Other Pots

10M reverse log potentiometer. 24mm body diameter. 6,3mm full shaft.

Full Shaft, Mono Potentiometer, with pins and long shaft. Shaft length: 35mm.

Full Shaft, Mono Potentiometer, with pins and long shaft. Shaft length: 35mm.

Split Shaft, Mono Potentiometer, with pins and split shaft. The pot has a normally open switch, positive click. Rotary switch, switching at 0 Ohm.

Split Shaft, Mono Potentiometer, with pins and split shaft. The pot has a normally open switch, positive click. Rotary switch, switching at 0 Ohm.

350K Audio tapped at 70K from the CCW end.

Allparts EP 0385-000 Blend/Balance potentiometer with metal axis and center click. Includes nut and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 250k log.

Allparts EP 0386-000 Blend/Balance potentiometer with metal axis and center click. Includes nut and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 500k lin. Most commonly used in American amps and guitars. Smooth action - top quality!

Allparts EP 0185-000 mini potentiometer with metal axis. Includes nut and washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 250k log.

Allparts EP 0186-000 mini potentiometer with metal axis. Includes nut and washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 500k log. Most commonly used in American amps and guitars. Smooth action - top quality!

Allparts EP 0285-000 push / pull potentiometer with metal axis. Includes nut and washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 250k log.

Allparts EP 0286-000 push / pull potentiometer with metal axis. Includes nut and washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 500k log. Most commonly used in American amps and guitars. Smooth action - top quality!

OEM replacement for the Big Muff. 24mm solder terminals, split knurled shaft.

Alps RK09L1120036 10k lin mono Horizontal 15mm shaft length. Center Click.

Package contains 50 pieces. Brass adaptor sleeve that converts 6,0mm (split knurled shaft) pots to 6,3mm (full solid shaft) potentiometers. Set of 50 pieces.

Double pot with middle stop, consisting of two counter-rotating logarithmic pots. Small size. Thread length: 10mm. 8mm thread diameter. Housing: 17mm. Knurled shaft.

Custom made pot. Lead time approx. 2 weeks. See detailed description for possible values and ordering instructions.

Custom made pot. Lead time approx. 2 weeks. See detailed description for possible values and ordering instructions.

Custom made pot. Lead time approx. 2 weeks. See detailed description for possible values and ordering instructions.

Custom made pot. Lead time approx. 2 weeks. See detailed description for possible values and ordering instructions.

Custom made pot. Lead time approx. 2 weeks. See detailed description for possible values and ordering instructions.

Transparent dust seal cover for 16mm pots. Fits Alpha, Hongh and many others.

The EMG Afterburner is a gain pot that can be installed on a guitar in place of a volume or tone pot. The pot has two detents at 8dB and 15dB. A maximum of 20dB gain boost is possible, which allows overdriving the amp easily or get more volume for solos.

Pot with long shaft, made by EMG. Split shaft, solder lugs. DPDT switched.

Pot with 10mm brass shaft, made by EMG. Full shaft. Tone pot 25k.

Pot with 20mm long brass shaft, made by EMG. Split shaft. Tone pot 25k.

Pot with 10mm brass shaft, made by EMG. Full shaft. Volume pot 25k.

EVH 250k log custom potentiometer. Low Friction. Body diameter: 24mm.

Original Fender Knob spacers, for use with chicken head knobs. (Package of 12).

The CHOPPERPOT's switch is a momentary switch. In order to prevent too loud noise when actuated and to make it feel nice and smooth, a rubber ring is mounted on the axle. The CHOPPERPOT consists of a normal potentiometer with knurled shaft, which can be wired independently of the switching function. Underneath sits a 6-pole switch that is actuated when pressure is applied to the axle.

The CHOPPERPOT's switch is a momentary switch. In order to prevent too loud noise when actuated and to make it feel nice and smooth, a rubber ring is mounted on the axle. The CHOPPERPOT consists of a normal potentiometer with knurled shaft, which can be wired independently of the switching function. Underneath sits a 6-pole switch that is actuated when pressure is applied to the axle.

Ibanez replacement pot 100k lin. For Tube Screamer and other pedals.

Ibanez replacement pot 20kW. For Tube Screamer and other pedals.

Korg replacement potentiometer, 11mm. Shaft type: 6mm D-Shaft. 100K log.

Korg replacement potentiometer, 11mm. Shaft type: 6mm D-Shaft. 10K log.

Korg replacement potentiometer, 11mm. Shaft type: 6mm D-Shaft. 200K lin.

Korg replacement potentiometer, 11mm. Shaft type: 6mm D-Shaft. 20K lin.

Korg replacement potentiometer, 11mm. Shaft type: 6mm D-Shaft. 5K lin.

Pot Adaptor Washer, converts 8mm bushing pot to fit 3/8 inch pickguard hole.

Black extension axis for potentiometers. 6mm diameter, 100mm length. Made of PCV. Easily cuts to the desired length.

Sealed 250k log guitar potentiometer
24mm diameter. Knurled shaft.

Liberator Solderless Potentiometer 500k, Standard shaft

SDP-500, 500K Pot with SD logo

YJM-500, 500K Pot with YJM Logo

Kill Pot SH124-250, made by Shadow. 250K log. 16mm diameter pot, split shaft with solder lugs and extra long shaft. Pressing the button immediately stops the sound until the button is released. Fast action with small travel allows fast machine-gun sounds. Pot has click mechanism at full volume setting that helps to avoid turning the pot by accident when pushing it fast.

Kill Pot SH124-500, made by Shadow. 500K log. 16mm diameter pot, split shaft with solder lugs and extra long shaft. Pressing the button immediately stops the sound until the button is released. Fast action with small travel allows fast machine-gun sounds. Pot has click mechanism at full volume setting that helps to avoid turning the pot by accident when pushing it fast.

10k lin OEM replacement for the Electro Harmonix Soul Food and Bass Soul Food pedals

Stereo pot 50k lin with switch.

100k log potentiometer, made by TT Electronics. 16mm rotary panel mount potentiometer with full shaft and solder lugs. Low noise conductive plastic element.