Xvive VTL5C1
Xvive VTL5C1 Optocoupler. Package/Case: 4 pin, Leaded. Propagation Delay: 35uS. Voltage Rating: 100V. Mounting Type: Through Hole. Number of Channels: 1.
€6,34
including VAT
19%
, [plus shipping]
Xvive VTL5C2
Xvive VTL5C2 Opto-electronics Optocoupler. Resistance Output. Package/Case: 4 pin, Leaded. Propagation Delay: 500uS. Voltage Rating: 200V. Number of Channels: 1.
€6,34
including VAT
19%
, [plus shipping]
Xvive VTL5C3
Xvive VTL5C3. Package/Case: 4 pin, Leaded. Propagation Delay: 35uS. Voltage Rating: 250V. Mounting Type: Through Hole. Number of Channels:1.
€6,34
including VAT
19%
, [plus shipping]
Xvive VTL5C3/2
Xvive VTL5C3/2 Optocoupler. Package/Case: 5 pin, Leaded. Propagation Delay: 150uS. Voltage Rating: 50V. Mounting Type: Through Hole. Number of Channels:2. The VTL5C3/2 is a dual element Axial Vactrol with steep slope, good dynamic range, a very low temperature coefficient of resistance and a small light history memory.
€10,12
including VAT
19%
, [plus shipping]
Xvive VTL5C4
Xvive VTL5C4 Optocoupler. Package/Case: 4 pin, Leaded. Propagation Delay: 6uS. Voltage Rating: 50V. Mounting Type: Through Hole. Number of Channels: 1.
€6,34
including VAT
19%
, [plus shipping]
Xvive VTL5C4/2
Xvive VTL5C4/2 Optocoupler. Package/Case: 5 pin, Leaded.Propagation Delay: 6uS. Voltage Rating: 30V. Mounting Type: Through Hole. Number of Channels: 2. The VTL5C4/2 features a very low on resistance, fast response time, with a smaller temperature coefficient of resistance than VTL5C1.
€10,12
including VAT
19%
, [plus shipping]
Xvive VTL5C9
Xvive VTL5C9 Optocoupler. Package/Case: 4 pin, Leaded. Propagation Delay: 50uS. Voltage Rating: 100V. Mounting Type: Through Hole. Number of Channels: 1.
€7,60
including VAT
19%
, [plus shipping]
Xvive VTL5C10
Xvive VTL5C10 Optocoupler. Package/Case: 4 pin, Leaded. This offers a low on resistance at low drive currents, a fast response time, and has a smaller temperature coefficient than the VTL5C9.
€9,48
including VAT
19%
, [plus shipping]
Vactec VTL5C1
Original NOS Vactrol Optocoupler. Package/Case: 4 pin, Leaded. Propagation Delay: 35uS. Voltage Rating: 100V. Mounting Type: Through Hole. Number of Channels: 1.
€40,48
including VAT
19%
, [plus shipping]
Vactec VTL5C2/2
Vactrol Optocoupler. Package/Case: 5 pin, Leaded.
€126,37
including VAT
19%
, [plus shipping]
Vactec VTL5C9
Vactrol Optocoupler. Package/Case: 4 pin, Leaded. Propagation Delay: 50uS. Voltage Rating: 100V. Mounting Type: Through Hole. Number of Channels: 1.
€24,54
including VAT
19%
, [plus shipping]
Silonex NSL32-SR2
NSL-32SR2 Optocoupler, made by Silonex Advanced Photonics.
€4,96
including VAT
19%
, [plus shipping]
Silonex NSL32SR3
NSL-32SR3 Optocoupler, made by Silonex Advanced Photonics.
€4,89
including VAT
19%
, [plus shipping]
Silonex NSL-5152
Silonex Advanced Photonics NSL5152 photocell.
€1,61
including VAT
19%
, [plus shipping]
Silonex NSL-5542
Silonex Advanced Photonics NSL5542 photocell.
€2,36
including VAT
19%
, [plus shipping]
Optoisolator FND
Vibrato LDR Optocoupler for Fender Amps. Good replacement for Fender p/n 16282.
€8,34
including VAT
19%
, [plus shipping]
Macron MI1210CLD-R
Macron MI1210CLD-R is similar to VTL5C2. 4,0 to 5,0K On, 5,0 + Meg Off. Fast On/Slow Off.
€8,70
including VAT
19%
, [plus shipping]
Macron MI1210CLE-R
Macron MI1210CLE-R is similar to VTL5C1. 1,0-2,0K, Off resistance > 50 Megohms. Will also work as a substitute for VTL5C9 if you give it more drive current. May be used as substitute fot VTL5C6 with minimal trimming of other components.
€10,98
including VAT
19%
, [plus shipping]
Macron MI1210CLF-R
Macron MI1210CLF-R is similar to VTL5C3. 10 to 20K On, 10 Meg Off. Fast On/Medium-Fast Off.
€8,29
including VAT
19%
, [plus shipping]
Audio Opto Coupler
These are used extensively in audio compressors, audio level controls, limiters, expanders, noise gates, tremolo effects, guitar amplifiers etc. 400R ON resistance.
€5,52
including VAT
19%
, [plus shipping]
H11F3
Photo-FET, On: 470 ohm max, +/- 15V operation. DIP6.
€3,36
including VAT
19%
, [plus shipping]
Optoswitcher Module 6V LED
The Opto-switcher module pre-soldered assembly can be used or any application where you need a 6v directly driven photocell based optocoupler. This can be used as a 6v version of the Fender style optoisolator and uses the same photocell.
€11,04
including VAT
19%
, [plus shipping]
NSL-5910
Advanced Photonix NSL-5910 photocell. Cell Resistance at Illuminance: 1 - 2kOhms at 21 lux. Dark resistance: 100 kOhms at 5 s.
€8,89
including VAT
19%
, [plus shipping]
