Haussel

The 1959-B Custom + is a hot, wrapped 1959-B at around 11k. It has other steel pins that make it sound a bit more transparent and direct in the highs, it's tone goes in the direction of VIN + B A5 without losing the PAF character.

The 1959-B Custom + is a hot, wrapped 1959-B at around 11k. It has other steel pins that make it sound a bit more transparent and direct in the highs, it's tone goes in the direction of VIN + B A5 without losing the PAF character.

The 1959-B Custom + is a hot, wrapped 1959-B at around 11k. It has other steel pins that make it sound a bit more transparent and direct in the highs, it's tone goes in the direction of VIN + B A5 without losing the PAF character.

The 1959-B Custom + is a hot, wrapped 1959-B at around 11k. It has other steel pins that make it sound a bit more transparent and direct in the highs, it's tone goes in the direction of VIN + B A5 without losing the PAF character.

The 1959-B is the matching bridge pickup, together with the 1959-N the classic PAF sound is created. He has about 8.4k

The 1959-B is the matching bridge pickup, together with the 1959-N the classic PAF sound is created. He has about 8.4k

The 1959-N is the neck version with approx. 7.5k resistance, available in different versions. Classic PAF sound.

The 1959-N Custom is a weaker wound version of the 1959-N, it has approx. 6.9k resistance and an Alnico2 magnet, and other steel pins, this makes it's sound a bit clearer and silky, it is between the 1959-N and the VIN-N-A2.

The 1959-N Custom is a weaker wound version of the 1959-N, it has approx. 6.9k resistance and an Alnico2 magnet, and other steel pins, this makes it's sound a bit clearer and silky, it is between the 1959-N and the VIN-N-A2.

The 1959-N Custom is a weaker wound version of the 1959-N, it has approx. 6.9k resistance and an Alnico2 magnet, and other steel pins, this makes it's sound a bit clearer and silky, it is between the 1959-N and the VIN-N-A2.

The 1959-N Custom is a weaker wound version of the 1959-N, it has approx. 6.9k resistance and an Alnico2 magnet, and other steel pins, this makes it's sound a bit clearer and silky, it is between the 1959-N and the VIN-N-A2.

The 1959-N is the neck version with approx. 7.5k resistance, available in different versions. Classic PAF sound.

The 1959-N is the neck version with approx. 7.5k resistance, available in different versions. Classic PAF sound.

Bridge pickup with asymmetrically wound coils. In connection with Alnico 3 and special winding wire, it makes for an absolutely creamy tone. Creamy, warm, and always clear and open.

Bridge pickup with asymmetrically wound coils. In connection with Alnico 3 and special winding wire, it makes for an absolutely creamy tone. Creamy, warm, and always clear and open.

Bridge pickup with asymmetrically wound coils. In connection with Alnico 3 and special winding wire, it makes for an absolutely creamy tone. Creamy, warm, and always clear and open.

The Classic-N is a neck pickup with asymmetrically wound bobbins, the connection with Alnico 3 and special winding wire ensure an absolutely creamy tone. Creamy, warm, and always clear and open.

The Classic-N is a neck pickup with asymmetrically wound bobbins, the connection with Alnico 3 and special winding wire ensure an absolutely creamy tone. Creamy, warm, and always clear and open.

The Classic-N is a neck pickup with asymmetrically wound bobbins, the connection with Alnico 3 and special winding wire ensure an absolutely creamy tone. Creamy, warm, and always clear and open.

Black. 4-conductor pickup cable. Base plate made of German Silver. Spacing 51mm. 3x Ceramic magnets.

Perl. 4-conductor pickup cable. Base plate made of German Silver. Spacing 51mm. 3x Ceramic magnets.

The Hot-B has a higher output than the VIN + B, and therefore significantly more mids, but without the dreaded middle nose. It sounds very bluesy, but without losing it's definition.

The Hot-B has a higher output than the VIN + B, and therefore significantly more mids, but without the dreaded middle nose. It sounds very bluesy, but without losing it's definition.

The Hot-B has a higher output than the VIN + B, and therefore significantly more mids, but without the dreaded middle nose. It sounds very bluesy, but without losing it's definition.

The HOT-N is the matching neck PU for the HOT-B, a strong, bluesy neck pickup, with well-measured mids and good output, always transparent and clear.

The HOT-N is the matching neck PU for the HOT-B, a strong, bluesy neck pickup, with well-measured mids and good output, always transparent and clear.

The HOT-N is the matching neck PU for the HOT-B, a strong, bluesy neck pickup, with well-measured mids and good output, always transparent and clear.

JB-Replacement 4-string pickups suitable for all common millings, neck and bridge PU are matched to one another and connected together without hum, all PUs are completely shielded with copper foil and waxed under vacuum. The connection cable is shielded with 2 wires. The supplied screws are made of stainless steel.

JB-Replacement 4-string pickups suitable for all common millings, neck and bridge PU are matched to one another and connected together without hum, all PUs are completely shielded with copper foil and waxed under vacuum. The connection cable is shielded with 2 wires. The supplied screws are made of stainless steel. The prices given are set prices!

JB-Replacement 4-string pickups suitable for all common millings, neck and bridge PU are matched to one another and connected together without hum, all PUs are completely shielded with copper foil and waxed under vacuum. The connection cable is shielded with 2 wires. The supplied screws are made of stainless steel. The prices given are set prices!

Haussel JB pickups Setzer . Together with the extraordinary bassist Markus Setzer and the master luthier from Finland, Juha Ruokangas, we have succeeded in developing a set for JB that sounds a bit clearer and more transparent, without losing the easy response and the well-known Haussel JB sound.

JB-Replacement 4-string pickups suitable for all common millings, neck and bridge PU are matched to one another and connected together without hum, all PUs are completely shielded with copper foil and waxed under vacuum. The connection cable is shielded with 2 wires. The supplied screws are made of stainless steel.

JB-Replacement 4-string pickups suitable for all common millings, neck and bridge PU are matched to one another and connected together without hum, all PUs are completely shielded with copper foil and waxed under vacuum. The connection cable is shielded with 2 wires. The supplied screws are made of stainless steel.

The Haussel 5-string pickups are made with large MM style Alnico 5 magnets.

The Haussel 5-string pickups are made with large MM style Alnico 5 magnets.

4-string Version des Haussel- PBass Pickups.

4-string Version des Haussel- PBass Pickups.

4-string Version des Haussel- PBass Pickups.

4-string Version des Haussel- PBass Pickups.

4-string PBass pickup with large 9.5mm magnets for more punch, bass and treble.

4-string PBass pickup with large 9.5mm magnets for more punch, bass and treble.

The bridge version of the P90-1953 has approx. 12-15% less winding than the 1956, making it a bit lighter and lighter in tone, neck and bridge coordinated, degauss the Alnico5 magnet.

The bridge version of the P90-1953 has approx. 12-15% less winding than the 1956, making it a bit lighter and lighter in tone, neck and bridge coordinated, degauss the Alnico5 magnet.

The bridge version of the P90-1953 has approx. 12-15% less winding than the 1956, making it a bit lighter and lighter in tone, neck and bridge coordinated, degauss the Alnico5 magnet.

The neck version of the P90-1953 has approx. 12-15% less winding than the 1956, therefore a bit lighter and lighter in tone, very weak Alnico5 magnet.

The neck version of the P90-1953 has approx. 12-15% less winding than the 1956, therefore a bit lighter and lighter in tone, very weak Alnico5 magnet.

The neck version of the P90-1953 has approx. 12-15% less winding than the 1956, therefore a bit lighter and lighter in tone, very weak Alnico5 magnet.

The sound of the P90-1956 is matched to the neck version, ie it has a little more windings, weaker Alnico5 magnets, the set is matched, the tapped version corresponds to the 1953-B.

The sound of the P90-1956 is matched to the neck version, ie it has a little more windings, weaker Alnico5 magnets, the set is matched, the tapped version corresponds to the 1953-B.