Banzai

RCA plug, male, nickel plated body with red indicator ring.

Female to Male RCA adaptor plug. Right Angle. Gold with black indicator ring.

Phenolic skirted knobs with a set screw and brass insert. These unique knobs closely match the RCA style of knobs used on vintage test equipment, radios, studio consoles and other equipment. They are sometimes referred to as fester knobs. The RCA style knobs feature an inlay indicator line. Diameter: 22mm. Black.

Phenolic skirted knobs with a set screw and brass insert. These unique knobs closely match the RCA style of knobs used on vintage test equipment, radios, studio consoles and other equipment. They are sometimes referred to as fester knobs. The RCA style knobs feature an inlay indicator line. Diameter: 33mm. Black.

Phenolic skirted knobs with a set screw and brass insert. These unique knobs closely match the RCA style of knobs used on vintage test equipment, radios, studio consoles and other equipment. They are sometimes referred to as fester knobs. The RCA style knobs feature an inlay indicator line. Diameter: 33mm. Brown.

Phenolic skirted knobs with a set screw and brass insert. These unique knobs closely match the RCA style of knobs used on vintage test equipment, radios, studio consoles and other equipment. They are sometimes referred to as fester knobs. The RCA style knobs feature an inlay indicator line. Diameter: 33mm. Green.

Phenolic skirted knobs with a set screw and brass insert. These unique knobs closely match the RCA style of knobs used on vintage test equipment, radios, studio consoles and other equipment. They are sometimes referred to as fester knobs. The RCA style knobs feature an inlay indicator line. Diameter: 33mm. White.

2 x 2 Horizontal PCB Mount RCA socket. Mounting depth 24mm.

Steel Backplate for Deluxe Reverb AB763. Dimensions: 334mm x 43mm. Material: Aluminum 1,0mm.

Rear Panel for 18 Watt Plexi.

Rear Panel Plexi 45W

Rear Panel Sticker, Blackface / Silverface Vibrochamp Style.

Rear plate for Blackface Twin Reverb AB763. Made of aluminum 1,0mm.

Recess Dish 178x127mm. Plain. Perfect to siot tour labels. Zinc finish. Made of 1,2mm (18 gauge) steel. Dish Depth: 16mm (5/8 inch).

Recessed Bar Handle. Made of 0,9mm steel. 10 mounting holes. Black.

Recessed Bar Handle. Made of 0,9mm steel. 6 mounting holes. Black.

Double sprung, rivet protected, recessed handle with 8mm bail and 17mm grip. Made of 1,2mm (18 gauge) steel. Zinc.

Double sprung, rivet protected, recessed handle with 8mm bail and 17mm grip. Made of 1,2mm (18 gauge) steel.

Double sprung, rivet protected, recessed handle with extended grip. Made of 1,2mm (18 gauge) steel. Zinc. Shallow depth 10mm.

Record silver polish for musical instruments. Bottle contains 125ml.

Red British Garnet Bronco tolex covering.

Gold Reflector knob with silver reflector and black lettering 'TONE'. Push-on, for knurled split shaft pots, 6mm.

Gold Reflector knob with silver reflector and black lettering 'VOLUME'. Push-on, for knurled split shaft pots, 6mm.

Relic pickguard screw set for strat style guitars. This set contains 8 pickguard screws as needed in vintage pickguards. It also contains 6 back plate screws, 2 jack cover screws, 2 switch screws and 6 pickup screws.

Metal film resistor 0,25W value pack, Package contains 100 pieces each of: 1,2k, 1,5k, 1,8k, 2,2k, 2,7k, 3,3k, 3,9k, 4,7k, 5,6k, 6,8k, 8,2k, 10k.

Metal film resistor 0,25W value pack. Package contains 100 pieces each of: 120k, 150k, 180k, 220k, 270k, 330k, 390k, 470k, 560k, 680k, 820k, 1M.

Approx. 200 pieces of resistors. Includes resistor color code table.

Retro Tip for Tremolo Arms. 6mm, black. Tips for tremolo arms made in Germany in the 60s and 70s. This is not cheap injection plastic (like in these years) but made on the turning bench from a kind of bakelite, then sanded and polished to high gloss. Should be put onto the arm with some glue or super glue! 11x41mm.

Retro Tip for Tremolo Arms. 6mm, cream. Tips for tremolo arms made in Germany in the 60s and 70s. This is not cheap injection plastic (like in these years) but made on the turning bench from a kind of bakelite, then sanded and polished to high gloss. Should be put onto the arm with some glue or super glue! 14x34mm.

Handmade black tolex bags for Mod Mini reverb tanks. These bags can help isolate tanks housed in cabinets from external vibrations allowing the springs to fully vibrate resulting in fuller and richer reverberations. The bags for Mod® Mini tanks fit all MN-8 (5.875 inch ) type reverb tanks.

Package of 4 grommets for reverb tanks. Fit 3/8 inch (10mm) mount hole diameter.

Gray knob with red index mark. Diameter: 24mm. Height: 16mm. Push-On.

16mm diameter, 14,5mm height. Cream. Recessed strip with white indicator dot on top.
Set screw. For 6mm/6,35mm shafts.

16mm diameter, 14,5mm height. Red. Recessed strip with white indicator dot on top.
Set screw. For 6mm/6,35mm shafts.

20mm diameter, 16mm height. Black. Recessed strip with white indicator dot on top.
Set screw. For 6mm/6,35mm shafts.

35mm diameter, 18mm height. Black. Recessed strip with white indicator dot on top.
Set screw. For 6mm/6,35mm shafts.

Three conductor Flexstrip ribbons cable. Length: 5,08cm. These ribbons feature a nomex insulator so there are no melting issues when soldering. Unlike typical ribbon cables, the wires are designed to distribute the stress of the bend and vibrations throughout the entire cable rather than directly on the solder joints.

Four conductor Flexstrip ribbons cable. Length: 5,08cm. These ribbons feature a nomex insulator so there are no melting issues when soldering. Unlike typical ribbon cables, the wires are designed to distribute the stress of the bend and vibrations throughout the entire cable rather than directly on the solder joints.

Six conductor Flexstrip ribbons cable. Length: 5,08cm. These ribbons feature a nomex insulator so there are no melting issues when soldering. Unlike typical ribbon cables, the wires are designed to distribute the stress of the bend and vibrations throughout the entire cable rather than directly on the solder joints.

Eight conductor Flexstrip ribbons cable. Length: 5,08cm. These ribbons feature a nomex insulator so there are no melting issues when soldering. Unlike typical ribbon cables, the wires are designed to distribute the stress of the bend and vibrations throughout the entire cable rather than directly on the solder joints.

Set with 2 pieces. Black knobs with silver inlay. One knob has lettering 'TREBLE VOLUME', the other one has lettering 'BASS VOLUME'. 6,0mm axis, push-on.

Decorative ring nut M6.

Rocker switch, DPST On-Off, with white labeling I/O. Snap-in mount (panel cutout 30x22mm). Rating 18A @ 250VAC, 20A @ 125VAC. Quick-connect solder lugs.

Standby Switch for Marshall Studio Series. 3 positions (Hi-STBY-LOW). Esed by Marshall in their Studio Classic line: SC20C, SC20H and the Studio Jubilee series: 2525H, 2525C.

Red Rocker Power Switch, Marshall JCM series, 5-Pins. Primarily used on the Marshall JCM800 series (2203, does NOT fit Reissue model), late Marshall JMP series, Silver Jubilee Serie (2555, 2554, Does not fit Reissue: 2555X), Orange Amps like the Super Bass, with 5 Pins. Perfect replacement for the original 'Arrow' switch with same shape and function. Connections are mirrored compared to the original (see pictures for wiring instructions).

Rocker Switch DPDT with Blue actuator. On-On switching. Rating: 6A 125V. Hole distance: 1,125 inch (28,58mm). Great replacement for the switches often found on vintage amplifiers and on the Minimoog.

Rocker Switch DPDT with White actuator. On-On switching. Rating: 6A 125V. Hole distance: 1,125 inch (28,58mm). Great replacement for the switches often found on vintage amplifiers and on the Minimoog.

Cherry SRB22A2DBBNN Black rocker switch with white On-Off lettering. 10A 250VAC. Silver plated contacts.

Peavey style SPST rocker switch with 0,187 inch (0,475mm) tabs. Made by Carling. Matte Finish. Black base/actuator.