Nuts and Washers

Spare part, swivel nut M7 with grip axle, chrome also for microphone stands

Switchcraft shouldered hex nuts for 3/8 inch -32 UNEF-2A threaded bushings. These nuts include a rubber grommet for use in sealed systems and also add a unique look to any build such as pedals or amplifiers. This nut is intended for panel or chassis thicknesses of 2,4 - 3,2mm. (0.095 - 0.125 inch).

Switchcraft shouldered hex nuts for 3/8 inch -32 UNEF-2A threaded bushings. These nuts include a rubber grommet for use in sealed systems and also add a unique look to any build such as pedals or amplifiers. This nut is intended for panel or chassis thicknesses of 1,27 - 2,3mm. (0.05 - 0.09 inch).

Angled solder terminal on a locking washing for 3/8 inch bushings. Perfect for adding chassis ground connections on switches, jacks, pots, and any other 3/8 inch bushing part. Pack contains 10 pieces.

Decorative ring nut M6.

Gold. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.

Carling dress nut for mini toggle switches. Thread: 1/4-40 UNS. This nut is not capped allowing the nut to thread past the top of the switch's bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look. Two sides are flatted for use with a tool when fastening.

Carling dress nut for footswitches. Black. These dress nuts are made of metal and feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with M12 bushings.

Threaded through wide dress nut for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch's bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting.

Black Nickel. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.

Hexagonal, plated steel nut for Cliff UK jacks. This nut fits Cliff jacks with 7/16 inch UNF, 20 TPI threading.

High quality nylon M3 flat washers. Set contains 10 pieces. These durable washers fit perfectly on M3 threaded screws. The small outside diameter provides a clean look beneath the head of the screw.

Indicator washer, gold. 90 degrees angled indicator tip. Commonly used with potentiometers as indicator mark. Makes finding the correct settings easy.

Carling dress nut for footswitches. Red. These dress nuts are made of durable plastic and feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is not capped so they can thread past the top of the bushing. These fit any 15/32-32UNS bushing but can also work with M12 bushings.

Nickel. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.

Cage nut M6.

M12 vintage style round nut, nickel. Inch thread. Commonly used with switches or with thick top guitars.

Switchcraft shoulder washer for 3/8 inch (9,5mm) bushings. Perfect for insulating metal bushings from the chassis. Minimum chassis hole diameter of 0.44 inch (11mm) required to accommodate the shoulder.

Larger threaded black Bananut for mounting potentiometers or other hardware with M7 bushings. These nuts look great beneath smaller sized knobs. Black.

Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Blue.

Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Orange.

Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Red.

Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code. These nuts are great for color-coding jacks or color-theming modules. Sold individually. Yellow.

Chrome. High quality plated 3/8 inch nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The 3/8 inch -32 UNEF-2A threading fits many 3/8 inch bushing parts such as Switchcraft 1/4 inch jacks and CTS pots.

Hex Nut M10x0,75. High type. Made of zinc plated steel. M 10x0,75.

Black Nylon flat washer for use with foot switches. This washer is M12 size and fits both metric (M12) and imperial (15/32) bushings for compatibility with the vast majority of foot switches.

Polyamid shoulder Washer. Inner Diameter: 12,2mm. Outer Diameter: 25,0mm.

Cage nut M5.

Switchcraft rigid plastic washer for 3/8 inch (9,5mm) bushing. Brown. Perfect for insulating metal bushings from the chassis.

Headless screw M3, length 6mm. Polyamid 6.6 natural color.

Hex nut BM12x1,5

custom made for Banzai
can be used with footswitches and other devices
thickness: 0,2mm

custom made for Banzai
can be used with footswitches and other devices

M9 washer, gold. Commonly used with audio jacks.

M12 hex nut, gold. Commonly used with switches. M12.0-1.00P.

M9 hex nut, gold. Commonly used with jacks.

Double thick decorative nut. M12 size.

M9 hex nut, black. Commonly used with jacks.

Cheese head screw, stainless steel. M6 x 10mm. Used for example on the Mundorf Mlytic caps.

Hex nut for 1/4 inch switchcraft jacks.

Headless screw M3, length 4mm. Black.

Keystone Hardware. Shoulder Washer. Inner Diameter: 3mm. Outer Diameter: 6,5mm.

Beautiful american style wing nut M3.

When you are using an M8 pot with a 3/8 inch hole or control plate, then this rubber ring will help to keep the pot aligned safely in the middle.

Cheese head screw, stainless steel. M6 x 10mm. Used for example on the Mundorf Mlytic caps.

M10 hex nut, nickel. Commonly used with potentiometers.

Stainless Steel internal tooth lockwasher for 1/4-inch Switchcraft Jacks.

heavy duty look for your pedal
custom made for Banzai

General purpose nut, M10.