GNA Components

GNA low cost replacement tuners for electrical and western guitars. Large edgy peg.
3 left, 3 right, chrome.

Reliable instrument stand for one instrument with foam material cushioning and neck locking mechanism. Height can be adjusted. Stable construction. Black.

GNA pickguard. Strat style. Black. 11-hole. 3 ply (b/w/b). Standard cutout.

GNA tremolo arm. Standard shape. Chrome with black tip. Screw-on (M6 thread).

GNA pickguard. Strat style. Black. 11-hole. 3 ply (b/w/b). HSS pickup cutouts.

On-Off-On slide switch, made by GNA Components. White actuator. Replacement for Mustang-style guitars. M3-0.5P thread.

Bell shaped knob, made of maple wood. 6mm split shaft axis. Push-on. Diameter: 24,5mm. Height: 18,5mm.

GNA bridge inlay. Made of bone. Dimensions: 83x10x3mm. Flat surface. For concert guitar.

Cover plate for electronics compartment in Les Paul style guitars. Black. 4-hole. 1 ply.

Backplate for Strat. Black. 3-ply (b/w/b).

Made of black plastic. Holds microphones of up to 25mm diameter.

GNA pickguard. T-style. Standard cutout. Black. 8-hole. 1 ply. Thickness: 2mm.

Skull knob, black/silver with clear eyes. 6mm split shaft axis. Push-on.

GNA pickguard. T-style. Standard cutout. Mint green. 8-hole. 3 ply (mnt/b/mnt).

GNA replacement tuners. Large kidney shaped peg. Screw hole angled at 45 degrees.
3 left, 3 right, chrome.

GNA guitar neck. T-type. Maple, one piece with skunk stripe. 21 vintage frets. Natural. With grove for nut. 6 holes for tuners predrilled (7mm).

Stereo endpin jack for musical instruments, Chrome.
Chrome plated. Encapsuled construction.

GNA tremolo arm. Standard shape. Black with black tip. Screw-on (M6 thread).

GNA pickguard. Strat style. Tortiose. 11-hole. 3 ply (t/w/b). Standard cutout.

Made of black plastic. Holds microphones of up to 22mm diameter.

Skull knob, brass with red eyes. 6mm split shaft axis. Push-on.

GNA pickguard. T-style. Standard cutout. White. 8-hole. 3 ply (w/b/w).

For Classical Guitar, unslotted. The Zero Glide Replacement Nut borrows the 'zero fret' concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It takes only a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire is included in multiple sizes.

Made of black rubber. Holds microphones of up to 28,5mm diameter.

GNA pickguard. Strat style. Black. 11-hole. 1 ply. Standard cutout.

GNA guitar neck. J-type. Maple, with rosewood fretboard. 21 medium frets. Natural. With grove for nut. 4 holes for tuners predrilled (15mm).

Toronzo bass guitar body. P-bass-type. Wood: Alder. Lacquer: none (unfinished). Pickup compartments: Standard (single coil). With Electronics compartment.

GNA pickguard. Strat style. White. 11-hole. 3 ply (w/b/w). Without pickup cutouts.

GNA tuners for bass guitar. 4 pieces. Encapsuled. Little metal pegs.
4 left, chrome.

Made of black plastic. Holds microphones of up to 28,5mm diameter.

Skull knob, silver with clear eyes. 6mm split shaft axis. Push-on.

For Gibson, slotted. The Zero Glide Replacement Nut borrows the 'zero fret' concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It takes only a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire is included in multiple sizes.

GNA pickguard screws, chrome. 100 Pieces.

Instrument stand for electric or acoustic guitars with foam material cushioning. Foldable to very small dimensions. Size is 19x6cm in folded position. Black.

GNA pickguard. Les Paul style. White. 2-hole. 1 ply. Standard HH cutout.

Toronzo guitar neck, made in Japan. S-type. Maple, one piece with skunk stripe. 22 vintage frets. Lacquer: none (natural, unfinished). With grove for nut. 6 holes for tuners predrilled (7mm).

GNA BR-1 concert guitar bridge. Width: 185mm, Depth: 28mm. Recess: 76x3x3mm.

Stop tailpiece studs and anchors. Set of 2 pieces. Fits Gibson

GNA pickguard. Jazz Bass style. Tortoise. 10-hole. 3 ply (t/w/b). Standard cutout.

For Banjo, slotted. The Zero Glide Replacement Nut borrows the 'zero fret' concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It takes only a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire is included in multiple sizes.

GNA western guitar bridge. Width: 153mm, Depth: 37mm. Recess: 76x3x3mm.

Humbucker pickup. Neck position. Black. Alnico magnets. Adjustable pole pieces. 2-conductor. Transparent, powerful sound. Ideal to improve the sound of beginners instruments or for repairs. Unbeatable price-quality ratio. Includes frame, screws and springs.

GNA pickguard. T-style. Standard cutout. Tortoise. 8-hole. 3 ply (t/w/b).

ES335 style pickguard. Black. 5-ply (B/W/B/W/B).

The Fret Shield is pushed between the strings and the fingerboard during transport or storage. Protects the frets, the fingerboard and the strings. Additionally, it controls the moisture content in the case thanks to its silicate crystal content! If required, the enclosed small indicator plate can be clamped onto the Fret Shield to indicate when the Fret Shield should be put back in the sun or on the heater to dry. Made in Japan.

GNA Standard 2-hole tremolo. Chrome. Massive saddles. Secured at two points. Includes screws, nuts, bolts, springs, clamp and tremolo arm.

GNA tuners for 12-string guitar. Little pegs. 6mm diameter. Hole distance: 25mm.
6 left, 6 right, chrome.

GNA pickguard. T-style. Standard cutout. White perloid. 8-hole. 3 ply (wpd/w/b).

4-Pole toggle switch On-On-On (12 terminals), with hardware. Made in Japan.