TAD

The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.

The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.

Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 630VDC. Size (LxD): 18x8mm.

The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.

Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 630VDC. Size (LxD): 22x9mm.

The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.

Sprague Orange Drop, made for TAD Tube Amp Doctor. Voltage rating: 600V
0,005uF=5,0nF=5000pF. Size (LxDxH): 17,8x9,1x10,2mm.

The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.

Dimensions (D x L): 12 x 30 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 450V. Temperature: 85 degrees Celsius.

Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 630VDC. Size (LxD): 20x12mm.

Sprague Orange Drop, made for TAD Tube Amp Doctor. Voltage rating: 600V
0,010uF=10nF=10000pF. Size (LxDxH): 22,9x9,1x10,2mm.

Dimensions (D x L): 10 x 20 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 100V. Temperature: 105 degrees Celsius.

The best sounding caps for filters and tone circuits. Made by TAD - Tube Amp Doctor. Voltage rating: 500V. Size (LxDxH): 10,92x3,56x7,11mm.

Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 160VDC. Size (LxD): 30x17,5mm.

Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 630VDC. Size (LxD): 32x10mm.

Dimensions (D x L): 12 x 30 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 475V. Temperature: 85 degrees Celsius.

Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 160VDC. Size: 20x13mm. Size (LxD): 22x12,5mm.

Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 630VDC. Size (LxD): 32x14,5mm.

Sprague Orange Drop, made for TAD Tube Amp Doctor. Voltage rating: 600V
0,047uF=47nF=47000pF. Size (LxDxH): 31,8x13,2x14,2mm.

Replica of the authentic foil-to-foil construction of the vintage 60s Mullard / Philips capacitors. Very good choice for restoring vintage amps or for improving new amps and designs.
Rated voltage: 160VDC. Size: 26x16mm.

Sprague Orange Drop, made for TAD Tube Amp Doctor. Voltage rating: 600V
0,1uF=100nF=100000pF. Size (LxDxH): 31,8x18x19,2mm.

Sprague Orange Drop, made for TAD Tube Amp Doctor. Voltage rating: 600V
0,22uF=220nF=220000pF. Size (LxDxH): 22,9x12,2x13,2mm.

Sprague Orange Drop, made for TAD Tube Amp Doctor. Voltage rating: 400V
0,47uF=470nF=470000pF. Size (LxDxH): 41,9x20,8x22,4mm.

Dimensions (D x L): 22 x 40 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 500V. Temperature: 105 degrees Celsius.

Dimensions (D x L): 25 x 60 mm. The TAD GoldCap is an radial, can type electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 500V. Temperature: 85 degrees Celsius.

Dimensions (D x L): 26 x 50 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 450V. Temperature: 85 degrees Celsius.

TAD Vintage Oil capacitor. Aluminum foil plates, oil dielectric. Smooth, natural sounding audio signal capacitor. Superb performance in guitar tone control circuits, tube guitar amplifiers, tube hifi amplifiers and tube studio equipment. Hermetically sealed aluminum tube casing with outer insulation jacket.
Rated voltage: 600VDC. Size (LxD): 16x9mm.

TAD Vintage Oil capacitor. Aluminum foil plates, oil dielectric. Smooth, natural sounding audio signal capacitor. Superb performance in guitar tone control circuits, tube guitar amplifiers, tube hifi amplifiers and tube studio equipment. Hermetically sealed aluminum tube casing with outer insulation jacket.
Rated voltage: 600VDC. Size (LxD): 22x11mm.

Dimensions (D x L): 25 x 50 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 450V. Temperature: 85 degrees Celsius.

Dimensions (D x L): 35 x 50 mm. The TAD GoldCap is an radial, can type electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 500V. Temperature: 85 degrees Celsius.

Dimensions (D x L): 35 x 75 mm. The TAD GoldCap is an radial, can type electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 500V. Temperature: 85 degrees Celsius.

Dimensions (D x L): 35 x 60 mm. The TAD GoldCap is a radial, can type electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind. Voltage: 350V. Temperature: 85 degrees Celsius.

Dimensions (D x L): 25 x 40 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 500V. Temperature: 85 degrees Celsius.

TAD Reverb Tank Bag, Small (23,5cm).

Solid state rectifier tube that replaces 5U4G/GB, GZ34, 5AR4 and 5Y3 tubes.

Thick glass and heavy duty construction can be found on this tube. Gold grid wire limits stray characteristics and improves overall reliability. Highest grade audiophile quality sound and construction.

Recommended tube for reverb tones in Fender amps. Especially powerful as a phase driver tube.

Good choice rectifier tube for smaller vintage amps like the Champ.

Good Gain - Airy Top End - Fat Mid-range. Selected for low noise and balanced systems is this tube recommended for guitar and audio amplifers to improve overall response. Best for clean tones as well as for sounds requiring fat midrange, detailed airy top end and lots of power from the preamp.

The TAD Selected 5751 (RT009) is a first choice for noticeably improved clarity, smoothness, and a true vintage tone character for most guitar amps. There will still be plenty of gain - so if you own a high-gain preamp that does not have these classic crunch characteristics, the 5751 tube will work wonders.

The TAD ECC81 / 12AT7-Cz is selected with regards to a tight balance of both triodes making it ideal for the use as BALANCED PHASE DRIVER. In addition to the perfect symmetrical systems, the strong amplification characteristics of the TAD ECC81 / 12AT7-Cz support increased dynamics of the output stage when used as phase driver or phase inverter tube.

TAD 8AB2D1A reverb tank. 3 Springs, medium decay (typically used for Roland JC120 (old), Roland RE501). Length: 23,5cm, 10 Ohm / 0,8 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

TAD 8AB3C1B reverb tank. 3 Springs, long decay (typically used for Fender Super Champ). Length: 23,5cm, 10 Ohm / 0,8 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

TAD 8EB2C1B reverb tank. 3 Springs, medium decay (typically used for Fender and VOX). Length: 23,5cm, 800 Ohm / 58 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

TAD 8BB3C1B reverb tank. 3 Springs, long decay (typically used for Rivera and Brunetti). Length: 23,5cm, 190 Ohm / 26 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

TAD 8BB2C1A reverb tank. 3 Springs, medium decay (typically used for Kitty Hawk Supreme, Rivera). Length: 23,5cm, 190 Ohm / 26 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

Low noise, lower gain tube that is recommended to solve microphonic problems.

The TAD 12BH7A REDBASE combines the best sonic and mechanical performance of the NOS RCA black plate with advantages of the GE version. A maximum of reliability with outstanding tonal quality makes the new balanced selected TAD 12BH7A REDBASE the first choice for Ampeg SVT's, the Blackstar HT-5, Marshall DSL5, certain Hammond organs and all HIFI audio applications.

7189A TAD Selected