CTS

CTS 374061-103 slide potentiometer. 10K linear. Used on the famous Electro Harmonix 16 - Second Delay pedals.

CTS 442NA4H103CDN slide potentiometer. Used as Octave and Filter sliders on old Electro Harmonix POG effects pedals.

Custom made CTS 250k 'Dimple Back' potentiometer with a special No-Load Audio Taper. 6,0mm knurled split shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 1/4 inch (6,35mm).

CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 250k lin. Most commonly used in American amps and guitars. Smooth action - top quality!

Similar to the Fender No-Load potentiometer, but this has a dished back and there is no 'click-feel' between 9 and 10. Best used for true bypass control or blender guitar wiring. 250k log, 1/4 inch bushing length.

CTS potentiometer with metal axis. Includes nut and lockwasher. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 500k log. Most commonly used in American amps and guitars. Smooth action - top quality!

CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 1M log. Most commonly used in American amps and guitars. Smooth action - top quality!

CTS potentiometer with metal axis and dished back. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 6mm. 250k log.

CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 300k log. Most commonly used in American amps and guitars. Smooth action - top quality!

CTS potentiometer with metal axis and dished back. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 6mm. 500k log.

Long Life CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 250k log. 4 contacts to wafer for best reliability. Lifecycle rating: 250000 cycles. Smooth action - top quality!

CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Extra long thread bushing length: 19mm (3/4 inch). 250k lin. Most commonly used in American amps and guitars. Smooth action - top quality!

CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Extra long thread bushing length: 19mm (3/4 inch). 500k lin. Most commonly used in American amps and guitars. Smooth action - top quality!

High quality 500k log CTS potentiometer with Push-pull DPDT switch. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Perfect for phase switching, coil tapping, series/parallel, etc.

CTS 17mm stereo balance/blend linear taper potentiometer with center detent. Knurled split shaft. Includes nut and washer.
These high quality audio potentiometers made by CTS are suitable for use in both professional and consumer applications. The most popular applications are electric guitars, sound processing equipment, and sound system amplifiers.

CTS 17mm mono, audio taper potentiometer. Knurled split shaft. Includes nut and washer.
These high quality audio potentiometers made by Bourns are suitable for use in both professional and consumer applications. The most popular applications are electric guitars, sound processing equipment, and sound system amplifiers.

CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,3mm. Solid full shaft. Thread bushing length: 9,5mm (3/8 inch). 250k lin. Most commonly used in American amps and guitars. Smooth action - top quality!

CTS potentiometer with metal axis and extra long thread. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Extra long thread bushing length: 19mm (3/4 inch). 300k lin. Most commonly used in American amps and guitars. Smooth action - top quality!

Custom made CTS 10k log 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).

Custom made CTS 100k lin 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).

Custom made CTS 250k lin 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).

Custom made CTS 250k 'Dimple Back' potentiometer with a special Vintage Audio Taper (30% Log). 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 1-4 inch (6,4mm).

Custom made CTS 500k log 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).

Custom made CTS 1M log 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).

Custom made CTS 500k 'Dimple Back' potentiometer with a special Vintage Audio Taper (30% Log). 6,0mm knurled split shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).

CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,3mm. Solid full shaft. Thread bushing length: 9,5mm (3/8 inch). 1k log. Most commonly used in American amps and guitars. Smooth action - top quality!

CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,3mm. Solid full shaft. Thread bushing length: 9,5mm (3/8 inch). 10k log. Most commonly used in American amps and guitars. Smooth action - top quality!

CTS potentiometer with metal axis. Stacked concentric pot. Includes nut, lock and dress washer. Axis diameter: 4,6 / 6,6mm. Concentric full shaft. Thread bushing diameter: 9,5mm (3/8 inch). Thread length: 6mm. 500k log / 500k log. Most commonly used in American amps and guitars. Smooth action - top quality!

CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,3mm. Solid full shaft. Thread bushing length: 9,5mm (3/8 inch). 100k log. Most commonly used in American amps and guitars. Smooth action - top quality!

CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,3mm. Solid full shaft. Thread bushing length: 9,5mm (3/8 inch). 250k log. Most commonly used in American amps and guitars. Smooth action - top quality!

CTS Left-handed potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 500k log. Most commonly used in American amps and guitars. Smooth action - top quality!

CTS potentiometer with metal axis and extra long thread. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Extra long thread bushing length: 19mm (3/4 inch). 25k log. Most commonly used in American amps and guitars. Smooth action - top quality!

Most commonly used in American amps and guitars. Smooth action - top quality!

Most commonly used in American amps and guitars. Smooth action - top quality!

Most commonly used in American amps and guitars. Smooth action - top quality!

Most commonly used in American amps and guitars. Smooth action - top quality! SPST switched, 1/2 watt, 3/8 inch mounting, 1/4 inch knurled split aluminum shaft.

CTS 500k log sealed premium pot, special audio taper, 10% tolerance, split shaft.

High performance CTS pot with Ceramic Printed Element. Rotational life is ultra high at 100.000 cycles. Rugged metal shaft and bushing.

High performance CTS pot with Ceramic Printed Element. Rotational life is ultra high at 100.000 cycles. Rugged metal shaft and bushing.

High performance CTS pot with Ceramic Printed Element. Rotational life is ultra high at 100.000 cycles. Rugged metal shaft and bushing.

Compact CTS 18mm guitar pot with DPDT push-pull switch and 9,5mm bushing length. Special design specifically for use in guitars, reducing shaft wobble, ensuring low noise and providing exceptionally smooth rotational feel.

Compact CTS 18mm guitar pot with DPDT push-pull switch and 19,1mm bushing length. Special design specifically for use in guitars, reducing shaft wobble, ensuring low noise and providing exceptionally smooth rotational feel.

Compact CTS 18mm guitar pot with DPDT push-pull switch and 9,5mm bushing length. Special design specifically for use in guitars, reducing shaft wobble, ensuring low noise and providing exceptionally smooth rotational feel.

Compact CTS 18mm guitar pot with DPDT push-pull switch and 9,5mm bushing length. Special design specifically for use in guitars, reducing shaft wobble, ensuring low noise and providing exceptionally smooth rotational feel.

500 Ohm linear taper. High quality CTS potentiometers, 270 series. 16mm diameter, with pins. Bushing Information: Length: 1/4 inch (6.35mm), Thread Size: 1/4 inch-32, diameter: 1/4 inch (6.35mm). Shaft Information: Length: 1 inch (25.40mm) including bushing, Diameter: .125 inch (3.18mm)

1k log (audio) taper. High quality CTS potentiometers, 270 series. 16mm diameter, with pins. Bushing Information: Length: 1/4 inch (6.35mm), Thread Size: 1/4 inch-32, diameter: 1/4 inch (6.35mm). Shaft Information: Length: 1 inch (25.40mm) including bushing, Diameter: .125 inch (3.18mm)

5k linear taper. High quality CTS potentiometers, 270 series. 16mm diameter, with pins. Bushing Information: Length: 1/4 inch (6.35mm), Thread Size: 1/4 inch-32, diameter: 1/4 inch (6.35mm). Shaft Information: Length: 1 inch (25.40mm) including bushing, Diameter: .125 inch (3.18mm)

10k log (audio) taper. High quality CTS potentiometers, 270 series. 16mm diameter, with pins. Bushing Information: Length: 1/4 inch (6.35mm), Thread Size: 1/4 inch-32, diameter: 1/4 inch (6.35mm). Shaft Information: Length: 1 inch (25.40mm) including bushing, Diameter: .125 inch (3.18mm)

50k linear taper. High quality CTS potentiometers, 270 series. 16mm diameter, with pins. Bushing Information: Length: 1/4 inch (6.35mm), Thread Size: 1/4 inch-32, diameter: 1/4 inch (6.35mm). Shaft Information: Length: 1 inch (25.40mm) including bushing, Diameter: .125 inch (3.18mm)