Power Connectors

Arcas Extension Cord, white. Length: 10m. Maximum power load: 3680W, 16A, 230V AC.

3-prong, 18AWG (1,0mm²). Blank ends. Diameter: 6,4mm. Length: 3m.

3-prong, 18AWG (1,0mm²). Typ G, BS 1363 plug to IEC C13 plug. Diameter: 6,4mm. Length: 3m.

3-prong, 18AWG (1,0mm²). Typ NEMA 5-15 (B) plug to IEC C13 plug. Diameter: 6,4mm. Length: 3m.

Male receptable for power cables. Chassis mount. Hole spacing La=36mm. Width of terminals on the back: 6,3mm.

Male receptable for power cables. Chassis mount, Snap-In.

Male receptable for power cables with inbuilt fuse holder (for 5x20mm fuses). Chassis mount. Hole spacing La=36mm. 4,8mm type tabs.

Male receptable for power cables with inbuilt fuse holder (for 5x20mm fuses). Chassis mount. Hole spacing La=39mm. For 4,8mm type plugs.

Female Plug, angled.

Female Plug, angled.

IEC male receptacle for PWI cables. Fits directly into most Marshall type amps and others.

Power cord, European plug DIN jack, black, 2,0m

Power cord with angled rubber plug, 2,5m, black.

Power cord with rubber plug, 2,5m, black.

Power cord with UK type plug, 2m, black.

Power cord: 12 foot 3 prong US-type to IEC female type (Extra long Marshall type)

Power cord: 7 foot 3 prong US-type to IEC female type(Marshall type)

Power cord: 8 foot 3 prong US-type to cut end type (General replacement)

Power Inlet with fuse holder for Engl amps and others.

Y-Power cord 5m. 1x in and 2xC13 out. Black.

Locking female cable connector, screw terminals. The powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.