Banzai

Nickel. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.

Finishing Washer, stainless steel. Inner diameter: 5mm. Outer diameter: 14mm. Height 3mm.

130mm flat nose pliers with plain jaws.

Flat Bigsby style tremolo arm. Length 16.5mm. Incl. spring washer and self-locking nut. Chrome.

Extra grippy. Black plated brass. The grip of the distinctive knurling and the unusual mushroom shape make the knob particularly suitable for push/pull pots. Measurements: 21.6/18.7mm. Diameter: 15mm.

Extra grippy. Gold plated brass. The grip of the distinctive knurling and the unusual mushroom shape make the knob particularly suitable for push/pull pots. Measurements: 21.6/18.7mm. Diameter: 15mm.

Extra light and extra grippy. Bare aluminum. The almost ridiculous weight of 7.7g is due to the aluminum material used, the grip of the distinctive knurling and the unusual mushroom shape. This somewhat unusual shape also makes the knob particularly suitable for push/pull pots.

Mesa Boogie knob, 22mm diameter, D-shaft. White lettering: 0-10.

Mesa Boogie Push-on knob for EQ sliders. Used for example on the Studio 22, Caliber and Studio Preamp.

Adhesive silver foil scale with black figures. Diameter: 45mm. Hole diameter: 10mm.
Applicable on metal, plastic, wood or other smooth surfaces. Scale Range 0 to 100. Scale spread on 270 degrees.

Black Metal Footrest. Adjustable. Inclined footrest. 4-way height adjustable by means of a grid.

Spare plastic bottom part for the Footswitch box VT-RND-DOUBLE.

Two button, vintage style footswitch box for Channel-Switching and Reverb, special model for 1980s Fender amps of the 'Paul Rivera' designed models:
Fender Twin Reverb 2
Fender Super Champ
Fender Concert
Fender Princeton Reverb 2
Fender Deluxe Reverb 2
Fender 75
Fender 140

With switching electronics + LEDs
Connectors: 2 Stereo phone plugs 6.3mm / 1/4 inch.

Spare plastic bottom part for the Footswitch box VT-RND-SINGLE.

One Button, ¼ inch plug. Cable length: 4,8m.

Three buttons footswitch box. DIN Connector Jack 5-pin. With 3mm indicator LEDs. Latching footswitches.

Two Button, ¼ inch plug. With indicator LED. Cable length: 4,8m.

Footswitch Pedal FS-1

Heavy Duty Footswitch topper, made of Aluminum. Diameter: 23mm. Height: 10mm. Double Set-screw.

Heavy Duty Footswitch topper, made of Aluminum. Diameter: 23mm. Height: 10mm. Double Set-screw.

Heavy Duty Footswitch topper, made of Aluminum. Diameter: 23mm. Height: 10mm. Double Set-screw.

Forked turret for 3mm boards. Total length: 13mm. Width (bottom): 2,5mm. Width (forks): 5mm.

Tubular forked terminals. For use with 2mm boards.

Convenient and practical. Made of aluminum alloy, heavy and durable. Radius adjustable via thumbwheel. Size: 21,6x8,5cm. Get a perfect bend on enough wire for a whole guitar in just seconds. Not for stainless steel frets.

Dual cutting edge file, medium profile, used for the polishing and maintenance of guitar frets. Soft red handle with an excellent grip even when it has been exposed to moisture or fluids. Length: 18cm.

Fret crowning file for standard frets. Length: 19,5cm. Width: 16mm. Thickness: 4mm. Made in Japan.

Fret Cutter, used to trim the ends of new fret wire close to the fingerboard without leaving marks. Made in Japan. Dimensions: 190mm. 27mm jaw width.

Fret File blade, used to work on frets in the fretboard. May also be used to improve old, worn out frets. Size: 160 x 28mm.

Fret File, narrow profile, approx. 1mm. For example used for mandolin, ukulele or banjo frets.

Acrylic body with high carbon fret blades. Two degrees: 35° and 90°. Size: 150 x 60 x30mm. The 90-degree right-angle file is for initial smoothing and flush-filing. THe 35-degree angled bevel file is for perfectly beveling fret ends before final dressing.

Fret press caul. Perfect for converting your drill press or arbor press into a fret press. 3/8 inch (9,5mm) shank. Includes 2,5 mm hex key.

Brass Fret Press inserts. 2,5 inch width. Radius: 12 inch .

Brass Fret Press inserts. 2,5 inch width. Radius: 16 inch .

Brass Fret Press inserts. 2,5 inch width. Radius: 6 inch .

Brass Fret Press inserts. 2,5 inch width. Radius: 9,5 inch .

A specialized tool for cleanly pulling out frets. The narrow jaws are designed specifically to allow for a clean grip on frets.

Vintage style AA battery orientation label. This label matches the size and style of those found in original FZ-1 fuzz pedals. It is a great option for replica style builds or other vintage inspired effects.

Fuse Holder - 3AG-Type, Low Profile, Slotted, Spade Lug

Protective cap for the fuse holder PTF/76. Temperature rating: -30..85°C.

Value Pack: 160 pieces. 5x20mm fast-blo fuses. Ships in plastic box 135x85mm. 20 pieces each of the following values: 0,5-1-2-3-4-5-8-10A.

This black color PCB is a recreation of the iss. 1 circuit board found in classic Fuzz Face pedals. When drawing the layout, multiple originals were closely referenced to ensure a proper match and fit. The copper traces are gold plated providing protection from corrosion indefinitely. This classic board fits the mounting holes on both original and reproduction Fuzz Face enclosures.

Iss. 1 fuzz PCB made with a phenolic substrate for an even closer match to the vintage production boards. This PCB is a recreation of the iss. 1 circuit board found in classic Fuzz Face pedals.

Iss. 2 fuzz PCB made with a phenolic substrate for an even closer match to the vintage production boards. This PCB is a recreation of the iss. 2 circuit board found in classic Fuzz Face pedals.

Diameter: 21mm, height: 15,2mm.
6,3mm round shaft, set screw
Silver inlay.

Vulcanized Cellulose Fiber for all electrical insulation. Gray insulating paper. 2,5mm thick. Used in switches, under terminals, in transformers, etc .where mechanical strength is required. Its qualities of toughness, flexibility, and edge-tearing resistance combined with high dielectric strength and ready absorption of insulating varnish have led to its predominant use as an improved motor slot call insulation. Dielectric strength 3000 volts. 25,4cm wide roll contains 1548cm².

Length 12mm, Diameter 4mm. NOS, produced in the 1980s.

PNP Germanium Transistor MP41. hFE approx. 30-60. NOS, made in the 1970s and 1980s. Length 8mm, Diameter 11,7mm.

Metal glide foot, made of 1,1mm steel, zinc plated. Mounting hole diameter: 5mm.

Gold Aluminum knob with indicator notch on top. Diameter: 15mm. Height: 15mm. For 6mm shaft. Set-screw.