Home > Manufacturers > Banzai

Banzai

Products

2-Band Bass Preamp MM-3-Knob
Music Man Clone 2-Band Bass Preamp (3 Knob Version), pre-assembled. Faithful replica of the original circuit, including the LM4250 chip . Direct replacement for the original Ernie Ball and the reissue basses with 3 control knobs. Treble, bass and volume controls.
€106,77
including VAT 19% , [plus shipping]
Qty
2-Band Bass Preamp MM-4-Knob
Music Man Clone 2-Band Bass Preamp (4 Knob Version), pre-assembled. Faithful replica of the original circuit, including the LM4250 chip . Direct replacement for the original Ernie Ball and the reissue basses with 4 control knobs. Treble, bass and volume controls. The 4 knob version utilizes an extra push pull pot that acts as a presence cut when rolled back to help tame the attack.
€111,22
including VAT 19% , [plus shipping]
Qty
Banzai Reverb Wire Kit
This kit comes with one 1m and one 1,5m length of wire and 4 RCA plugs. You will need to cut the wire to desired length and solder the RCA plugs onto the ends.
€15,47
including VAT 19% , [plus shipping]
Qty
Banzai Reverb Wire Set (Pre-Soldered)
This pre-soldered set comes ready to go with one 1m and one 1,5m length of insulated, braided shielded wire and RCA plugs soldered to the end of each wire. Perfect replacement reverb wires for any Fender combo amp.
€21,42
including VAT 19% , [plus shipping]
Qty
Capacitor Matching
Standard capacitors may have tolerances of 20% or more. We match two capacitors to be within 2% of their designated value.
€10,00
including VAT 19% , [plus shipping]
Qty
Capacitor Selection
Standard capacitors may have tolerances of 20% or more. We select one capacitor to be within 2% of the designated value.
€5,00
including VAT 19% , [plus shipping]
Qty
Custom Work, Special Order
Add this item to your shopping cart to pay for custom work or special order items.
If you require any custom work done or if you need something that you cannot find online, please contact our sales team for a quote. If you want to purchase custom work or a special item you can use this item to pay for it.
€1,00
including VAT 19% , [plus shipping]
Qty
Potentiometer Matching
Standard potentiometers may have tolerances of 20%. We match two potentiometer to be within 2% of their designated value.
€10,00
including VAT 19% , [plus shipping]
Qty
Potentiometer Selection
Standard potentiometers may have tolerances of 20%. We select one potentiometer to be within 2% of the designated value.
€5,00
including VAT 19% , [plus shipping]
Qty
Pre-Wired 72 Tele Deluxe/Custom PW-72-L
This is a 1972 Fender Tele Deluxe/Custom pre-assembled wiring kit with four selected close tolerance 500k pots. Comes with a standard L type toggle switch for Fender reissues and originals. Use set screw knobs only.
€93,56
including VAT 19% , [plus shipping]
Qty
Pre-Wired 72 Tele Deluxe/Custom PW-72-S
This is a 1972 Fender Tele Deluxe/Custom pre-assembled wiring kit with four selected close tolerance 500k pots. Comes with a short straight toggle switch for newer aftermarket bodies that won't accept L-type switches. Use set screw knobs only.
€93,56
including VAT 19% , [plus shipping]
Qty
Pre-Wired ES-335 Kit PW-ES335
This is a pre-assembled standard Gibson ES-335 style kit designed specifically for semi hollow body guitars. It comes stock with selected CTS vintage taper guitar potentiometers. It fits most ES-335 style copies and originals.
€93,56
including VAT 19% , [plus shipping]
Qty
Pre-Wired ES-335 Kit PW-ES335-DELUXE
This is a pre-assembled premium deluxe Gibson ES-335 style kit designed specifically for semi hollow body guitars. It comes stock with selected Bourns Model 95 Premium guitar potentiometers. It fits most ES-335 style copies and originals.
€119,08
including VAT 19% , [plus shipping]
Qty
Pre-Wired Jazz Bass Kit PW-JB
This is a pre-assembled premium deluxe Jazz Bass style wiring kit using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers.
€59,52
including VAT 19% , [plus shipping]
Qty
Pre-Wired Les Paul Kit PW-LP-LONG
This is a pre-assembled premium deluxe wiring kit for Les Paul guitars, using the best, selected parts. It comes stock with selected long shaft CTS Premium guitar potentiometers. It will fit Les Paul style guitars with thicker tops.
€93,56
including VAT 19% , [plus shipping]
Qty
Pre-Wired Les Paul Kit PW-LP-SHORT
This is a pre-assembled premium deluxe wiring kit for Les Paul guitars, using the best, selected parts. It comes stock with selected standard shaft CTS Premium guitar potentiometers. It will fit Les Paul style guitars with thinner tops.
€93,56
including VAT 19% , [plus shipping]
Qty
Pre-Wired Precision Bass Kit PW-PB
This is a pre-assembled premium deluxe wiring kit for Precision Bass guitars, using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers.
€51,02
including VAT 19% , [plus shipping]
Qty
Pre-Wired SG Kit PW-SG
This is a pre-assembled premium deluxe wiring kit for SG guitars, using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers.
€93,56
including VAT 19% , [plus shipping]
Qty
Pre-Wired Strat Kit PW-Strat-Blender
This is a pre-assembled premium deluxe wiring kit for Strat style guitars, using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers. The Blender wiring kit uses one volume, one master tone, and one blender potentiometer. In the neck position you can blend the bridge pickup in to varying degrees. In the bridge position you can blend the neck pickup in to varying degrees. In positions two and four all three pickups are on at once.
€59,52
including VAT 19% , [plus shipping]
Qty
Pre-Wired Strat Kit PW-Strat-HSS
This is a pre-assembled premium deluxe wiring kit for Strat style guitars with one humbucker and two singlecoils, using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers. It uses a master volume, shared tone control for the neck and middle pickups, and a tone control for the bridge pickup. 500k pots give the humbucker the correct load and we use a resistor on the single coils to give them the correct 250k load so there is no compromise mixing single coils with humbuckers.
€76,54
including VAT 19% , [plus shipping]
Qty
Pre-Wired Strat Kit PW-Strat-SSS
This is a pre-assembled premium deluxe wiring kit for Strat style guitars with three singlecoils, using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers. It uses a master volume, tone control for the neck pickup, and a shared tone control for the middle and bridge pickups.
€59,52
including VAT 19% , [plus shipping]
Qty
Pre-Wired Tele Kit PW-Tele-3-way
This is a pre-assembled premium deluxe 3-way wiring kit for Tele style guitars. It uses a custom 3-way switch to give you standard Tele switching features with 1 volume and 1 tone.
€59,52
including VAT 19% , [plus shipping]
Qty
Pre-Wired Tele Kit PW-Tele-4-way
This is a pre-assembled premium deluxe 4-way wiring kit for Tele style guitars. It uses a custom 4-way switch to give you a fat series humbucker tone in the 4th position while retaining the standard Tele switching functions in the other 3 positions.
€59,52
including VAT 19% , [plus shipping]
Qty
Pre-Wired Tele Kit PW-Tele-Custom
This is a pre-assembled premium deluxe wiring kit for Tele Custom style guitars. It has been designed specifically with 500k pots for Telecasters with a humbucker or P-90 in the neck and a single coil in the bridge. It uses a 470k resistor in series with the single coil bridge pickup to give the single coil a 250k load, while giving the humbucker it's proper 500k load.
€59,52
including VAT 19% , [plus shipping]
Qty
Treble Bleed Circuit - Ceramic
This is an easy to install mod to avoid treble bleed and get a more uniform tone on your volume control from 1 - 10. Hand soldered 150k carbon composition resistor in parallel with a 1nF ceramic capacitor.
€5,65
including VAT 19% , [plus shipping]
Qty
Treble Bleed Circuit - Mallory
This is an easy to install mod to avoid treble bleed and get a more uniform tone on your volume control from 1 - 10. Hand soldered 150k carbon composition resistor in parallel with a 1nF Mallory capacitor.
€6,84
including VAT 19% , [plus shipping]
Qty
Treble Bleed Circuit - Orange Drop
This is an easy to install mod to avoid treble bleed and get a more uniform tone on your volume control from 1 - 10. Hand soldered 150k carbon composition resistor in parallel with a 1nF Orange Drop capacitor.
€6,84
including VAT 19% , [plus shipping]
Qty
Twisted Speaker Wire Black/White
Speaker wire, pre-twisted. Stranded, PVC coated. High quality wire, made in Germany. Black and White. Sold per meter, enter how many meters you want.
€2,59
including VAT 19% , [plus shipping]
Qty
Volume Mod Kit for Guitars
This is simply a 220K resistor in parallel with a 470pf capacitor. We use selected, high quality, close tolerance metal film resistors and ceramic capacitors to preserve high end frequencies and improve the taper when rolling back your volume potentiometer.
€3,57
including VAT 19% , [plus shipping]
Qty
Wiring Harness 1x12-2x12 cabinets
Wiring Harness for 1x12-2x12 cabinets (series or parallel) with 6,3mm right angle plug and speaker crimps.
€18,31
including VAT 19% , [plus shipping]
Qty
Wiring Kit 72 Tele Deluxe/Custom WK-72-L
This is a 1972 Fender Tele Deluxe/Custom un-assembled wiring kit with four selected close tolerance 500k CTS pots. Comes with a standard L type toggle switch for Fender reissues and originals. Use set screw knobs only.
€58,33
including VAT 19% , [plus shipping]
Qty
Wiring Kit 72 Tele Deluxe/Custom WK-72-S
This is a 1972 Fender Tele Deluxe/Custom un-assembled wiring kit with four selected close tolerance 500k CTS pots. Comes with a short straight toggle switch for newer aftermarket bodies that won't accept L-type switches. Use set screw knobs only.
€58,33
including VAT 19% , [plus shipping]
Qty
Wiring Kit ES-335 Kit WK-ES335
This is an un-assembled standard Gibson ES-335 style kit designed specifically for semi hollow body guitars. It comes stock with selected CTS vintage taper guitar potentiometers. It fits most ES-335 style copies and originals.
€104,72
including VAT 19% , [plus shipping]
Qty
Wiring Kit ES-335 Kit WK-ES335-DELUXE
This is an un-assembled premium deluxe Gibson ES-335 style kit designed specifically for semi hollow body guitars. It comes stock with selected Bourns Model 95 Premium guitar potentiometers. It fits most ES-335 style copies and originals.
€78,54
including VAT 19% , [plus shipping]
Qty
Wiring Kit Jazz Bass Kit WK-JB
This is an un-assembled premium deluxe Jazz Bass style wiring kit using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers.
€26,18
including VAT 19% , [plus shipping]
Qty
Wiring Kit Les Paul Kit WK-LP-LONG
This is an un-assembled premium deluxe wiring kit for Les Paul guitars, using the best, selected parts. It comes stock with selected long shaft CTS Premium guitar potentiometers. It will fit Les Paul style guitars with thicker tops.
€65,45
including VAT 19% , [plus shipping]
Qty
Wiring Kit Les Paul Kit WK-LP-SHORT
This is an un-assembled premium deluxe wiring kit for Les Paul guitars, using the best, selected parts. It comes stock with selected standard shaft CTS Premium guitar potentiometers. It will fit Les Paul style guitars with thinner tops.
€65,45
including VAT 19% , [plus shipping]
Qty
Wiring Kit Precision Bass Kit WK-PB
This is an un-assembled premium deluxe wiring kit for Precision Bass guitars, using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers.
€19,64
including VAT 19% , [plus shipping]
Qty
Wiring Kit SG Kit WK-SG
This is an un-assembled premium deluxe wiring kit for SG guitars, using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers.
€65,45
including VAT 19% , [plus shipping]
Qty
Wiring Kit Strat Kit WK-Strat-Blender
This is an un-assembled premium deluxe wiring kit for Strat style guitars, using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers. The Blender wiring kit uses one volume, one master tone, and one blender potentiometer. In the neck position you can blend the bridge pickup in to varying degrees. In the bridge position you can blend the neck pickup in to varying degrees. In positions two and four all three pickups are on at once.
€40,58
including VAT 19% , [plus shipping]
Qty
Wiring Kit Strat Kit WK-Strat-HSS
This is an un-assembled premium deluxe wiring kit for Strat style guitars with one humbucker and two singlecoils, using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers. It uses a master volume, shared tone control for the neck and middle pickups, and a tone control for the bridge pickup. 500k pots give the humbucker the correct load and we use a resistor on the single coils to give them the correct 250k load so there is no compromise mixing single coils with humbuckers.
€52,36
including VAT 19% , [plus shipping]
Qty
Wiring Kit Strat Kit WK-Strat-SSS
This is an un-assembled premium deluxe wiring kit for Strat style guitars with three singlecoils, using the best, selected parts. It comes stock with selected CTS Premium guitar potentiometers. It uses a master volume, tone control for the neck pickup, and a shared tone control for the middle and bridge pickups.
€40,58
including VAT 19% , [plus shipping]
Qty
Wiring Kit Tele Kit WK-Tele-3-way
This is an un-assembled premium deluxe 3-way wiring kit for Tele style guitars. It uses a custom 3-way switch to give you standard Tele switching features with 1 volume and 1 tone.
€39,27
including VAT 19% , [plus shipping]
Qty
Wiring Kit Tele Kit WK-Tele-4-way
This is an un-assembled premium deluxe 4-way wiring kit for Tele style guitars. It uses a custom 4-way switch to give you a fat series humbucker tone in the 4th position while retaining the standard Tele switching functions in the other 3 positions.
€39,27
including VAT 19% , [plus shipping]
Qty
Wiring Kit Tele Kit WK-Tele-Custom
This is an un-assembled premium deluxe wiring kit for Tele Custom style guitars. It has been designed specifically with 500k pots for Telecasters with a humbucker or P-90 in the neck and a single coil in the bridge. It uses a 470k resistor in series with the single coil bridge pickup to give the single coil a 250k load, while giving the humbucker it's proper 500k load.
€39,27
including VAT 19% , [plus shipping]
Qty
Wooden Enclosure Maple
Beautiful wooden enclosure, made of maple. The inside has been shielded. Size (LxWxH): 114x62x35mm.
€32,13
including VAT 19% , [plus shipping]
Qty
Wooden Enclosure Walnut
Beautiful wooden enclosure, made of walnut. The inside has been shielded. Size (LxWxH): 114x62x35mm.
€33,74
including VAT 19% , [plus shipping]
Qty
Banzai Deluxe WahWah Pot
Long-life 200k wah pot with ICAR taper.
€19,75
including VAT 19% , [plus shipping]
Qty
Banzai Fireball Overdrive 3
We are proud to present the new Fireball that will change the standard for professional overdrive pedals. With a singing tone, harmonic balance and raw power, it allows you to capture every nuance of your playing style whether you're in the studio or on the stage.
€226,10
including VAT 19% , [plus shipping]
Qty
Banzai Cold Fusion Overdrive
Very powerful clean boost and overdrive pedal.
Provides absolutely linear clean boost and transparent, tubey overdrive sounds.
€245,18
including VAT 19% , [plus shipping]
Qty
 
The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.