Weber

Weber 12 inch Beam Blocker (4 inch Dome).

Weber 15 inch Beam Blocker (5 inch Dome).

Weber GMC1E MTF Attenuator Cable. 1/4 inch Male to Female speaker cable. 12 inch long. 16ga wire.

Weber GMC1RPPP MTM RCA Attenuator Cable. Metal jacketed 1/4 inch phone plug on one end, RCA plug on other end. 1 foot length.

Weber GMC2E MTM 1/4 inch Attenuator Cable. 1/4 inch Male to Male speaker cable. 24 inch long. 16ga wire.

Weber GMC4E MTM 1/4 inch Attenuator Cable. 1/4 inch Male to Male speaker cable. 48 inch long. 16ga wire.

Weber GMC8E MTM 1/4 inch Attenuator Cable. 1/4 inch Male to Male speaker cable. 96 inch long. 16ga wire.

Passive volume control for use on any line-level signal with no volume control - such as the LINE OUT jack on the Minimass, Mass Lite, Micromass, etc.

Weber Mass 200W attenuator. Full attenuation for up to 120W amplifiers and slight attenuation for up to 200W amplifiers.

Weber Mass Lite 100W attenuator. Full attenuation for up to 60W amplifiers and slight attenuation for up to 100W amplifiers.

Weber Minimass 50W attenuator. Full attenuation for up to 35W amplifiers and slight attenuation for up to 50W amplifiers.

Weber speaker silencer 20W. Use in-line or in place of one 20w speaker. 4 Ohm.

Weber SnufferStick High Voltage Discharge Stick. Clip to the chassis for ground, then hold on your filter caps to discharge dangerous high voltage present when you turn off your amp.

The Two-Head Amp Switcher NFS (No Footswitch) allows you to switch two different heads to the same speaker or speaker cabinet. The heads are toggle switch-selectable, and the impedance is selectable: 2, 2.6, 4, 5.3, 8, 16 ohms. The head that is not in use is put into a 200 watt dummy load of the impedance you selected. The Two-Head Amp Switcher includes a level adjustable balanced (XLR) line out jack. Included in the purchase of the Two-Head Amp Switcher is the main control unit and a wall wart power supply 220-240VAC input.