Goeldo

Goeldo Deluxe 500k log potentiometer, 24mm. Knurled split shaft. Heavy duty construction, smooth-running with low friction. Tinned housing for easy soldering. Thread length: 10mm. Thread diameter: 8mm.

Goeldo Barrel style Jack, stereo. Nickel. 6.3mm for side mounting, hole of 2mm, including washer & nut. Contacts fastened in fibre nuts!

Goeldo Barrel style Jack, stereo. Black Chrome. 6.3mm for side mounting, hole of 2mm, including washer & nut. Contacts fastened in fibre nuts!

Excenter Bushings for Jazzmaster /Jaguar style bridges. 9mm nickel.

Excenter Bushings for Jazzmaster /Jaguar style bridges. 8mm nickel.

The elegant solution for any string spacings and numbers of strings for your special bass. Housing made of zinc, brass saddles. Dimensions 60mm x 15.4mm, string spacing at the bridge min. 15.5mm, lowest possible action above body top 9.5mm. Incl. screws and allen key. - Sold individually! Black.

Chrome. High-grade brass knob for potentimeters with 6mm shaft. Knurled side, with marker notch. M4 fastening screw. Diameter: 18mm. Height: 14,5mm.

Goeldo Barrel style Jack, stereo. Gold. 6.3mm for side mounting, hole of 2mm, including washer & nut. Contacts fastened in fibre nuts!

The Goeldo tremolo for offset guitars is not a copy of the Fender system, but can replace it 1:1 without milling, drilling and modifications. It offers all the advantages of the new Goeldo DG1 tremolo series: butter-smooth movement in 'up & down' operation and an in all dimensions settable and elegantly shaped tremolo arm with safe, adjustable zero point. A true alternative! Nickel/Chrome.

Great vintage look and safe as houses! The security cap is screwed into the strap pin. Diameter. 12/17mm. Compatible with the Duesenberg Drop-Stop system (EPDSB/G/N). One pair. Chrome.

The new tremolo generation! DG tremolo system in an ultra-small design and all the advantages of the goeldo DG series: butter-smooth operation in 'up & down' modes and an elegantly shaped round tremolo arm with safe, settable zero point, adjustable in all dimensions. A true alternative! Classic vintage look in the appealing style of the Fifties: the chromed T-shaped base meets a nickel-plated tremolo system.

Goeldo Deluxe 250k log No-Load potentiometer, 24mm. When turned up fully, the signal is routed to the output without being influenced by the tone potentiometer. The result is more highs than usual and a great directness! Knurled split shaft. Heavy duty construction, smooth-running with low friction. Tinned housing for easy soldering. Thread length: 10mm. Thread diameter: 8mm.

Goeldo Deluxe 250k lin potentiometer, 24mm. Knurled split shaft. Heavy duty construction, smooth-running with low friction. Tinned housing for easy soldering. Thread length: 10mm. Thread diameter: 8mm.

Goeldo Side Dots. 2mm Plastic rods for creating position dots on the fingerboard's edge. Insert, cut off and sand over lightly. Cream. 4 pcs with Length: 50mm. Diameter: 2.0mm

Deluxe Toggle Switch. 3-way. Nickel. Long-life model due to gold-plated contacts.

Chrome. High-grade brass knob for potentimeters with 6mm shaft. Knurled side, with marker notch. M4 fastening screw. Diameter: 22mm. Height: 15mm.

Chrome. Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Goeldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Tune-o-Matic style vintage design bridge. The string saddles are equipped with small rollers which is perfect for guitars with tremolo. One-piece height adjustment posts (M4). Chrome.

Better in tune with a Telecaster! Uncarved brass saddles, slightly angled for scale compensation.

Nickel. High-grade brass knob for potentimeters with 6mm shaft. Knurled side, with marker notch. M4 fastening screw. Diameter: 22mm. Height: 15mm.

Goeldo's version of the classic 3-way switch, but with gold-anodized solder pins. Very heavy duty!

Goeldo 'Slim J.' Fret Wire WS012. 25 pieces, 7cm length. Large/Jumbo. Nickel silver alloy with high hardness (approx. 160Hv). Size: 2,3x1,3mm.

Nickel. Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360 degrees rotatable round lever is adjustable in length, response, position and movement. It couldn't be better! Length: 102mm Width: 85mm.

Goeldo Vintage Bone Nut. Fstyle 48 x 7 x 3,3mm.

Nickel. M3 screws, width approx. 11mm, Set of 6.

A great set of different self adhesive Copper foils (sheet & stripes), some wire and solder to shield Pickguards, Pickups and electric cavities. Comes with instructions.

Ultra-compact, very lightweight stereo output jack for 6,3mm (1/4 inch) jack plugs. The contacts are surrounded by a plastic sleeve. Installation depth incl. connections 30mm, diameter of the sleeve 15mm.

Nickel. Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Great vintage look and safe as houses! The security cap is screwed into the strap pin. Diameter. 12/17mm. Compatible with the Duesenberg Drop-Stop system (EPDSB/G/N). One pair. Black.

Solid straight bridge for lapsteel guitars, which is fixed directly to the guitar top with three screws. Size: 70x10x10mm, string spacing: 52mm. Nickel.

Fillister head screws for humbucker bobbins and P90 pickups. Dimensions: 3 x 18mm. Pack of 12 pieces. Gold.

Each string rider rests on only three points: a perfectly stable construction, which offers the best basis for a firmly articulated, sustain-rich sound, because no component tilts or rattles! The string riders themselves are made of rustproof stainless steel - perfect for the sound and against string breaking! Gold.

Non-magnetized pole pieces for humbuckers. Nickel. Size: 4,9 x 12,5mm. Package contains 12 pieces.

DPDT on/on/on toggle switch. Chrome. 12mm hole diameter.

Nickel. Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Each string rider rests on only three points: a perfectly stable construction, which offers the best basis for a firmly articulated, sustain-rich sound, because no component tilts or rattles! The string riders themselves are made of rustproof stainless steel - perfect for the sound and against string breaking! Nickel.

Goeldo Duro Nut for guitar Duro Nut nuts are made of bone-like synthetic material, have excellent sound characteristics, are visually appealing and are easy to work with. For 6-string acoustic and electric guitars 43 x 5 x 9mm.

Chrome. High-grade brass knob for potentimeters with 6mm shaft. Knurled side, with marker notch. M4 fastening screw. Diameter: 18mm. Height: 18,5mm.

Goeldo Trussrod Nut. Nut driver size: 7mm. Gibson-Type brass nut for trussrods. US Thread.

Goeldo Vintage Bone Nut. Jumbo 55 x 10 x 6,5mm.

Downholder is mounted 1:1 in the existing mounting holes of the Stop tailpiece and allows the installation of a larger trem system without pressure roller, whereby it brings the strings with sufficient pressure to the level of the bridge. With this combination Downholder/trem system without pressure roller, any guitar with Stop tailpiece can be transformed into a well-functioning tremolo guitar without having to modify anything on the wood or hardware.

Gold. Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Chrome. Trem system for Fender Jazzmaster, Jaguar und similar guitars. With a push in arm.

Vintage-Style bridge with pressed steel saddles. String spacing 54mm. Chrome.

White pickup cover for Jazzmaster guitars. String spacing E1-E6: 52mm. Set contains two pieces.

Goeldo Vintage Bone Nut / Standard Raw material for custom bone nuts. Unbleached super hard Argentinian cow bone. G style 55 x 10 x 5mm.

Non-magnetized pole pieces for humbuckers. Gold. Size: 4,9 x 12,5mm. Package contains 12 pieces.

Goeldo wrap around tailpiece. Chrom. The new wrapper tailpiece is made of lightweight aluminum and the strings are traditionally inserted through the tailpiece from behind.

Goeldo 'Slim J.' Fret Wire WS212. 1 piece, 24cm length. Large/Jumbo. Nickel silver alloy with high hardness (approx. 160Hv). Size: 2,3x1,3mm.