a custom Wah, Volume, or Control pedal! Includes rack gear, bottom plate, rubber feet, mounting hardware and screws.

Heavy duty deluxe warehouse shelf with up to 5 tiers. Easy boltless assembly. Load capacity: 175kg per tier. Size (HxWxD): 180x90x40cm. Powdercoated Grey. Quantity discounts available if you buy a full pallet of these.

Make potentially harmful places better visible with this adhesive red/white tape. Highly reflective surface. Ideal für workplaces, loading areas and stages. Adhesive back. Width: 50mm. Length: 33m.

thickness 0,5mm

heavy duty look for your pedal
custom made for Banzai

Black Nylon flat washer for use with foot switches. This washer is M12 size and fits both metric (M12) and imperial (15/32) bushings for compatibility with the vast majority of foot switches.

Custom made for Banzai.
Can be used with footswitches and other devices
12mm inner diameter. 17mm outer diameter. Thickness: 1,5mm.

Custom made for Banzai.
Can be used with footswitches and other devices
12mm inner diameter. 18mm outer diameter. Thickness: 0,1mm.

custom made for Banzai
can be used with footswitches and other devices

for footswitches. Inner diameter: 12mm, outer diameter: 17,5mm, thickness: 1,0mm.

Black color. For footswitches. Inner diameter: 12mm, outer diameter: 17,5mm, thickness: 1,2mm.

Modern closed tuners sometimes look a little bulky on classic headstocks, which is mainly due to the 15mm washers. Our vintage washers, on the other hand, have a more dainty appearance similar to the drive-in sleeves of old open tuners. Diameter: inside 8mm, outside 12mm. Set contains 6 pieces.

Chassis ground washer for 15/32 inch hardware such as footswitches, full-size Carling toggles, and Switchcraft toggles. These grounding lug washers have a 0.48 inch inner diameter and also work with M12 hardware. The 1/4 inch tab can be used with quick disconnects or can be directly soldered to wire.

Indicator washer, nickel. 45 degrees angled indicator tip. Commonly used with potentiometers as indicator mark. Makes finding the correct settings easy.

Indicator washer, nickel. Commonly used with potentiometers as indicator mark. Makes finding the correct settings easy.

M10 toothed lock washer. Commonly used with M10 jacks or potentiometers.

High quality nylon M3 flat washers. Set contains 10 pieces. These durable washers fit perfectly on M3 threaded screws. The small outside diameter provides a clean look beneath the head of the screw.

M6 washer, gold. Commonly used with toggle switches.

Washer M8 Nickel. Outside diameter: 12,0mm. Inside diameter: 8,2mm.

M9,5 washer, nickel. Commonly used with M9,5 and 3/8 inch potentiometers.

M9 washer, gold. Commonly used with audio jacks.

M9 washer, satin chrome. Commonly used with audio jacks.

thickness 1,5mm

High quality nylon M3 flat washers. Set contains 10 pieces. These durable washers fit perfectly on M3 threaded screws. The small outside diameter provides a clean look beneath the head of the screw.

Water based white glue. For small or large bonding areas of wood, foam, paper or leather. Washable. Medium bottle, 100g.

Beautiful classic design
28mm, set screw
6,3mm round shaft

White piping, thin. Bead diameter: 2,4mm. No lip. Price per meter. Enter how many meters you want.

Wide dress nut for use with full size toggle switches and footswitches. These dress nuts feature a wide chamfered edge that pairs nicely with smaller dress nuts such as SKU 59828, 59830 or 61255. These nuts are threaded through and fit any 15/32-32UNS bushing such as Carling footswitches and full sized toggles.

Silver aluminum knob with index notch on the top. Knurled sides for better grip. Diameter: 16mm. Height: 16mm.
6,4mm round shaft. Set-screw.

Black wind screen. Fits Shure SM 57 and others.

Beautiful american style wing nut M3.

High quality, stranded, small ring. Extra-thin. Length: 10m. Black

High quality, stranded, small ring. Extra-thin. Length: 10m. Brown

High quality, stranded, small ring. Extra-thin. Length: 10m. Grey

High quality, stranded, small ring. Extra-thin. Length: 10m. Red

High quality, stranded, small ring. Extra-thin. Length: 10m. White

Wire brush, made of wire and wood.

Solid core copper wire, 0,5mm diameter (0,2mm² cross-sectional area). Insulated. Length: 100m. Red.

125mm wire stripper with adjusting screw. Made in Germany.

Coax wire stripper. Strips coax cables of 4,8...7,5mm diameter.

10 spools stranded copper wire 0,04mm2. Length of each spool is 10mm. COlors: Black, red, blue, yellow, green, white, purple, orange, brown and grey.

The SC-Multicolor value package contains 9 rings of solid core wire (length of each ring: 10m. Diameter: 0,5mm. Cross-sectional area: 0,2mm². The wire is insulated. The following colors are included: red, black, blue, yellow, green, white, orange, grey, brown.