Home > Amp Parts > Hardware > Amp Hardware

Amp Hardware

Products

Amp-Speaker Cable 1m
Speaker cable, commonly used on combo amplifiers. Length: 1m. Vintage style cloth covered wire (black and white). Right angle 1/4 inch plug to Spade Terminals, female.
€11,97
including VAT 19% , [plus shipping]
Qty
ANGEL-0,2kg
Mundorf MSilence TWARON Angel Hair 0,2kg
€69,64
including VAT 19% , [plus shipping]
Qty
Audio Foam 200x100cm 3cm Black
Audio Sound Foam Panel, black. Size: 200x100cm. Height: 3cm. High acoustic quality. Made in Germany.
€43,91
including VAT 19% , [plus shipping]
Qty
Audio Foam 200x100cm 4cm Black
Audio Sound Foam Panel, black. Size: 200x100cm. Height: 4cm. Highest acoustic quality. Made in Germany.
€48,79
including VAT 19% , [plus shipping]
Qty
Black Dish 2J2D Horizontal
Black metal dish plate, punched for 2x Jack and 2x Neutrik D-Series connectors. Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).
€4,08
including VAT 19% , [plus shipping]
Qty
Black Dish 8D
Black metal dish plate, punched for 8x Neutrik D-Series connectors. Made of 1,2mm (18 gauge) steel. Dish Depth: 16mm (5/8 inch).
€12,38
including VAT 19% , [plus shipping]
Qty
Blank Dish Black 112x102mm
Blank Dish with Black finish. Size: 112x102mm. Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).
€4,08
including VAT 19% , [plus shipping]
Qty
Blank Dish Black 130x89mm
Blank Dish with Black finish. Size: 130x89mm. Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).
€4,08
including VAT 19% , [plus shipping]
Qty
Blank Dish Zinc 130x89mm
Blank Dish with Zinc finish. Size: 130x89mm. Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).
€3,50
including VAT 19% , [plus shipping]
Qty
Brass Vent Small
Brass vent grill for VOX-style amps (no logo). Dimensions: 4 3/4 x 3/4 inch (120,65 x 19mm).
€9,40
including VAT 19% , [plus shipping]
Qty
Cable Feedthrough Dish
Recessed Rubber Cable Feedthrough Dish 130 x 89mm (5.2 x 3.5 inch). You can pass cabling that is stored inside the case coiled or on a spool through the rubber moulded flaps to hold it in place and prevent it from retreating back inside the case. With this dish, there's no longer a need to take the cabling out or open the lid to unwind.
€11,88
including VAT 19% , [plus shipping]
Qty
Cable Feedthrough Dish with Offset
Recessed Rubber Cable Feedthrough Dish 130 x 89mm (5.2 x 3.5 inch) with offset. You can pass cabling that is stored inside the case coiled or on a spool through the rubber moulded flaps to hold it in place and prevent it from retreating back inside the case. With this dish, there's no longer a need to take the cabling out or open the lid to unwind.
€11,88
including VAT 19% , [plus shipping]
Qty
Cap Can Cover Tweed Amps
Tweed Amp capacitor can cover for Tweed Bassman and Tweed Twin. Also suited for 6G15 chassis. Size: 139mm x 102mm. Depth: 38mm. Mounting holes: 127mm x 76mm.
€19,50
including VAT 19% , [plus shipping]
Qty
Chassis straps, large (2 pieces)
Package of two straps with screws and nuts, for Fender amps.
5 inch (12,7cm) center-to-center length.
€16,26
including VAT 19% , [plus shipping]
Qty
Chassis straps, medium (2 pieces)
Package of two straps with screws and nuts, for Fender amps.
4 inch (10,16cm) center-to-center length.
€16,26
including VAT 19% , [plus shipping]
Qty
Chassis straps, small (2 pieces)
Package of two straps with screws and nuts, for Fender amps.
3 inch (7,61cm) center-to-center length.
€16,26
including VAT 19% , [plus shipping]
Qty
Dish 1D Black
Black metal dish plate, punched for 1x Neutrik D-Series connectors. Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).
€4,08
including VAT 19% , [plus shipping]
Qty
Dish 1D Zinc
Zinc metal dish plate, punched for 1x Neutrik D-Series connectors. Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).
€3,50
including VAT 19% , [plus shipping]
Qty
Dish 1J Black
Black metal dish plate, punched for 1x Jack connector. Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).
€4,08
including VAT 19% , [plus shipping]
Qty
Dish 1x IEC Black
Black metal dish plate, punched for 1x IEC Power Inlet. Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).
€4,08
including VAT 19% , [plus shipping]
Qty
Dish 1x IEC Zinc
Zinc metal dish plate, punched for 1x IEC Power Inlet. Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).
€3,50
including VAT 19% , [plus shipping]
Qty
Dish 2D Black
Black metal dish plate, punched for 2x Neutrik D-Series connectors. Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).
€4,08
including VAT 19% , [plus shipping]
Qty
Dish 2D Zinc
Zinc metal dish plate, punched for 2x Neutrik D-Series connectors. Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).
€3,50
including VAT 19% , [plus shipping]
Qty
Dish 2D-ANG Black
Black angled metal dish plate, punched for 2x unified XLR connectors (e.g. Neutrik D, Speakon NL4MP, Powercon). Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).
€7,74
including VAT 19% , [plus shipping]
Qty
Dish 2D-UNI Black
Black metal dish plate, punched for 2x unified XLR connectors (e.g. Neutrik D, Speakon NL4MP, Powercon). Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).
€5,27
including VAT 19% , [plus shipping]
Qty
Dish 2D-UNI Zinc
Zinc metal dish plate, punched for 2x unified XLR connectors (e.g. Neutrik D, Speakon NL4MP, Powercon). Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).
€3,50
including VAT 19% , [plus shipping]
Qty
Dish 2J Black
Black metal dish plate, punched for 2x Jack connectors. Made of 1,2mm (18 gauge) steel. Dish Depth: 13mm (1/2 inch).
€4,08
including VAT 19% , [plus shipping]
Qty
Dish 4D Black
Black metal dish plate, punched for 4x Neutrik D-Series connectors. Made of 1,2mm (18 gauge) steel. Dish Depth: 16mm (5/8 inch).
€11,82
including VAT 19% , [plus shipping]
Qty
Dish 4D Zinc
Zinc metal dish plate, punched for 4x Neutrik D-Series connectors. Made of 1,2mm (18 gauge) steel. Dish Depth: 16mm (5/8 inch).
€11,29
including VAT 19% , [plus shipping]
Qty
Felt Pads 22mm
Felt pads, ideal to acoustically decouple things.
22mm diameter, adhesive back. Set with 16 pieces.
€2,77
including VAT 19% , [plus shipping]
Qty
Fender Capacitor Cover, large
Original Fender replacement. Capacitor Cover for reissue Fender Twin Reverb amps.
7 1/8" L x 3 ½ " W x 1 ¼" H.
€29,85
including VAT 19% , [plus shipping]
Qty
Fender Capacitor Cover, medium
Original Fender replacement. Capacitor Cover for reissue Fender Vibroverb amps.
5 3/4" L x 3" W x 1 ¼" H.
€36,30
including VAT 19% , [plus shipping]
Qty
Fender Capacitor Cover, small
Original Fender replacement. Capacitor Cover for reissue Fender Bassman amps.
5" L x 3" W x 1 ¼ H.
€46,62
including VAT 19% , [plus shipping]
Qty
Fender Tilt Back Legs, 14 inch
Original Fender heavy duty parts. Small, 14". Package contains two legs. Hardware included.
€66,46
including VAT 19% , [plus shipping]
Qty
Fender Tilt Back Legs, 16 inch
Original Fender heavy duty parts. Medium, 16". Package contains two legs. Hardware included.
€68,34
including VAT 19% , [plus shipping]
Qty
Fender Tilt Back Legs, 19 inch
Original Fender heavy duty parts. Large, 19". Package contains two legs. Hardware included.
€82,91
including VAT 19% , [plus shipping]
Qty
GNA Chassis Strap Nut
Nut for Chassis strap screws. Also commonly used to fasten transformers. Size: 8-32x3.25, Keps, Zinc. Single piece.
€1,21
including VAT 19% , [plus shipping]
Qty
GNA Chassis Strap Screw
#8-32 x 3-1/4 inch (82,5mm) chassis strap screw. Single piece.
€2,03
including VAT 19% , [plus shipping]
Qty
Insulation wool, black
Insulation wool for cabinets. Excellent absorbation characteristics. For temperatures up to 140' Celsius. Thickness: 40mm. Width: 350mm. Length 500mm. Volume: 20 l. Black.
€7,14
including VAT 19% , [plus shipping]
Qty
Insulation wool, white
Insulation wool for cabinets. Excellent absorbation characteristics. For temperatures up to 140' Celsius.Thickness: 40mm. Width: 350mm. Length: 500mm. Volume: 20 l. White.
€7,14
including VAT 19% , [plus shipping]
Qty
Jack Plate Plug-and-Play
Plug-and-Play jackplate. stereo/mono jack plate for back of cabinets. Outside dimensions: 110 x 102mm. Hole-to-hole dimensions (center-to-center): 95 x 83mm.
€31,93
including VAT 19% , [plus shipping]
Qty
Lid Dish for Rubber Foot
Lid Dish for Rubber Foot, Zinc finish. These steel lid dishes allow you to stack cases with rubber feet, providing a more secure and stable method than before.
€1,71
including VAT 19% , [plus shipping]
Qty
Louvre Dish 1x4 Vertical Zinc
Louvre Dish 1x4 Vertical. Made of 1,2mm (18 gauge) steel. Zinc finish.
€4,08
including VAT 19% , [plus shipping]
Qty
Louvre Dish 2x4 Horizontal
Louvre Dish 2x4 Horizontal. Made of 1,2mm (18 gauge) steel. Dish Depth: 7mm (1/4 inch). Zinc plated.
€6,43
including VAT 19% , [plus shipping]
Qty
Marshall Anti-skid tray.
Marshall anti-skid tray. As used on top of Marshall cabinets. Original Marshall replacement part.
€17,42
including VAT 19% , [plus shipping]
Qty
Marshall back metal panel
Marshall back metal panel. As used on JCM 800. Original Marshall replacement part.
€119,56
including VAT 19% , [plus shipping]
Qty
Marshall Caster Cups Straight
Marshall Caster cups for straight cabinets. Package contains 4 caster cups.
€8,15
including VAT 19% , [plus shipping]
Qty
Marshall jack cup
Original Marshall Cabinet parts.
€12,13
including VAT 19% , [plus shipping]
Qty
Marshall large plastic vent
Original Marshall replacement part. Large plastic vent. It measures 17 5/8 inch in length and 3 inch in width.
€13,41
including VAT 19% , [plus shipping]
Qty
Marshall mono jack plate
Mono jack plate for back of cabinets. Original Marshall Cabinet parts.
€86,41
including VAT 19% , [plus shipping]
Qty
Marshall Switchable jack plate
Original Marshall replacement part. Switchable stereo/mono jack plate for back of cabinets. Part number 193X-50-01-S.
€52,57
including VAT 19% , [plus shipping]
Qty
Marshall Top metal vent
Original Marshall Cabinet parts.
€24,78
including VAT 19% , [plus shipping]
Qty
Metal Recessed Jack Plate
Recessed for mounting speaker cabinet jacks. Diameter: 49,5mm.
€1,29
including VAT 19% , [plus shipping]
Qty
Metal Speaker Grill 10"
Metal grill 10 inch (256mm) with flat black finish and rubber edge trim. Mounting brackets are sold seperately (SKU19906).
€6,37
including VAT 19% , [plus shipping]
Qty
Metal Speaker Grill 12"
Metal grill 12 inch (307mm) with flat black finish and rubber edge trim. Mounting brackets are sold seperately (SKU19906).
€10,27
including VAT 19% , [plus shipping]
Qty
Metal Speaker Grill 15"
Metal grill 15 inch (380mm) with flat black finish and rubber edge trim. Mounting brackets are sold seperately (SKU19906).
€12,83
including VAT 19% , [plus shipping]
Qty
Metal Speaker Grill 5"
Metal grill 5 inch (130mm) with flat black finish and rubber edge trim. Mounting brackets are sold seperately (SKU19906).
€1,93
including VAT 19% , [plus shipping]
Qty
Metal Speaker Grill 8"
Metal grill 8 inch (200mm) with flat black finish and rubber edge trim. Mounting brackets are sold seperately (SKU19906).
€7,22
including VAT 19% , [plus shipping]
Qty
MNT-GRILL-4pcs Speaker Grill Mounting Bracket
Mounting brackets for speaker grills. Useable on all cabinets and speaker grills. Set contains 4 brackets and 4 screws.
€2,08
including VAT 19% , [plus shipping]
Qty
Perforated Dish 178x127mm
Perforated Dish 178x127mm. Made of 1,2mm (18 gauge) steel. Dish Depth: 7mm (1/4 inch). Black.
€8,03
including VAT 19% , [plus shipping]
Qty
Plastic Double Jack Plate
Plastic jack plate for two 6,3mm jacks. Dimensions: 3 3/8 x 3 3/8 inch. Perfect for British style 4x12 extensions cabs.
€2,93
including VAT 19% , [plus shipping]
Qty
Recess Dish 178x127mm Black
Recess Dish 178x127mm. Plain. Perfect to siot tour labels. Black finish. Made of 1,2mm (18 gauge) steel. Dish Depth: 16mm (5/8 inch).
€5,75
including VAT 19% , [plus shipping]
Qty
Recess Dish 178x127mm Zinc
Recess Dish 178x127mm. Plain. Perfect to siot tour labels. Zinc finish. Made of 1,2mm (18 gauge) steel. Dish Depth: 16mm (5/8 inch).
€4,95
including VAT 19% , [plus shipping]
Qty
Speaker Cable Spades to 6,3mm - 43cm
Vintage style speaker cable. 6,3mm audio plug to (2) spade lugs. Perfect replacement for vintage guitar amps where the speaker plugs directly into the chassis. 43cm (17 inch) total length.
€4,76
including VAT 19% , [plus shipping]
Qty
Speaker Cable Spades to 6,3mm - 86cm
Vintage style speaker cable. 6,3mm audio plug to (2) spade lugs. Perfect replacement for vintage guitar amps where the speaker plugs directly into the chassis. 86cm (34 inch) total length.
€6,70
including VAT 19% , [plus shipping]
Qty
Speaker Cable Spades to 6,3mm - Stereo - 43cm
Vintage style speaker cable. 6,3mm stereo audio plug to (2) spade lugs. Perfect replacement for vintage guitar amps where the speaker plugs directly into the chassis. 43cm (17 inch) total length.
€5,36
including VAT 19% , [plus shipping]
Qty
Speaker Cable Spades to Spades - 38cm
Speaker connector cable. (2) spade lugs to (2) spade lugs. 38cm (15 inch) total length.
€1,19
including VAT 19% , [plus shipping]
Qty
Speaker Grill SI-6,5
Metal speaker grill 6,5 inch (165mm). Mechanically highly stable. Screwable ring. Black color.
€3,96
including VAT 19% , [plus shipping]
Qty
Speaker Twisted Wire Connectors
Pair of black/white Twisted wire for connecting speakers.
€5,16
including VAT 19% , [plus shipping]
Qty
UNICORN-0,2kg
Mundorf MSilence TWARON Unicorn. Package with 200g.
€69,64
including VAT 19% , [plus shipping]
Qty
 
The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.