Fret Files

Fret crowning file for narrow frets. Length: 19,5cm. Width: 16mm. Thickness: 4mm. Made in Japan.

Fret crowning file for wide (jumbo) frets. Length: 19,5cm. Width: 16mm. Thickness: 4mm. Made in Japan.

Fret File blade, used to work on frets in the fretboard. May also be used to improve old, worn out frets. Size: 160 x 28mm.

Fret File, narrow profile, approx. 1mm. For example used for mandolin, ukulele or banjo frets.

Acrylic body with high carbon fret blades. Two degrees: 35° and 90°. Size: 150 x 60 x30mm. The 90-degree right-angle file is for initial smoothing and flush-filing. THe 35-degree angled bevel file is for perfectly beveling fret ends before final dressing.

A high quality precision file specially made for dressing frets with a long service life. Size: 192 x 38 x 8mm.

This compact dual grit diamond plate is ideal for honing sharp fret ends or for sharpening tools. 400/1000 grit.

compact fret crown file, small (R:1mm) coarse cut and fine cut sides, blue

compact fret crown file, jumbo (R:3mm) coarse cut and fine cut, red

fret end file (pencil like shape) for precise filing, for medium frets (R=2mm)

Hosco Japan fret levelling file. Size: 160 mm (L) x 28mm (W) x 5 mm (D), single cut teeth per inch : 20 cut.

Hosco fret puller, carbon steel, blade. Width 10,0mm. Flat blade thickness 0,40mm.

fret slot saw, carbon steel, thickness: 0,50 mm, universal cutting teeth, tooth spacing 1.25mm

fret tang nipper, easy fret tang cutting job, for jumbo frets

Hosco Japan Zone File under-string fret rocker and diamond file, for higher fret area, 50x30x10mm. The Zone File is a unique tool that allows you to check the fret level while the strings are on and, if necessary, make adjustments with the diamond file on the fly. To cover the zone from the low fret to the high fret, four lengths were needed. For this reason the Zone files were designed in a trapezoidal shape; two files make one full set.

Nut slotting files set of 3 pcs acoustic guitar, 016 inch /042 inch, 026: / 050, 036:/ 055 inch

Nut slotting files set of 3pcs for classic guitar, 030 inch /038, 032 inch /042 inch, 035 inch /046 inch

Nut slotting files set of 3 pcs for ukelele, 022 inch /028 inch, 024 inch /032 inch, 026 inch /036 inch

Hosco nut file. 15cm length, teeth per inch : 80. Width: 013 inch / 0,33 mm

Hosco nut file. 15cm length, teeth per inch : 76. Width: 024 inch / 0,61 mm

Hosco nut file. 15cm length, teeth per inch : 78. Width: 032 inch / 0,81 mm

Hosco nut file. 15cm length, teeth per inch : 78. Width: 042 inch / 1,07 mm

Hosco nut file. 15cm length, teeth per inch : 78. Width: 050 inch / 1,27 mm

Set of 10 Hosco thin nut files. Sizes: 010-013-016-024-028-032-036-042-046-056 inch .

MusicNomad 2 in 1 Fret Beveling Replacement File for B-File (MN832)

MusicNomad Fret End Dressing File (E-File) (MN830)

MusicNomad Fret Leveler (MN811) - Leveling (L-Beam) 17.6 (45 cm) for Acoustic and Electric Guitars

MusicNomad Sandpaper for Fret Leveler L-Beam (MN815) - P240 Grit - 300 x 2,2 cm (10 ft. x 7/8) Roll

Notched precision straightedge for stringed instruments. Made of Steel, with comfortable grip.

fret eraser 2000 grit

fret eraser 400 grit

fret eraser 800 grit

An easy way to make your frets shine! Fret Erasers are flexible self-padded rubber blocks embedded with abrasive grits. Set of 7 pieces. Each Fret Eraser is 63.50mm x 19.05mm x 9.52mm.

Fret levelling file (7.5 cm)

nut file backer, for narrow files

Understring fret dressing file, 10 degree angle