Studio Accessories

Reduces unwanted noise. Has a clamp to fix the device to mic stands.

Midi Clip black (holds up to 100 kg) for fastening molton, canvas, covers etc. This clip is particularly suited for fastening materials that do not have eyelets or other fastening possibilities. The material is simply clamped down by the clip, so that the material itself does not get damaged.

Mini Clip black for fastening molton, canvas, covers etc. This clip is particularly suited for fastening materials that do not have eyelets or other fastening possibilities. The material is simply clamped down by the clip, so that the material itself does not get damaged.

Large, professional popkiller for modern studios, made by Koenig & Meyer. Reduces unwanted noise. Has a clamp to fix the device to mic stands of up to 23mm diameter. Double nylon shield with plastic frame and 200mm diameter. Adjustable neck with 8mm diameter and 330mm length.

This is the ultimate front end for your recording channel. Play your guitar or bass without having to carry around a bulky amplifier. Just stick a BigAmp in your pocket and you are always ready to play. The BigAmp is a small, high-end D.I. amplifier with a BIG sound. Mady by Triton Audio.

This is a phantom powered, high quality preamp preceding the microphone cable that improves the sound quality of a dynamic microphone. Boost your Microphone signal. Attach FetHead on to a balanced microphone cable and plug it in a dynamic microphone, switch on phantom power and enjoy the FetHeads natural open sound! Made by Triton Audio.

The FetHead Filter is a Fethead version with a built-in 6dB/octave high pass filter with a corner frequency of 220Hz (other cutoff frequencies available on request). It is specially designed for microphones which exhibit an excessive proximity effect / low frequency response, like long motor ribbon microphones. The components which make up the filter are not directly in the signal path but are applied to the components which set the gain of FetHead Filters amplifier, thus making it frequency dependant. This way the sonic character which makes a FetHead attractive to the ear is preserved.

The FetHead Phantom is a FetHead version which allows phantom power to reach the microphone. It was developed after several requests from different audio engineers to build a FetHead for condenser microphones with low output. We tested FetHead Phantom on a broad range of condenser microphones and are very happy with the results. It works well with electret microphones like the countryman or an AKG C1000. These are microphones which consume very little power, FetHead Phantom also works great on real condenser microphones like a U87 or even with an Oktava MK319 which consumes a hefty 8mA!

Set containing 4 pieces of Triton Audio NeoLev. Place them under your near field monitors, record player or any other device and isolate your equipment from feedback. Placed under near-field monitors, home stereo speakers, turntables etc, they eliminate acoustic feedback and mechanical distortion to bring out the full potential of your gear. Cancellation of contact induced resonance is very effective as forces perpendicular to the device are stopped from being transferred. NeoLev's are adjustable to ensure perfect levelling.