Mundorf

Mundorf Angelique 0,5mm² Stranded copper wire. Blue. Angelique Copper is a high quality copper alloy to which a certain amount of silver and a certain amount of gold is added. A copper plus sort of, for an audibly plus in musical enjoyment. At a price you would not expect from a product enriched with SilverGold. Finally, Angelique Copper's very own copper-silver-gold ratio was patented. Alternative alloys with more or less silver and/or gold were not as convincing in listening tests. It's all about the mixture!

Mundorf Angelique 1,5mm² Stranded copper wire. Blue. Mundorf item ACS1150BU. Angelique Copper is a high quality copper alloy to which a certain amount of silver and a certain amount of gold is added. A copper plus sort of, for an audibly plus in musical enjoyment. At a price you would not expect from a product enriched with SilverGold. Finally, Angelique Copper's very own copper-silver-gold ratio was patented. Alternative alloys with more or less silver and/or gold were not as convincing in listening tests. It's all about the mixture!

Mundorf Angelique 2,5mm² Stranded copper wire. Blue. Mundorf item ACS1250BU. Angelique Copper is a high quality copper alloy to which a certain amount of silver and a certain amount of gold is added. A copper plus sort of, for an audibly plus in musical enjoyment. At a price you would not expect from a product enriched with SilverGold. Finally, Angelique Copper's very own copper-silver-gold ratio was patented. Alternative alloys with more or less silver and/or gold were not as convincing in listening tests. It's all about the mixture!

Mundorf Angelique 2x 0,5mm² Twisted, stranded copper wire. Grey/Blue. Mundorf item ACS2050GY/BU. Angelique Copper is a high quality copper alloy to which a certain amount of silver and a certain amount of gold is added. A copper plus sort of, for an audibly plus in musical enjoyment. At a price you would not expect from a product enriched with SilverGold. Finally, Angelique Copper's very own copper-silver-gold ratio was patented. Alternative alloys with more or less silver and/or gold were not as convincing in listening tests. It's all about the mixture!

Mundorf Angelique 2x 2,5mm² Stranded, twisted copper wire. Grey/Blue . Mundorf item ACS2250GY/BU. Angelique Copper is a high quality copper alloy to which a certain amount of silver and a certain amount of gold is added. A copper plus sort of, for an audibly plus in musical enjoyment. At a price you would not expect from a product enriched with SilverGold. Finally, Angelique Copper's very own copper-silver-gold ratio was patented. Alternative alloys with more or less silver and/or gold were not as convincing in listening tests. It's all about the mixture!

Mundorf Angelique is uniting the outstanding musical talents of Silver (structure, analytics, transparency) and Gold (multi-faceted tonality and brilliance) with the energy and liveliness of Copper in this one perfect alloy. Conductor Diameter: 0,5mm. Cross section: 0,1963mm². Specific Weight: 1,77 g/m. DC Resistance: 87 mOhm/Meter. Bare wire without insulation.

Mundorf Angelique is uniting the outstanding musical talents of Silver (structure, analytics, transparency) and Gold (multi-faceted tonality and brilliance) with the energy and liveliness of Copper in this one perfect alloy. Conductor Diameter: 0,5mm. Cross section: 0,1963mm². Specific Weight: 1,77 g/m. DC Resistance: 87 mOhm/Meter. Blue PTFE Insulation.

Mundorf Angelique is uniting the outstanding musical talents of Silver (structure, analytics, transparency) and Gold (multi-faceted tonality and brilliance) with the energy and liveliness of Copper in this one perfect alloy. Conductor Diameter: 1,0mm. Cross section: 0,7854mm². Specific Weight: 7,07 g/m. DC Resistance: 22 mOhm/Meter. Black PTFE Insulation.

Mundorf Angelique is uniting the outstanding musical talents of Silver (structure, analytics, transparency) and Gold (multi-faceted tonality and brilliance) with the energy and liveliness of Copper in this one perfect alloy. Conductor Diameter: 1,5mm. Cross section: 1,7671mm². Specific Weight: 15,9 g/m. DC Resistance: 9,67 mOhm/Meter. Bare wire without insulation.

Mundorf Angelique is uniting the outstanding musical talents of Silver (structure, analytics, transparency) and Gold (multi-faceted tonality and brilliance) with the energy and liveliness of Copper in this one perfect alloy. Conductor Diameter: 1,5mm. Cross section: 1,7671mm². Specific Weight: 15,9 g/m. DC Resistance: 9,67 mOhm/Meter. Blue PTFE Insulation.

Mundorf Angelique is uniting the outstanding musical talents of Silver (structure, analytics, transparency) and Gold (multi-faceted tonality and brilliance) with the energy and liveliness of Copper in this one perfect alloy. Conductor Diameter: 2,0mm. Cross section: 3,1416mm². Specific Weight: 28,27 g/m. DC Resistance: 5,44 mOhm/Meter. Black PTFE Insulation.

Mundorf Angelique is uniting the outstanding musical talents of Silver (structure, analytics, transparency) and Gold (multi-faceted tonality and brilliance) with the energy and liveliness of Copper in this one perfect alloy. Conductor Diameter: 2x0,5mm. Cross section: 2x0,1963mm². Specific Weight: 4,88 g/m. DC Resistance: 87 mOhm/Meter. Individually isolated and twisted version. Black/Blue PTFE Insulation. Particularly appropriate for super tweeters and tweeters.

Mundorf Angelique is uniting the outstanding musical talents of Silver (structure, analytics, transparency) and Gold (multi-faceted tonality and brilliance) with the energy and liveliness of Copper in this one perfect alloy. Conductor Diameter: 2x1,5mm. Cross section: 2x1,7671mm². Specific Weight: 34 g/m. DC Resistance: 9,67 mOhm/Meter. Individually isolated and twisted version. Black/Blue PTFE Insulation. Particularly appropriate for mid-drivers and mid-woofers.

Metal Oxide Film resistors are preferred by many audio circuit designers due to their low inductance. Metal oxide films do not burn, thus withstanding heat better. They are mechanically and electrically very stable and they have a fast impulse response, making them suitable for high end audio equipment.
Power rating: 10W. Length: 52mm. Diameter: 8mm. Tolerance: 5%.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

The Mundorf MResist Ultra resistors are based on the well-known good tonal properties of copper-manganin foil which provides an order of magnitude lower inductance. Copper is significantly softer than the metal-oxide used for MOX resistors. The natural resonances of the copper-manganin foil are therefore significantly less pronounced, which means that distortions caused by crystallurgy and electroacoustics are significantly reduced here. Rated 3W without heat sink or 30W with optional heatsink added.

Mundorf heat sink for Mresist Ultra Series. 1x15W. Dimensions (LxHxW): 42 x 38,1 x 25mm.

The Mundorf Gold / Silver wire is a superior audio wire. It is recommended for all audio applications. Crystal clear sound while keeping all the warmth and nuances. Wire diameter is 0,5mm. Uncoated.
Price is per meter.

The Mundorf Gold / Silver wire is a superior audio wire. It is recommended for all audio applications. Crystal clear sound while keeping all the warmth and nuances. Wire diameter is 0,5mm. Yellow PTFE-insulation.
Price is per meter.

The Mundorf Gold / Silver wire is a superior audio wire. It is recommended for all audio applications. Crystal clear sound while keeping all the warmth and nuances. Wire diameter is 1,0mm. White PTFE-insulation.
Price is per meter.

The Mundorf Gold / Silver wire is a superior audio wire. It is recommended for all audio applications. Crystal clear sound while keeping all the warmth and nuances. Wire diameter is 1,5mm. Uncoated.
Price is per meter.

The Mundorf Gold / Silver wire is a superior audio wire. It is recommended for all audio applications. Crystal clear sound while keeping all the warmth and nuances. Wire diameter is 1,5mm. Yellow PTFE-insulation.
Price is per meter.

Mundorf AMT21CM2.1-C - 4 Ohm. Power: 125W - Diameter: 104mm. HifiAMT-Tweeter Concert with excellent transient response and outstanding low distortion ratio.

Dimensions (D x L): 18x39 mm.
The Mundorf Bipolar capacitor is made of smooth foil. Great specifications, good performance for any application requiring bipolar / unipolar capacitors.
Voltage: 75VDC / 50VAC.

Dimensions (D x L): 10x30 mm.
The Mundorf Bipolar capacitor is made of smooth foil. Great specifications, good performance for any application requiring bipolar / unipolar capacitors.
Voltage: 75VDC / 50VAC.

MConstruct Blade receptacles. Flat connectors. Blue.

MConstruct Blade receptacles. Flat connectors. Blue.

MConstruct Blade receptacles. Flat connectors. Red.

The small size Mundorf MCoil FERRITE PipeCore Coils made from baked solid core copper and have been specially developed for mid, low and parallel applications, for which compact dimensions and a reasonable price/performance-ratio are of essential importance.

The small size Mundorf MCoil FERRITE PipeCore Coils made from baked solid core copper and have been specially developed for mid, low and parallel applications, for which compact dimensions and a reasonable price/performance-ratio are of essential importance.

The small size Mundorf MCoil FERRITE PipeCore Coils made from baked solid core copper and have been specially developed for mid, low and parallel applications, for which compact dimensions and a reasonable price/performance-ratio are of essential importance.

The small size Mundorf MCoil FERRITE PipeCore Coils made from baked solid core copper and have been specially developed for mid, low and parallel applications, for which compact dimensions and a reasonable price/performance-ratio are of essential importance.

The small size Mundorf MCoil FERRITE PipeCore Coils made from baked solid core copper and have been specially developed for mid, low and parallel applications, for which compact dimensions and a reasonable price/performance-ratio are of essential importance.

The small size Mundorf MCoil FERRITE PipeCore Coils made from baked solid core copper and have been specially developed for mid, low and parallel applications, for which compact dimensions and a reasonable price/performance-ratio are of essential importance.