CAP for CTS slider pots
Cap For Micro-Synth and POG Slide Pots
€2,68
including VAT
19%
, [plus shipping]
CTS 1k lin 5W
CTS 1k lin Wirewound potentiometer, 5W. Tolerance: 20%. 6,35mm full shaft, solder lugs
€6,59
including VAT
19%
, [plus shipping]
CTS 374061-103
CTS 374061-103 slide potentiometer. 10K linear. Used on the famous Electro Harmonix 16 - Second Delay pedals.
€19,04
including VAT
19%
, [plus shipping]
CTS 442NA4H103ABN
CTS 442NA4H103ABN slide potentiometer. Used as Input slider on old Electro Harmonix POG effects pedals.
€19,04
including VAT
19%
, [plus shipping]
CTS 442NA4H103CDN
CTS 442NA4H103CDN slide potentiometer. Used as Octave and Filter sliders on old Electro Harmonix POG effects pedals.
€19,04
including VAT
19%
, [plus shipping]
CTS 442NA4H104CDN
CTS 442NA4H104CDN slide potentiometer. 100K linear. Used on the '90s re-issue Electro Harmonix Micro-Synth pedals.
€11,90
including VAT
19%
, [plus shipping]
CTS Dimple KN-250k log-No Load
Custom made CTS 250k 'Dimple Back' potentiometer with a special No-Load Audio Taper. 6,0mm knurled split shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 1/4 inch (6,35mm).
€8,95
including VAT
19%
, [plus shipping]
CTS MTL-STD-250k lin
CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 250k lin. Most commonly used in American amps and guitars. Smooth action - top quality!
€5,40
including VAT
19%
, [plus shipping]
CTS MTL-STD-250k log
CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 250k log. Most commonly used in American amps and guitars. Smooth action - top quality!
€5,40
including VAT
19%
, [plus shipping]
CTS Blender Pot 250k
Similar to the Fender No-Load potentiometer, but this has a dished back and there is no 'click-feel' between 9 and 10. Best used for true bypass control or blender guitar wiring. 250k log, 1/4 inch bushing length.
€10,38
including VAT
19%
, [plus shipping]
CTS MTL-STD-500k lin
CTS potentiometer with metal axis. Includes nut and lockwasher. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 500k lin. Most commonly used in American amps and guitars. Smooth action - top quality!
€5,40
including VAT
19%
, [plus shipping]
CTS MTL-STD-500k log
CTS potentiometer with metal axis. Includes nut and lockwasher. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 500k log. Most commonly used in American amps and guitars. Smooth action - top quality!
€5,40
including VAT
19%
, [plus shipping]
CTS MTL-STD-1M lin
CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 1M lin. Most commonly used in American amps and guitars. Smooth action - top quality!
€8,13
including VAT
19%
, [plus shipping]
CTS MTL-STD-1M log
CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 1M log. Most commonly used in American amps and guitars. Smooth action - top quality!
€8,96
including VAT
19%
, [plus shipping]
CTS MTL-DISHED-250k lin
CTS potentiometer with metal axis and dished back. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 6mm. 250k lin.
€6,45
including VAT
19%
, [plus shipping]
CTS MTL-DISHED-250k log
CTS potentiometer with metal axis and dished back. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 6mm. 250k log.
€6,45
including VAT
19%
, [plus shipping]
CTS MTL-STD-250k log No Load
CTS No-Load potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 250k log. Most commonly used in American amps and guitars. Smooth action - top quality!
€5,40
including VAT
19%
, [plus shipping]
CTS MTL-STD-300k log
CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 300k log. Most commonly used in American amps and guitars. Smooth action - top quality!
€5,40
including VAT
19%
, [plus shipping]
CTS MTL-DISHED-500k lin
CTS potentiometer with metal axis and dished back. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 6mm. 500k lin.
€6,45
including VAT
19%
, [plus shipping]
CTS MTL-DISHED-500k log
CTS potentiometer with metal axis and dished back. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 6mm. 500k log.
€6,45
including VAT
19%
, [plus shipping]
CTS MTL-STD-500k log No Load
CTS No-Load potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 500k log. Most commonly used in American amps and guitars. Smooth action - top quality!
€5,40
including VAT
19%
, [plus shipping]
CTS MTL-STD-LL-250k log
Long Life CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 250k log. 4 contacts to wafer for best reliability. Lifecycle rating: 250000 cycles. Smooth action - top quality!
€8,72
including VAT
19%
, [plus shipping]
CTS MTL-STD-LL-500k log
Long Life CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Thread bushing length: 9,5mm (3/8 inch). 500k log. 4 contacts to wafer for best reliability. Lifecycle rating: 250000 cycles. Smooth action - top quality!
€8,72
including VAT
19%
, [plus shipping]
CTS MTL-XL-250k lin
CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Extra long thread bushing length: 19mm (3/4 inch). 250k lin. Most commonly used in American amps and guitars. Smooth action - top quality!
€9,58
including VAT
19%
, [plus shipping]
CTS MTL-XL-250k log
CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Extra long thread bushing length: 19mm (3/4 inch). 250k log. Most commonly used in American amps and guitars. Smooth action - top quality!
€7,01
including VAT
19%
, [plus shipping]
CTS MTL-XL-500k lin
CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Extra long thread bushing length: 19mm (3/4 inch). 500k lin. Most commonly used in American amps and guitars. Smooth action - top quality!
€9,58
including VAT
19%
, [plus shipping]
CTS DPDT-250k log
High quality 250k log CTS potentiometer with Push-pull DPDT switch. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Perfect for phase switching, coil tapping, series/parallel, etc.
€13,16
including VAT
19%
, [plus shipping]
CTS DPDT-500k log
High quality 500k log CTS potentiometer with Push-pull DPDT switch. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Perfect for phase switching, coil tapping, series/parallel, etc.
€13,16
including VAT
19%
, [plus shipping]
CTS DPDT-XL-500k log
High quality long shaft (19mm) 500k log CTS potentiometer with Push-pull DPDT switch. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Perfect for phase switching, coil tapping, series/parallel, etc.
€11,00
including VAT
19%
, [plus shipping]
CTS MINI-BLEND-KN 250k lin
CTS 17mm stereo balance/blend linear taper potentiometer with center detent. Knurled split shaft. Includes nut and washer.
These high quality audio potentiometers made by CTS are suitable for use in both professional and consumer applications. The most popular applications are electric guitars, sound processing equipment, and sound system amplifiers.
These high quality audio potentiometers made by CTS are suitable for use in both professional and consumer applications. The most popular applications are electric guitars, sound processing equipment, and sound system amplifiers.
€7,93
including VAT
19%
, [plus shipping]
CTS MINI-BLEND-KN 500k lin
CTS 17mm stereo balance/blend linear taper potentiometer with center detent. Knurled split shaft. Includes nut and washer.
These high quality audio potentiometers made by CTS are suitable for use in both professional and consumer applications. The most popular applications are electric guitars, sound processing equipment, and sound system amplifiers.
These high quality audio potentiometers made by CTS are suitable for use in both professional and consumer applications. The most popular applications are electric guitars, sound processing equipment, and sound system amplifiers.
€7,93
including VAT
19%
, [plus shipping]
CTS MINI-KN 250k log
CTS 17mm mono, audio taper potentiometer. Knurled split shaft. Includes nut and washer.
These high quality audio potentiometers made by Bourns are suitable for use in both professional and consumer applications. The most popular applications are electric guitars, sound processing equipment, and sound system amplifiers.
These high quality audio potentiometers made by Bourns are suitable for use in both professional and consumer applications. The most popular applications are electric guitars, sound processing equipment, and sound system amplifiers.
€6,44
including VAT
19%
, [plus shipping]
CTS MINI-KN 500k log
CTS 17mm mono, audio taper potentiometer. Knurled split shaft. Includes nut and washer.
These high quality audio potentiometers made by Bourns are suitable for use in both professional and consumer applications. The most popular applications are electric guitars, sound processing equipment, and sound system amplifiers.
These high quality audio potentiometers made by Bourns are suitable for use in both professional and consumer applications. The most popular applications are electric guitars, sound processing equipment, and sound system amplifiers.
€6,44
including VAT
19%
, [plus shipping]
CTS MTL-SS-250k lin
CTS potentiometer with metal axis. Includes nut, lock and dress washer. Axis diameter: 6,3mm. Solid full shaft. Thread bushing length: 9,5mm (3/8 inch). 250k lin. Most commonly used in American amps and guitars. Smooth action - top quality!
€5,40
including VAT
19%
, [plus shipping]
CTS MTL-XL-1M lin
CTS potentiometer with metal axis and extra long thread. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Extra long thread bushing length: 19mm (3/4 inch). 1M lin. Most commonly used in American amps and guitars. Smooth action - top quality!
€9,39
including VAT
19%
, [plus shipping]
CTS MTL-XL-300k lin
CTS potentiometer with metal axis and extra long thread. Includes nut, lock and dress washer. Axis diameter: 6,0mm. Split knurled shaft. Extra long thread bushing length: 19mm (3/4 inch). 300k lin. Most commonly used in American amps and guitars. Smooth action - top quality!
€9,39
including VAT
19%
, [plus shipping]
CTS Dimple SS-5k lin
Custom made CTS 5k lin 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 1/4 inch (6,35mm).
€6,96
including VAT
19%
, [plus shipping]
CTS Dimple SS-10k log
Custom made CTS 10k log 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).
€6,96
including VAT
19%
, [plus shipping]
CTS Dimple SS-25k lin
Custom made CTS 25k lin 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 1/4 inch (6,35mm).
€7,44
including VAT
19%
, [plus shipping]
CTS Dimple SS-100k lin
Custom made CTS 100k lin 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).
€7,44
including VAT
19%
, [plus shipping]
CTS Dimple SS-100k log
Custom made CTS 100k log 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).
€7,44
including VAT
19%
, [plus shipping]
CTS Dimple SS-250k lin
Custom made CTS 250k lin 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).
€7,44
including VAT
19%
, [plus shipping]
CTS Dimple SS-250k log
Custom made CTS 250k log 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm). 30% Audio taper.
€7,44
including VAT
19%
, [plus shipping]
CTS Dimple SS-250k log-30
Custom made CTS 250k 'Dimple Back' potentiometer with a special Vintage Audio Taper (30% Log). 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 1-4 inch (6,4mm).
€8,03
including VAT
19%
, [plus shipping]
CTS Dimple SS-50k REV log
Custom made CTS 50k REV log 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).
€7,44
including VAT
19%
, [plus shipping]
CTS Dimple SS-500k log
Custom made CTS 500k log 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).
€7,44
including VAT
19%
, [plus shipping]
CTS Dimple SS-3M REV log
Custom made CTS 3M REV log 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 1/4 inch (6,35mm).
€7,44
including VAT
19%
, [plus shipping]
CTS Dimple SS-1M log
Custom made CTS 1M log 'Dimple Back' potentiometer. 6,35mm solid shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).
€7,44
including VAT
19%
, [plus shipping]
CTS Dimple KN-250k log-30
Custom made CTS 250k 'Dimple Back' potentiometer with a special Vintage Audio Taper (30% Log). 6,0mm knurled split shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 1/4 inch (6,35mm).
€7,44
including VAT
19%
, [plus shipping]
CTS Dimple KN-500k log-30
Custom made CTS 500k 'Dimple Back' potentiometer with a special Vintage Audio Taper (30% Log). 6,0mm knurled split shaft. Thread diameter: 3/8 inch (9,4mm). Thread length: 3/8 inch (9,4mm).
€7,44
including VAT
19%
, [plus shipping]