9 pin Miniature Socket Saver
Great for preserving hard-to-replace tube sockets.
€5,20
including VAT
19%
, [plus shipping]
Adaptor 6U8A to 7199
Tube adaptor to use an 6U8A/ECF82 in place of a 7199. High quality gold plated ceramic socket in metal sleeve.
€17,49
including VAT
19%
, [plus shipping]
Adaptor EL84 to 6V6
Tube adaptor to use an EL84 tube in place of a 6V6. High quality gold plated ceramic socket in metal sleeve.
€19,04
including VAT
19%
, [plus shipping]
Dynakit 7199 Adaptor
Adapter which permits use of 6GH8A power tubes.
€30,33
including VAT
19%
, [plus shipping]
Octal Keyway Replacement
Replacement keyway if the keyway on your valuable octal tube has broken off the base. Simply clean the remainder of the broken keyway from the base and slip one of these on. Will stay on by itself, or you can use a dab of silicon to attach if you wish.
€5,11
including VAT
19%
, [plus shipping]
Octal Tube Socket Saver BRSV-8
This 8 pin octal socket saver with mounting bracket is often used in tube testers. It takes the main wear and tear from many tube insertions and removals. Replacing the socket saver is much easier then replacing the original socket in the tester.
€12,29
including VAT
19%
, [plus shipping]
Octal Tube Socket Saver PSV-8
This 8 pin octal socket saver is often used in tube testers. It takes the main wear and tear from many tube insertions and removals. Replacing the socket saver is much easier then replacing the original socket in the tester.
€13,10
including VAT
19%
, [plus shipping]
Tube Adaptor EL84 to 6V6
EL84, 6BQ5, 6P14 to 6V6 Vacuum Tube Amplifier Socket Adapter Converter.
€22,09
including VAT
19%
, [plus shipping]
Tube Base 4-pin, Black
Black 4-pin tube base, American style. Measures 1 ¼ inch diameter and 1 1/16 inch height.
€5,68
including VAT
19%
, [plus shipping]
Tube Base 4-pin, White
White 4-pin tube base. Measures 1 ¼ inch diameter and 1 1/16 inch height.
€8,54
including VAT
19%
, [plus shipping]
Tube Base 8-pin, Phenolic
8-pin octal tube base, phenolic with gold plated pins. 33mm diameter. 22mm height.
€0,89
including VAT
19%
, [plus shipping]
Tube Base 8-pin, Phenolic, Gold
8-pin octal tube base, phenolic with gold plated pins. 33mm diameter. 22mm height.
€2,32
including VAT
19%
, [plus shipping]
Tube Base 8-pin, Red
Red tube base. Measurements: 1 -1/4 inch diameter, 7/8 inch height.
€1,13
including VAT
19%
, [plus shipping]
Tube Converter 6SN7 to 12AU7
Tube Converter adaptor socket. Allows to use a 6SN7 tube in a 12AU7 socket
€27,42
including VAT
19%
, [plus shipping]
Yellow Jacket YJ7591
The YJ7591 is a specialized, current-limiting/voltage-conditioning adapter for use in most amplifiers that use 7591 output tubes. The ground wire connects to chassis-ground for cathode-biased amplifiers. Drops Output Power: Slightly. It comes with a JJ EL84 vacuum tube. Safe for all common amplifiers and transformers.
€59,14
including VAT
19%
, [plus shipping]
Yellow Jacket YJR
The YJR is a direct plug-in replacement adapter for use in most amplifiers that use 5AR4/GZ34, 5U4, 5Y3 or similar full-wave rectifier tubes. The YJR converts your amp
€19,34
including VAT
19%
, [plus shipping]
Yellow Jacket YJS
The YJS is a specialized, current-limiting/voltage-conditioning adapter for use in most 20 to 100 watt amps that use 6L6, EL34, 6550 or 6V6 output tubes. It converts these tubes to EL84. The YJS is for amps with fixed bias power tubes.
€60,90
including VAT
19%
, [plus shipping]
Yellow Jacket YJUNI
The YJUni is a simple pin-converting adapter for use in most amps with 6V6 or similar based tubes like 6F6, 6G6, 6K6, 6Y6, etc. The YJUni is shorter than standard Yellow Jacket®. It is designed for use in lower power output amps (20 watts or less) when no power reduction is desired.
€48,16
including VAT
19%
, [plus shipping]
