Goeldo

Goeldo 'Modern Vintage' Neck, Stratocaster shape, Finished, 12 inch . Maple.

Goeldo 'Modern Vintage' Neck, Telecaster style, Unfinished, 12 inch . The Goeldo 'Modern Vintage' Necks deliver great playability through a modern 12 inch fretboard radius paired with a vintage look. Maple.

Goeldo JB-Shape Hals, Unfinished, 9,5 inch, 4-string maple neck with rosewood fingerboard, 20 jumbo frets, scale 864mm, 34 inch .

Goeldo 'Modern Vintage' Neck, Stratocaster shape, Half-Paddle, Unfinished. 'Modern Vintage' Neck featuring a Half-Paddle preshaping for your own headstock designs. Rosewood fretboard.

Goeldo Vintage Style Neck, Stratocaster shape, Finished, 7,25 inch . Maple.

Goeldo Vintage Style Neck, Stratocaster shape, Unfinished, 7,25 inch . Goeldo Vintage-Spec Neck with traditional 7,25 inch fretboard radius, 21 frets and medium D shaping.

Goeldo 22-Fret Neck, Stratocaster shape, Finished, 12 inch . Extended Neck for Stratocaster shape guitars featuring 22 frets and a 12 inch fretboard radius. Rosewood.

Goeldo Vintage Style Neck, Telecaster shape, Finished, 7,25 inch . Rosewood.

To protect unpainted wood surfaces. The final sanding should be done with 2 sheets of fine sandpaper. The Oil and Wax mixture is applied several times in succession until the wood stops absorbing it. Later, the wax remaining on the surface is brushed into the last open pores. For permanent protection, an occasional after-treatment of the wood surface is essential. For more detailed information, please refer to the instructions supplied.

Fillister head screws for humbucker bobbins and P90 pickups. Dimensions: 3 x 18mm. Pack of 12 pieces. Gold.

Goeldo Side Dots. 2mm Plastic rods for creating position dots on the fingerboard's edge. Insert, cut off and sand over lightly. Black 4 pcs. Length: 50mm Diameter: 2.0mm

Goeldo Side Dots. 2mm Plastic rods for creating position dots on the fingerboard's edge. Insert, cut off and sand over lightly. White, 4 pcs. Length: 50mm. Diameter: 2.0mm

Goeldo SilverFoil PSGFNN Neck pickup. This singlecoil pickup sounds extremely open and brilliant with powerful output. Standard humbucker dimensions of 68.40 x 37.20 mm (without cap), open nickel silver cap with Silver foil underneath and 2-wire shielded connecting cable.

Chrome. Steel saddles for Fender-style bridges, 10.8mm, 6 pieces.

Aged Nickel. M3 screws, width approx. 11mm, Set of 6.

Goeldo Tremolo Steel Block. Should fit all vintage replica tremolos. A good investment for Sound!

DG-Tremolo-System for mounting on hollowbody guitars with all the advantages of the goeldo DG-series: butter smooth action in 'up & down' mode and an in all dimensions adjustable and stylish shaped round tremolo arm with secure adjustable zero point. Total length: 140mm (front edge to side bend).

The new tremolo generation! DG tremolo system in an ultra-small design and all the advantages of the goeldo DG series: butter-smooth operation in 'up & down' modes and an elegantly shaped round tremolo arm with safe, settable zero point, adjustable in all dimensions. A true alternative! Classic vintage look in the appealing style of the Fifties: the chromed T-shaped base meets a nickel-plated tremolo system.

Aluminum. Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360 degrees rotatable round lever is adjustable in length, response, position and movement. It couldn't be better! Length: 102mm Width: 85mm.

Aluminum. Lefthand. Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360 degrees rotatable round lever is adjustable in length, response, position and movement. It couldn't be better! Length: 102mm Width: 85mm.

Nickel. Lefthand. Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360 degrees rotatable round lever is adjustable in length, response, position and movement. It couldn't be better! Length: 102mm Width: 85mm.

Aluminum. Inspired by the Duesenberg TDRLN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360 degrees rotatable round lever is adjustable in length, response, position and movement. It couldn't be better! Length: 176mm Width: 85mm

Downholder is mounted 1:1 in the existing mounting holes of the Stop tailpiece and allows the installation of a larger trem system without pressure roller, whereby it brings the strings with sufficient pressure to the level of the bridge. With this combination Downholder/trem system without pressure roller, any guitar with Stop tailpiece can be transformed into a well-functioning tremolo guitar without having to modify anything on the wood or hardware.

Gold. Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Chrome. Lefthand. Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Nickel. Lefthand. Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Gold. Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Goeldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Gold. Lefthand. Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Nickel. Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Aluminum. Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Aluminum. Lefthand. Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Nickel. Lefthand. Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the Les Trem won't fit!

Goeldo TMG1B Tremolo arm for göldo LT1 und TGD tremolo systems. Black. Size: (LxD): 190 x 6 mm.

Goeldo TMG1N Tremolo arm for göldo LT1 und TGD tremolo systems. Nickel. Size: (LxD): 190 x 6 mm.

Chrome. Trem system for Fender Jazzmaster, Jaguar und similar guitars. With a push in arm.

Goeldo Trussrod Nut. Nut driver size: 7mm. Gibson-Type brass nut for trussrods. US Thread.

Chrome. A classic Trem system, made exactly according to the original from the 50's. With a zinc block and pressed steel string saddles of historically accurate design. Sunk holes on top of base plate. Screwed tremolo arm and six attachment holes. All tremolos come complete with arm, springs, spring holder, screws and allen wrenches!

Chrome. A classic Trem system, made exactly according to the original from the 50's. With a steel block and pressed steel string saddles of historically accurate design. Sunk holes on top of base plate. Screwed tremolo arm and six attachment holes. All tremolos come complete with arm, springs, spring holder, screws and allen wrenches!

Goeldo Vintage Bone Bridge Inlay. 85 x 12 x 3,2mm.

Goeldo Vintage Bone Bridge Inlay. 90 x 12 x 2,5mm.

Goeldo Vintage Bone Bridge Inlay. 105 x 12 x 4mm.

Goeldo Vintage Bone Nut / Slide-Guitar Extension. 15 x 5 x 53mm.

Goeldo Vintage Bone Nut / Standard Raw material for custom bone nuts. Unbleached super hard Argentinian cow bone. G style 55 x 10 x 5mm.

Goeldo Vintage Bone Nut. Jumbo 55 x 10 x 6,5mm.

Non-magnetized pole pieces for humbuckers. Nickel. Size: 4,9 x 12,5mm. Package contains 12 pieces.

The angle of each of the 6 tailpiece "fingers" can be adjusted individually for optimal string pressure. Length 16.5cm. Nickel.

Chrome. The big bridge with steel base plate and brass saddles, 4-string.

Rosewood. For Tunamatic bridges on Jazz guitars.

Hex into Hex' Tailpiece Lock Studs are the genius solution! They allow the tailpiece to be locked safely onto the unstringed guitar. Gold.