TAD

TAD 8DB2C1B reverb tank. 3 Springs, medium decay (typically used for Marshall). Length: 23,5cm, 310 Ohm / 36 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

TAD 8FB2A1B reverb tank. 3 Springs, medium decay (typically used for SLM). Length: 23,5cm, 1925 Ohm / 250 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

TAD 9AB1C1B reverb tank. 3 Springs, short decay (typically used for Diezel). Length: 42,5cm, 3 x 2 springs, 10 Ohm / 0,8 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

TAD 9AB2C1B reverb tank. 3 Springs, medium decay (typically used for Fender upgrade for deeper reverb). Length: 42,5cm, 3 x 2 springs, 10 Ohm / 0,8 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

TAD 9BB2C1B reverb tank. 3 Springs, medium decay (typically used for VOX 50CPH upgrades AC30CC). Length: 42,5cm, 3 x 2 springs, 190 Ohm / 26 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

TAD 9FB2D1B reverb tank. 3 Springs, medium decay (typically used for TLN-156 Neural Agonizer). Length: 42,5cm, 3 x 2 springs, 1925 Ohm / 200 Ohm (input impedance / DC). 2575 Ohm / 200 Ohm (output impedance / DC).

Premium Amp Cover for TAD AD RSC212 / RSC115and Fender Bassman / Bandmaster 2x12

Dimensions (D x L): 30 x 50 mm. The TAD AudioCap is an electrolytic capacitor that has been wound with flat foil, similar to the ones used from the 1950s to the 1970s. Sure to improve the sound of new amps and a fine way to retain the original character when restoring vintage equipment.
Voltage: 350V.

Dimensions (D x L): 25 x 49 mm. The TAD AudioCap is an electrolytic capacitor that has been wound with flat foil, similar to the ones used from the 1950s to the 1970s. Sure to improve the sound of new amps and a fine way to retain the original character when restoring vintage equipment.
Voltage: 350V.

Testing tool with backlighted display and two noval measurement adaptors. Measures the bias current of any EL84, etc.

Testing tool with backlighted display and four noval measurement adaptors. Measures the bias current of any EL84, etc.

Pair of test adaptors for measuring EL84 tubes. The test adaptors can be used with the TAD Bias Master.

Amp Kit Blackface 22 Reverb AB763 Style with approx. 22 watt power. This Amp Kit is based on the legendary Fender Deluxe Reverb. The sweet tone of the 6V6 tubes, the famous tube reverb, the Tremolo and just right power all in a handy package. Probably one of the most sought after vintage Fender style amps as this one does have all the features the original vintage beast got famous for. Kit incl. head cabinet covered with black tolex with silver&black grill cloth, sphinx glides and strap-handle.

Amp Kit Blackface 22 Reverb AB763 Style with approx. 22 watt power. This Amp Kit is based on the legendary Fender Deluxe Reverb. The sweet tone of the 6V6 tubes, the famous tube reverb, the Tremolo and just right power all in a handy package. Probably one of the most sought after vintage Fender style amps as this one does have all the features the original vintage beast got famous for. Kit, cabinet and speaker (1x Jensen C12Q 35 Watt 8 Ohm).

Amp Kit Blackface 14 Reverb AA1164 Style with approx. 14 watt power. This Amp Kit is an homage to the historic 1964 version Fender Princeton Reverb Amp. The famous Blackface 14 Reverb Amp has the full size reverb and the cool bias tremolo like Ry Cooder. Kit incl.1x12 inch cabinet covered with black tolex with silver&black grill cloth, sphinx glides and strap-handle.

Amp Kit Blackface 14 Reverb AA1164 Style with approx. 14 watt power. This Amp Kit is an homage to the historic 1964 version Fender Princeton Reverb Amp. The famous Blackface 14 Reverb Amp has the full size reverb and the cool bias tremolo like Ry Cooder. Kit incl. head cabinet covered with black tolex with silver&black grill cloth, sphinx glides and strap-handle.

Amp Kit Blackface 14 Reverb AA1164 Style with approx. 14 watt power. This Amp Kit is an homage to the historic 1964 version Fender Princeton Reverb Amp. The famous Blackface 14 Reverb Amp has the full size reverb and the cool bias tremolo like Ry Cooder. Kit,cabinet and speaker (1x Jensen C10Q 35 Watt 8 Ohm).

Amp Kit Blackface 45 Reverb AB763 Style with approx. 45 watt power. This Amp Kit is based on the legendary Fender Super Reverb. Famous for its sweet yet shiny tone of the 6L6 tubes and the famous tube reverb, the Tremolo. Probably one of the most sought after vintage Fender style amps. This one does have all the features, the original vintage beast got famous for. The pure kit without cabinet.

Amp-Kit Tube Reverb 6G15 Style. The famous 60s tube reverb with its genuine sweet and full-bodied tone. Controls include DWELL, MIX and TONE. Fat single note reverb and classic Surf-Sounds can easily be achieved with this timeless fully tubed beauty. Kit blackface style incl. cabinet. covered with black tolex with silver&black grill cloth.

Amp Kit Blackface 40 Reverb AB763 Style with approx. 40 watt power. This Amp Kit is based on the legendary Fender 1x15" Vibroverb. Famous for its sweet yet shiny tone of the 6L6 tubes and the famous tube reverb, the Tremolo. Probably one of the most sought after vintage Fender style amps. This one does have all the features, the original vintage beast got famous for. Kit incl.1x15 inch cabinet covered with black tolex with silver&black grill cloth, sphinx glides and strap-handle.

Tweed 5E3 style, 16 Watt amp. This Amp has just the right volume for club gigs and offers excellent tweed tone. With two volume and one tone control this amp provides an unbelievevable complex tone structure from bell clean chime, sweet compression to raw and dirty tweed tone. Kit incl. tweed head cabinet with nitro-aged tweed and fingers interlocked

Wonderfully powerful EL34 with a great British Rock'n'Roll tone.

This is a long plate ECC83 / 12AY7A in the tradition of the famous vintage ECC803S. This tube has 1dB less gain than the TAD ECC83-CZ but better definition and detailed tonal response. Recommended choice for HiFi.

Selected ECC83 tube for the big, warm clean sounds. Recommended for HiFi amps too. Defined tone with mellow top end when pushed into overdrive.

In the tradition of the legendary Telefunken EL34, the TAD EL34-STR REDBASE provides a gorgeous, dynamic and amazingly open in-yer-face tone with just the right amount of angriness. Expect a clear, harmonic and open top end, a lovely spot-on midrange, with vocal low-mids and a great bass response as you would expect it from a TAD EL34. Extra rugged glass envelope, golden control grid wire, two especially large cooling grids and special high-precision construction with smallest tolerances guarantee for maximum stability and reliability.

In the tradition of the legendary Telefunken EL34, the TAD EL34-STR REDBASE provides a gorgeous, dynamic and amazingly open in-yer-face tone with just the right amount of angriness. Expect a clear, harmonic and open top end, a lovely spot-on midrange, with vocal low-mids and a great bass response as you would expect it from a TAD EL34. Extra rugged glass envelope, golden control grid wire, two especially large cooling grids and special high-precision construction with smallest tolerances guarantee for maximum stability and reliability.

In the tradition of the legendary Telefunken EL34, the TAD EL34-STR REDBASE provides a gorgeous, dynamic and amazingly open in-yer-face tone with just the right amount of angriness. Expect a clear, harmonic and open top end, a lovely spot-on midrange, with vocal low-mids and a great bass response as you would expect it from a TAD EL34. Extra rugged glass envelope, golden control grid wire, two especially large cooling grids and special high-precision construction with smallest tolerances guarantee for maximum stability and reliability.

One of the most powerful EL84 tubes available. It delivers a big punch and dynamic tone.

Ultra high power tube! Makes every amp sound punchier, more voluminous and more powerful. Single tube.

Thick glass and heavy duty construction can be found on this tube. Gold grid wire limits stray characteristics and improves overall reliability. Highest grade audiophile quality sound and construction.

Thick glass and heavy duty construction can be found on this tube. Gold grid wire limits stray characteristics and improves overall reliability. Highest grade audiophile quality sound and construction.

Extremely dependable, rugged and long lasting tube. Powerful sound.

Extremely dependable, rugged and long lasting tube. Powerful sound.

The TAD FANTA. (Frequency Adapted Natural Tone Accessory) Speaker Emulation is a low impedance, balanced, symmetric, transformer coupled output. Just connect it to the speaker output of your amp. it does not require any power supply or battery. The F.A.N.T.A. has a 3-pin XLR-Connector for a standard microphone cable in order to connect it to a mixing console or a recording system.

Dimensions (D x L): 22 x 40 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 350V. Temperature: 85 degrees Celsius.

Dimensions (D x L): 12 x 30 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 450V. Temperature: 85 degrees Celsius.

Dimensions (D x L): 35 x 50 mm. The TAD GoldCap is an radial, can type electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 500V. Temperature: 85 degrees Celsius.

Dimensions (D x L): 25 x 50 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 350V. Temperature: 105 degrees Celsius.

Dimensions (D x L): 16 x 32 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 500V. Temperature: 105 degrees Celsius.

Dimensions (D x L): 35 x 50 mm. The TAD GoldCap is an radial, can type electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 500V. Temperature: 85 degrees Celsius.

Dimensions (D x L): 25 x 50 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 450V. Temperature: 85 degrees Celsius.

Dimensions (D x L): 22 x 40 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 500V. Temperature: 105 degrees Celsius.

Dimensions (D x L): 35 x 75 mm. The TAD GoldCap is an radial, can type electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 500V. Temperature: 85 degrees Celsius.

Dimensions (D x L): 16 x 30 mm. Old vintage style casing. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind. This model brings more brilliance to the sound when used in the cathode position. Voltage: 50V. Temperature: 85 degrees Celsius.

Dimensions (D x L): 10 x 20 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 100V. Temperature: 105 degrees Celsius.

Dimensions (D x L): 12 x 30 mm. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind.
Voltage: 475V. Temperature: 85 degrees Celsius.

Dimensions (D x L): 16 x 30 mm. Bipolar. The TAD GoldCap is an axial electrolytic capacitor that has been designed and manufactured with tube amplifiers in mind. This model brings more brilliance to the sound when used in the cathode position.
Voltage: 25V. Temperature: 85 degrees Celsius.

TAD GZ34/5AR4-CZ PREMIUM SELECTED.

This is a remake of the legendary British KT66 that made Marshall's amps famous in the 1960s. May replace 6L6GC and 5881 tubes.